1-2 inch nickel alloy steel pipe fitting cap

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

The B2 forged fitting is the cornerstone of a strong comic, and the composition of Hastelloy leverages it to have the necessary strength and quality standards to help it withstand a lot of stress for years to come.

Stainless steel 304 is a type of stainless steel that is resistant to corrosion and rusting. Stainless Steel 304 Forged Fittings are used for connecting two pipes or tubes together and can be made from a variety of metals, including copper, brass, aluminum, or stainless steel.

The products offered are appreciated in the market due to the best performance and good quality of the products. These nickel alloy 200 outlet fittings are used in pharmaceutical plants, industrial machinery, chemical plants, oil refineries, textile machinery, sugar plants, fertilizer plants, power and cement industries, petrochemical plants, etc. We also offer 200 custom nickel Olets fitting sizes.

Inconel 718 is a nickel-based precipitation hardening alloy designed for very high yield strength, tensile strength and creep rupture properties at temperatures up to 1300ºF (705ºC). This alloy has excellent solderability.

A105 Forged Steel Fittings can be ordered to meet the customer requirements by getting them customised according to the instructed dimension . The ASTM A105 Fittings Dimensions are also available as per industry standards such as MSS, ASME and API specification. The A105 Forged Fittings specification are has a limit of up to 10,000 lbs.

Outlet fittings are forged products with high strength and clear cost advantages over conventional pipe branching techniques.

Like the other socket pipe fittings, it has a ladder shaped area, so to insert the pipe into the tee branches then welding together. It usually used for small diameter tubing systems.

These ASTM A182 alloy steel F5 F9 F11 F12 F22 F91 pipe fittings are corrosion resistant. ASTM A182 alloy steel F5 F9 F11 F12 F22 F91 fittings also have high dimensional accuracy.

The solution annealing treatment is required prior age hardening / precipitation hardening. The single phase microstructure created during solution annealing is required prior to age hardening, such that only the precipitates formed during age hardening will be present in the final product. The composition, size, and quantities of those precipitates formed during aging will determine the final product’s hardness, strength, and mechanical properties after aging. It is critical that the structure be properly solution treated prior to aging in order to meet all of these requirements.

Some of them are flange and forge fittings. They are for smaller diameter piping. This carbon steel material grade ASTM A105 is the best fit in pressure systems that need service at high temperatures.

Tee for pipe fittings, pipe connectors. Also called pipe fittings tee or tee fittings, tee joints, used in the main pipe to branch pipe.

Nickel alloy pipe fittings are composed of alloys with nickel as the main element. There is complete solid solubility between nickel and copper. Its wide resolution range between iron, chromium and nickel enables many alloy combinations.

NAS625 (NCF625, UNS N06625) is a nickel-chromium-molybdenum alloy with an additional of niobium. Matrix stiffening provided by molybdenum and niobium results in high strength. The alloy resists a wide range of severe corrosion environments. It also offers resistance to high temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.

Usually, these applications are pressure systems, and it is seen in many instances, the ASTM A105 Threaded Fittings add value to said application.

These are available in different types and grades such as Monel 400 Forged Threaded Elbow, Nickel 200 Forged Threaded Equal and Unequal Tee, Inconel 600 Threaded Equal and Unequal Cross, Incolloy 800 Threaded Half and Full Threaded Fittings, UNS S4400 Threaded Reducers, UNS S2201 threaded caps, Hastelloy C276 threaded reducing inserts, etc.

Typical applications for copper-nickel 70/30 forged fittings are condensers, seawater piping, power plants, exchanger housings, etc. These cupronickel 70/30 fittings can be further customized in thickness and size according to customer specific requirements.

Cu-Ni forged threaded fittings are usually supplied as redrawn tubes in the annealed condition. The combination of good ductility and strength provides excellent formability. In addition to this, these forged fittings are also resistant to rust, oxidation, pitting, stress cracking and crack stress.

A tee has three openings, namely an inlet and two outlets; A chemical pipe fitting with two inlets and one outlet, either T-shaped or Y-shaped

ASTM A105, also known as carbon steel, is an iron-carbon alloy with an internal carbon content of nearly 2 percent.

Cooling units in many desalination plants and power plants use seawater to keep equipment cool, but salt water is a problem and can cause corrosion in pipes. This can be solved using ASTM B171 Copper Nickel Forged Fittings which are environmentally friendly and easy to assemble without any threaded or bolted connections and no corrosion in the pipe.

It is ideal for food processing, chemical processing, and fluid transportation. The most common uses for stainless steel forged fittings are in food and fluid processing, as well as chemical applications. Stainless Steel 304 is the best choice for forged fittings because of its inherent properties.

A Pipe Nipple is a short piece of pipe generally provided with male threads at each end for connecting to other fittings.

This type of metal is able to withstand high temperatures, which makes it a good choice for industrial applications. It is also strong, durable, and rust-proof. Aside from being corrosion-resistant, stainless steel 304 has a high level of ductility and weldability.

Carbon steel material is used for forging. This material can be in shape of a bar or in shape of the ingot to meet various forging requirement. They offer maximum machinability and weldability.

Stainless steel tee is a common butt welded pipe fitting and an important part of the piping system. According to the diameter of the outlet, there are two types of pipe fittings: equal diameter tee and reducing tee. Equal diameter tee, also known as straight tee, has the same outer diameter of the three water outlets.

The alloy is also resistant to ammonia-containing atmospheres as well as nitrogen and carburizing gases.

A socket weld is a pipe connection detail in which the pipe is inserted into a recessed area of a valve, fitting or flange. It is mainly used for small pipe diameters and is generally used for pipes with a nominal diameter of NPS 2 or less.

Our range of Nickel Alloy Fittings, Nickel Alloy Fasteners, High Strength Fasteners includes Butt Weld Fittings, Socket Weld Fittings, Threaded Fittings, Flanges, Fasteners, Outlets, Pipes and Bars. The company successfully engages in supplying industrial accessories and hardware products in a variety of sizes, shapes and sizes to meet customer requirements.

Alloy 400 is virtually immune to chloride stress corrosion cracking in typical environments. Generally, its corrosion resistance is good in reducing environment, but poor in oxidizing environment.

Due to its high strength and stiffness properties, Inconel 800 is an alloy that is ideal for demanding applications including the marine engineering, aerospace, and chemical processing industries.