304 316 321 dn40 stainless steel pipe fitting female or male elbows

The UNS S32750 standard of Pipe Fittings consists of 25% chromium, 4% molybdenum, and 7% nickel. The UNS S32750 Pipe Fittings have a 50-50 microstructure of ferritic and austenitic steel grades with improved strength.

Both materials remain available, subject to commercial considerations, and certain specifications which restrict the service temperature of some grades of INCOLOY alloy 800H.

We manufacture SA403 WP 304 Short Radius and Long Radius Elbows very strong with a minimum yield strength of 205MPa and a minimum tensile strength of 515MPa. These work well in high temperature environments up to 870 degrees Celsius.

The alloy matrix is strengthened by the interaction of niobium with molybdenum that offers high strength without the need for precipitation-hardening treatment.

ASTM B163 B407 ASME SB163 SB407 N08800 Incoloy 800 Seamless Pipe is especially suitable for high temperature equipment in the petrochemical industry because the alloy does not form an embrittled sigma phase after prolonged exposure to 1200¡ãF (649¡ãC).

309 Pipe Fittings are manufactured and finished according to international standards ASTM A403 WP309, ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28

Advantages of 304/304L stainless steel pipe fittings, 304/304L flanges Excellent corrosion resistance in a wide range of atmospheric environments, good oxidation resistance in intermittent use at 870¡ãC and continuous use at 925¡ãC, good Resistant to carbide precipitation, good machinability, stainless steel 304H provides higher strength at elevated temperatures and excellent weldability with and without filler metals.

Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90¡ã to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings.

SA234 WPB Elbow is made up of carbon steel or alloy steel.

Hastelloy B2 pipe bend is a nickel-molybdenum alloy particularly suited for equipment handling reducing chemical environments.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

C22 has excellent resistance to chloride-induced localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Stainless steel 316 pipe fittings are a product made of grade 316. It is also called marine grade. These UNS S31600 SS elbows are said to have better mechanical and corrosion resistance properties than other stainless steel grades. Although stainless steels are often referred to as austenitic steels, with nickel and chromium alloys SA403 WP316 SS Stub has molybdenum added to the ends to improve its resistance to pitting corrosion.

Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure.

Sanitary Weld Elbows are perfect for permanent assembly on processing systems that require a change of fluid direction. These fittings require robust welding for installation that offers high integrity and durability in applications that require longevity and cleaning in place (CIP).

Grade 825 Incoloy alloy used to make butt welded pipe fittings has high corrosion resistance. It contains a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic structure.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Duplex steel S31803 / S32205 butt welded pipe fittings, manufactured to international quality standards, using high-grade steel. Duplex Steel S31803 Elbow Butt Weld Fittings are stainless steel, a type of stainless steel designed to improve resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Duplex steel S32205 tee butt welded pipe fittings are often used in chemical process industries: such as sulfuric acid production, nitric acid process, phosphoric acid process, ethylene oxide, polypropylene production, PVC, equipment for handling organic and fatty acids, chemical storage and tankers, thermal Duplex steel S31803 reducer fittings such as exchangers are resistant to chloride environments and sulfide stress corrosion.

Titanium is considered to be a strong metal with an ultimate tensile strength of 434 MPa that makes 63,000 psi which is roughly equal to the strength of a low-grade steel alloy.

S32750 duplex pipe fittings is one of the buttweld fittings and is available in various shapes, sizes and specifications. This is used in marine industries, nuclear projects, power plants and other chemical industries. The durability of ASTM A815 WPS S32750 Fittings is excellent and the specification of this has two types i.e.

The resistance of the Monel 2.4360 eccentric/concentric reducer to salt solutions and its excellent resistance to stress-related corrosion cracking make the Monel 2.4360 eccentric/concentric reducer ideal for surviving in most freshwater bodies.

Stainless steel 304 for resistance to corrosion and high temperatures. It has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This 90-degree unpolished weld elbow with tangent sanitary fitting is suitable for use in food, beverage, and dairy applications.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Process piping systems rarely travel in a straight line from process to process.

304 stainless steel elbow is a pipe fitting that connects two pipes with the same or different nominal diameters in the piping system, so that the pipes are bent at a certain angle. According to the angle, the most commonly used are 45¡ã, 90¡ã, 180¡ã. In addition, according to engineering needs, other abnormal angle elbows such as 60¡ã are also included. The connection methods with the pipeline include direct welding (the most common method), flange connection, threaded connection, socket connection, etc.

Nickel Alloy 600 works well with most alkaline solutions and sulfur compounds and also provides lower rate of attack from chlorine or hydrogen chloride.