1 – 1/2″ high pressure flange adapter Inconel 718 flanges N07718 flanges

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 718 flanges are high yield flanges known to maintain their tensile strength even at high temperatures. They are resistant to a variety of severely corrosive environments. The nickel content in these flanges helps them last long in temperatures ranging from cryogenics to 1200°F.

Fasteners have excellent resistance to pitting and crevice cracking. In addition, we offer fasteners with excellent resistance to water corrosion, general corrosion and chloride stress corrosion cracking.

The Alloy 601 Flanges have 550MPa minimum tensile strength, 205MPa minimum yield strength and 30% elongation rate.

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

The alloy is not precipitation hardenable; it is hardened and strengthened only by cold work. The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000¡ãF (1095¡ãC).

The alloy is ductile and readily forms Inconel 601 fasteners. It has high mechanical strength, good toughness and excellent corrosion resistance.

Inconel 625 round bar is a nickel-chromium-molybdenum-based alloy. This makes it very good at resisting non-oxidizing environments. They are widely used in the manufacturing sector of the economy.

Alloy 625 (UNS N06625) is a nickel-chromium alloy that is hardened by the addition of molybdenum and niobium, so the alloy does not need to be aged. It has excellent resistance to various corrosive environments and the high temperature effects of oxidation and carburization.

Inconel 601 is an alloy composed of nickel and chromium.

The Inconel 600 Seamless Pipes have many features like good workability, durability, readily weldable, high strength and mechanical property as well. There are various types of Inconel 600 pipes are available such as welded, seamless, square, rectangular, thick wall, thin wall, electro polished, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Nickel alloy Inconel 625 is commonly used in propeller blades, propulsion motors, submersible accessories, marine instruments and many other applications.

There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

Inconel is an austenitic superalloy whose main alloying materials are nickel and chromium. This nickel based ASTM B166 Inconel 600 gasket is designed for applications ranging from low temperatures to high temperatures up to 2000¡ãF. The main feature of these alloy 600 screws is their enhanced corrosion resistance and high temperature resistance. The increased tensile strength of Inconel 600 is enhanced by solid solution strengthening.

All our Inconel 600 Flanges conform to relevant material and dimensional specifications and can be supplied complete with material certificates to EN 10204 3.1.

Inconel 718 is an age hardenable alloy chromium alloy that combines corrosion resistance, high strength and good machinability. High creep rupture strength at temperatures up to 700¡ãC.

Unlike chrome-nickel steel, this steel does not reduce corrosion resistance due to carbide precipitation. Inconel WNR 2.4668 Nuts are used in excellent procedures including welding materials to more or less materials of the same chemical composition, this is used in the manufacture of tools for the management of sulfuric and phosphoric acids.

Inconel 718 is a precipitation hardenable nickel-chromium alloy with high creep rupture strength at elevated temperatures around 700oC (1290oF). It is stronger than Inconel X-750 and has better mechanical properties at low temperatures than Nimonic 90 and Inconel X-750.

Alloy 600’s high chromium content makes it significantly more resistant to oxidation than pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy has a high level of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.

It is used in high stress applications at elevated temperatures. The Inconel 625 Tube can be used in heat exchangers, condensers and in boiler components for this reason.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel 625 round bar is extremely corrosion resistant in a variety of extremely corrosive environments.

Inconel 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels.

The alloy is also resistant to ammonia-containing atmospheres as well as nitrogen and carburizing gases.

Inconel 718, UNS N07718, is the most common hardenable Inconel grade. This precipitation hardening nickel-chromium alloy combines excellent corrosion resistance with high strength at elevated temperatures.

Alloy 600 is a nickel-chromium-iron alloy used in applications requiring corrosion and heat resistance. This alloy has excellent mechanical properties and exhibits an ideal combination of high strength and good machinability over a wide temperature range.

If used in the paper industry, the ANSI B16.5 Slip on Flange has a good notable performance. Also, the Inconel 600 Weld Neck Flange has excellent immunity to chlorine ion stress corrosion cracking.

An Inconel 718 Fastener is a hardware device that joins or holds materials together, usually as a non-permanent connection. Joints can be non-permanent or permanent; the joined tool can be easily detached without damaging the previous joint, if the latter joint is damaged or reduced in strength.

The main applicants of Alloy 625 Forging Flanges include industries like marine and petroleum industries. Other advantages of using the Inconel 625 Flanges involves high fracture toughness as well as fabricability.

Inconel 625 combines heat resistance, corrosion resistance and strength. Inconel 625 fasteners are used in environments ranging from low temperatures to 1800o F (1000o C). Antioxidant is the main feature. Like alloy C276, Inconel 625 is a nickel-chromium-molybdenum alloy. Adding niobium results in a stronger material. Common applications are marine environment and pollution control equipment.

The Inconel 625 is highly resistant against corrosion and oxidations mediums in various environments.

Roller hearths and radiant tubes, in carbon nitriding processes especially.