1-28 i8n. pipe fittings tee carbon steel tee

Chemical and product analysis should be performed and should meet the required chemical composition of carbon, manganese, phosphorus, sulfur, silicon, chromium, molybdenum and titanium.

According to ASME Boiler and Pressure Vessel Code, ASTM A420 WPL6 is not permitted for use in the construction of power boiler.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

We manufacture ASTM A403 WP 304 elbows, which are corrosion resistant and help prevent internal fluid contamination. Various industries trust this standard because it describes safety and quality.

Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers higher creep, stress to rupture and tensile strength at elevated temperatures.

The UNS S32750 standard of Pipe Fittings consists of 25% chromium, 4% molybdenum, and 7% nickel. The UNS S32750 Pipe Fittings have a 50-50 microstructure of ferritic and austenitic steel grades with improved strength.

We offer tees like ANSI B16.9 alloy UNS N08020 with good machinability and can be painted with different finishes to enhance their surface quality as required. ASTM B366 Alloy DIN 2.4660 Welded Fittings Eliminate Corrosion in Chemical, Shipbuilding, Food and Beverages. We are also an exporter of ASTM SB366 Alloy 20 Seamless Pipe Fittings for non-corrosive use in oil rigs.

HASTELLOY C-276 alloy (UNS N10276) was the first wrought, nickel-chromiummolybdenum material to alleviate concerns over welding (by virtue of extremely low carbon
and silicon contents).

Hastelloy Alloy C276 Pipe Fittings, which are used as matching composition filler material for welding alloy, wrought and cast products. For optimum corrosion performance in Hastelloy C276 Butt Weld Fittings, therefore, the re-annealing of cold worked parts is important. To obtain a reducing media in Hastelloy C276 Elbow Pipe Fittings, add 2 % (by volume) of either ethyl or propyl alcohol to water. During machining, Hastelloy C276 Tee Pipe Fittings work harden rapidly, generate high heat during cutting, weld to the cutting tool surface and offer high resistance to metal removal because of their high shear strengths. Hastelloy C276 Cross Pipe Fittings is used for Flue gas desulfurization system, Aramide plastics production, and Pickling baths. Hastelloy C276 Reducer Pipe Fittings is commonly used in Flue Gas Desulfurization (FGD) applications for scrubbers, dampers and ducts.

HT PIPE according to the customers requirements, devoted itself to manfacturing the kind of fitting materials which can resistant to corrosion, wearing, welding and combination and have high intensity. In each manufacturing process has strict control error, and pipe connectors have a variety of surface treatment methods, and uniform shell thickness.

However Xusheng is not satisfied with current situations,still devoting itself to researching and developing the new products,Move towards more advanced leading posiition, Take advantage of product technical and product developing abiliity to greet the new challenge,and finally to satisfied the 21th century health need.

HT Pipe is the well-acknowledged manufacturer and exporter of the high quality of Super Duplex Steel UNS S32750 Pipe Fittings. These are found utilized into outlet gas desulfurization systems. SD UNS S32750 butt-weld fittings are used in the applications that are food industry related such as vegetables, corn processing, etc.

Stainless Steel UNS N08904 Seamless Pipe Fittings, ASTM B366 904L Stainless Steel 90 degree Elbow Exporters, 904L Stainless Steel Reducer, Stainless Steel 10d Pipe Bend, SS 904L Short Radius Elbow Supplier.

The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.

This concentric reducer has a high conductance tapered profile that reduces tube size. Butt weld joints are fabricated from welded, drawn and annealed 304 stainless steel tubing for applications where the number of sealed joints needs to be minimized.

Grade 2205 is the most widely used duplex stainless steel grade. Fittings of this grade finds applications due to both their excellent corrosion resistance as well as their high strength.

One of the major concerns about the SS 304 Fitting is its low cost compared to other high end alloy material counterparts.All A403 gr WP304 Buttweld Elbow and 304 Pipe Fittings should experience heat-treatment.

Stainless steel sanitary fittings are the main components of sanitary process systems. As one of the sanitary solution providers, HT PIPE manufactures and supplies a wide range of sanitary fittings including DIN/SMS/3A/IDF/RTJ/ISO/BS welded fittings, unions, tri-clamps, ferrules, pinch fittings and short tube etc. We have the ability to provide qualified sanitary fittings that meet your high purity conditions and FDA, GMP requirements.

Duplex steels are stainless steels, also known as duplex steels due to the presence of two phases in their metallurgical structure. This duplex steel is designed to provide better corrosion resistance and higher strength than other aesthetic stainless steels.

ASTM A403 WP304L covers the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.

They are generally used to attach (or join) two or more pipes (or tubes) together using pipe fittings. They help to make the joint stronger by adding additional strength to the joint, thereby helping to maintain the position of joint with increased stability. Pipe Fittings helps to change the direction of pipe/tube and ensures smooth flow of the content within. Pipe Fittings are also known as Buttweld Fittings.

Carbon steel pipes are known for their ability to withstand high temperatures and are ideal for steam pipes. However, if you are trying to work in extreme climatic conditions (for example, transporting cryogenic liquids), you must use a different grade of pipe.

We manufacture Stainless steel 304/ 304L pipe fittings for end-users such as marine engineering, chemical processing, hydro-carbon processing, heat exchangers, valves and pumps. and ship worldwide.

These fittings don¡¯t deform or dissociate easily at high pressures and elevated temperatures. The Alloy 600 Fittings possess superior strength and excellent mechanical properties. They possess a minimum tensile strength of 655Mpa and a minimum yield strength of 310 Mpa.

Incoloy 800H Pipe Fittings (UNS N08810) is in fact an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength.

It is applicable in various applications like car headers, machinery parts, screws and also food handling equipment. Hot / Cold / Fabricate / Seamless / Welded / Induction

Being a two ¨C phase material (austenitic ¨C ferritic) stainless Steel BW Pipe Fittings will present a different tool wear profile from that of single ¨C phase steels of type 304L.

C-22 is a great alternative when superaustenitic stainless steels (AL-6XN, 904L, and 254 SMO) and duplex stainless steels (2205 and 2507) will not withstand extremely aggressive media. This is because it is a nickel-chromium-molybdenum-tungsten alloy with better overall resistance to uniform and localized corrosion than any other Ni-Cr-Mo alloy, like Hastelloy C-276, C-4, and alloy 625.

Long elbows as sanitary fittings are used in low-pressure gravity-fed systems and other applications where low turbulence and minimum deposition of entrained solids are of concern.

ASTM A403 WP317 Pipe Fittings could be a altered adaptation of Stainless Steel 317L Pipe Fittings. It has high quality and erosion resistance.

Among many applications, products include instrumentation components for the mechanical, chemical, petroleum, watchmaking, food and beverage, and medical industries.

316L can be used in large diameter annealed condition or small cross section cold worked condition.