316 flex pipe for genset

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

Grade 316 is also primarily composed of iron, and again contains significant amounts of nickel and chromium¡ª10-14% and 16-18%, respectively¡ªand small amounts of carbon, manganese, molybdenum, and silicon. For this reason, grade 316 stainless steel is often preferred for use in marine environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.67

Inconel 718 alloy is used in large quantities in extreme environments, such as high-speed airframe components, cryogenic storage components, nuclear reactors, chemical processing, and gas turbine engine components.

Stainless steel flange is a kind of general steel material, which is widely used in equipment and parts with good comprehensive performance requirements (corrosion resistance and molding).

Industrial name of inconel 600 are alloy 600, inco 600, nickel 600.

There are studs, washers, threaded rods, screws, etc. Each type of fastener has its own advantages and application requirements. Carbon steel screws can be used without nuts. It can be driven with a screwdriver.

ASTM B564 Incoloy 825 Flanges Incoloy 825 Flanges are one such type of flanges that have outstanding resistance to oxidizing as well as reducing acids. They are fabricated to improve their resistance to corrosion and are clean to weld

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Inconel 718 flanges are the highest quality finishing fittings for long life, high pressure and zero defects. Inconel 718 flanges are alloys that maintain strength, toughness and corrosion resistance in high temperature environments. These alloys are used in a variety of industries and valuable applications such as oil refineries, chemical plants and power generation, nuclear power, aerospace and more.

N04400 is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Alloy N04400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acid-like substances), brine, hydrofluoric acid, and sulfuric acid. Other advantages of using this alloy are toughness and high strength over a wide temperature range; it can also be manipulated to be magnetic if desired.

The idea of duplex stainless steels dates back to the 1920s with the first cast being made at Avesta in Sweden in 1930. However, it is only in the last 30 years that duplex steels have begun to ¡°take off¡± in a significant way. This is mainly due to advances in steelmaking techniques particularly with respect to control of nitrogen content.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Nickel 400 Annealed Pipe, which is also referred to as a superalloy can be annealed at a temperature of 926¡ãC.

SS 316/316L/316Ti round bars/rods are made from chemical compositions such as carbon, nickel, copper, chromium, titanium, iron and manganese. These rods and rods are designed with physical and mechanical properties such as density, yield strength, tensile strength, elongation, thermal conductivity, electrical conductivity, modulus of expansion, and electrical expansion.

Incoloy 800 Sheets are a combination of nickel, chromium and iron alloys with advantages and properties such as excellent oxidation resistance, high temperature carburization and medium or high strength and excellent resistance to name a few.

The combined effects of mechanical and thermal processing of Incoloy Alloy 800HT permit higher design stresses to be incorporated than are permitted for the conventional Alloy 800H.

Pure Titanium condenser tube is corrosive resistant and strong.

Carbon steel pipe is the most common use piping material in different industries served for construction, structural, liquid transmissions for water, oil and gas. Typical carbon steel pipe material grades in API 5L Grade B, X42 to X70, ASTM A106 B, ASTM A53 B, ASTM A252 Grade 3 and ASTM A333 Grade 6 etc.Mineral and slurry pipe is for the line pipe that applied in mining industries. A slurry pipeline is designated to transmit ores (Iron, Coal materials), or the industry mining waste, we called the pipeline as taillings. And generally these steel pipes connected in a long distances. Above materials mixed with water, we call slurry. People will use pumps to transport to the final destination then water will be filtered out. Since slurry contained different materials some with abrasive properties, so the pipe could be coated with 3PE, FBE layers to against from corrosion.
Both carbon steel pipe in seamless or welded could be used for the transmission of the slurry. So there is a wide range of material and standards available options to suit for the special working conditions.

Hastelloy B3 Blind Flanges have good creep, and oxidation¡¯s resistance. Hastelloy B3 Weld Neck Flanges isn¡¯t recommended for use in the presence of ferric or cupric mariners because these mariners can bring unseasonable failure.

A105 Flanges are disc-shaped parts, which are the most common in pipeline engineering. Flanges are used in pairs and matched with them on valves. In pipeline engineering, flanges are mainly used for pipeline connections. In the pipelines that need to be connected, flanges can be installed in a variety of ways. Wire connection flanges can be used for low-pressure pipelines, and welding flanges can be used for pressures above 4 kg. Add a washer between the two flanges, then tighten with the bolts.

HASTELLOY X is a wrought nickel-based alloy with excellent high temperature strength and oxidation resistance. All product forms are excellent in forming and welding. Although HASTELLOY X is primarily known for its heat and oxidation resistance, it also has good resistance to chloride stress corrosion cracking and good carburization, as well as excellent resistance to reducing or carburizing atmospheres. Alloy X is one of the most widely used nickel-based superalloys for gas turbine engine components.

At the same time, depending on the heat treatment of these stainless steel 304 cross pipe fittings, we may do solution treatment, annealing treatment, or aging treatment according to the needs of our esteemed customers. And depending on the surface finish of these stainless steel 304L reducer fittings, we can offer them in black finish, polished to glossy, peeled to glossy, or roughed to glossy.

Hastelloy C22 flanges are available in different sizes and shapes. One can easily get it at their doorstep as per their specifications.

Type 304L is a variant of Type 304 with a low carbon content to improve weldability and reduce the risk of reduced corrosion resistance around the weld. The yield strength and tensile energy of Type 304L are also slightly reduced compared to Type 304.

Incoloy 825 is a superalloy with molybdenum and copper added to Incoloy 800. This makes Alloy 825 superior to Alloy 800 in terms of corrosion resistance.

Alloy 800H/800HT is frequently used in applications that involve long-term exposure to elevated temperatures where resistance to oxidation, carburization and other types of elevated temperature corrosion is required.

For 304L stainless steel pipe, the range of carbon content in the steel affects the corrosion resistance of the tank. During the welding of steel, a phenomenon called “chromium carbide precipitation” occurs at temperatures between 800 and 1500¡ãF (425 and 815¡ãC). Chromium combines with carbon in the heat affected zone and precipitates as chromium carbide at grain boundaries. As a result, it significantly reduces the corrosion resistance of the steel in this area. Due to the lower carbon content of 304L steel, the risk of chromium carbide precipitation is greatly reduced.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

It is well known that Hastelloy c22/C276 fasteners have good dimensional accuracy, corrosion resistance, durability, high durability, high flexibility, strong structure, high tensile strength and other characteristics. In addition, fasteners are resistant to wear in high temperature atmospheres and corrosive environments. Some of the environments in which these fasteners exhibit resistance are oxidizing media, reducing media, chloride environments, and sulfur environments. They are resistant to attack by chemicals such as nitric acid, chlorine, sulfur, acetic acid, organic, inorganic, phosphorus, etc.

The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Incoloy 800H/HT alloy was intended for high temperature structural applications.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

They also have excellent resistance to corrosion cracking and localized corrosion such as pitting, intergranular and crevice. Unlike other standard austenitic steels, UNS S31803 steel has excellent magnetic properties.