Email:info@htpipe.com

products

PRODUCT

Special Products
BW Pipe Fittings
Forged Pipe Fittings
Steel Pipe Tube
Flanges
Fasteners
Steel Sheet Plate
Round Bar
Welding Wire Electrodes
Prefabrication Pipe Spools
  • ASTM B407 UNS N08811 seamless pipe tube

ASTM B407 UNS N08811 seamless pipe tube

  • Material Standard: ASTM B407
  • Grade No: Alloy 800HT, UNS N08811, 1.4959, 1.4876
  • Type: Seamless Pipe and Tube
  • End: Beveled End,Plain End

PRODUCT DESCRIPTION

Incoloy 800HT(UNS N08811, 1.4959, 1.4876) is a full austenitic low carbon nickel-iron-chromium alloy of the same series as Incoloy 800. The cobalt content in this alloy can be strictly controlled below 0.01%.  Alloy 800HT has excellent creep strength at temperatures above 1290°F (700°C). If the application involves frequent temperature excursions under 1290°F (700°C) or parts of are permanently exposed to a temperature below 1290°F (700°C), Alloy 800H should be utilized. The high temperature resistance of Alloy 800HT is comparable to Alloy 800H.

Incoloy 800HT is resistant to many corrosive media. Its high nickel content makes it resistant to stress corrosion cracking in aqueous corrosion conditions. The high chromium content provides better resistance to pitting and crevice corrosion cracking. The alloy has good corrosion resistance to nitric acid and organic acids, but limited corrosion resistance in sulfuric acid and hydrochloric acid. Good corrosion resistance in oxidizing and non-oxidizing salts, in addition to the potential for pitting corrosion in halides. It also has good corrosion resistance in water, steam and mixtures of steam, air and carbon dioxide.

HT PIPE provide Incoloy 800HT Seamless and Welded Pipes for the Oil and Gas, Petrochemical and Power Industries. Incoloy pipes supplier in China. ASTM B407 Incoloy 800HT Seamless pipe, Incoloy 800HT Seamless tube,  1.4959 Incoloy Seamless pipe, 1.4876 Seamless tube, Incoloy seamless pipe and tube supplier, exporter.
The Chemical Composition of Incoloy 800HT, %
Ni Cr Fe Ti Al C Mn P Si S Al & Ti
30.0-35.0 19.0-23.0 39.5 0.25-0.60 0.25-0.60 0.06-0.10 1.5 0.045 1 0.015 0.85-1.20
Incoloy 800HT has the following properties
●Excellent corrosion resistance in very high temperature aqueous media up to 500℃
●Good resistance to stress corrosion
●Good workability
Physical Properties of Incoloy 800H
Density: 8.0 g/cm3
Melting point: 1350-1400 ℃
Incoloy 800HT Mechanical Properties
Mechanical properties Tensile, min, ksi[MPa] Yield, min, ksi[MPa] Elongation, %(min)
Incoloy 800HT 65[450] 25[170] 30
Incoloy 800HT Equivalent Grades
STANDARD WERKSTOFF.NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800HT 1.4959 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

Please fill in your procurement needs and contact information

  • * Your Mail :
  • Your Tel :
  • Your Name :
  • Your Company :
  • * Your inquiry :