1-2 stainless pipe fitting union factory supply

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Hastelloy C276 bushings have excellent resistance to strong oxidizing salt solutions such as ferric chloride and cupric chloride. Alloy C-276 has excellent phosphoric acid resistance at all temperatures below boiling point and concentrations below 65%.

Stainless steel tee fittings are tee fittings. It has two 90¡ã angled outlets and one inlet. These fittings may have threads on the ends. These accessories are used in several industries such as oil refining, water treatment and other treatment units. Tee fittings are available in different sizes and shapes, including straight tees, equal tees, reducing tees, Y tees, transverse tees, male and female branch tees, and male and female tees.

A bushing is a type of bearing. Generally speaking, “bearings” facilitate movement between two components while reducing friction. Simple in design, a typical bearing has two surfaces that roll against each other, allowing the two mating parts to move without friction.

A steel nipple fitting is a straight length of pipe with external threads on both ends. It is one of the most popular categories of pipe fittings. It is a connector or coupling with threads on both ends. Fittings are used to connect pipes to water heaters or other pipes.

A105 forged fittings are continually working harder in order to improvise the quality of the product as well as offered services.

Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee (Tee reducer), both are used to divide (combine) the pipelines to adjust the flow rate and change the direction.

For instance, the use of Carbon Steel ASTM A105 Fittings is prominent in those applications that involved not only environments where the temperatures are high, but also in those applications at room temperature.

We are exporters and suppliers of Inconel DIN No. 2.4856 Pipe Tees that are heavy-duty, leak-free and corrosion proof. Also We offer wide range of Inconel ASTM B366 600 Pipe Fittings such as Inconel 600 Tee, Alloy 601 End Pipe Cap, Inconel 625 reducer, Inconel Alloy 718 cross, Inconel 600 elbow, Inconel 625 stub ends etc.

Steel pipe fittings are made of carbon or alloy steel pipes, sheets, profiles, and have a shape that allows them to function (change the direction or rate of fluid) in a piping system. These accessories mainly include steel elbows (45 or 90 degree bends), tees, reducers (concentric or eccentric reducers), crosses, caps, pipe joints, flanges, gaskets, studs, etc.

You source everything directly from manufacturers and shareholders! The average daily sales volume of stainless steel pipes in our inventory is about 40 tons. We believe in offering our clients substantial discounts and work closely with them on all their project requirements. We always offer the most competitive stainless steel 90 degree elbow prices to potential and existing customers.

Alloy 625 (UNS N06625) is available in Round Bar, Flat Bar, Extruded section, Pipe, Tube, Plate, Sheet, Strip, Plate, Hexagon, Forging Stock, Extruded Section, Wire and Powder.

If hardened Monel 400 is the goal, cold working with a soft tooling material is the only option. By cold working, mechanical stress is used instead of heat to change the shape of the metal.

We are the largest shareholder of forged threaded bushings in custom sizes to customer requirements. We specialize in producing threaded bushing sizes to ASME B16.11. Threaded hex bushing sizes to B16.11 cover pressure-temperature ratings, dimensions, markings, tolerances and material requirements.

This nickel alloy has good corrosion resistance, good wear resistance and high strength.

Steel pipe elbows are important components in plumbing piping systems for changing the direction of fluid.

Stainless Steel Forged Screwed-Threaded Union Suppliers, ASME B16.5/ B16.9/ B16.11/ B16.36/ B16.25/ B16.49 Stainless Fittings, ASTM A182 Forged Screwed-Threaded Union, threaded pipe fittings & socket weld pipe fittings manufacturers

Threadolet is a type of self-reinforced branch fitting developed by a Company called Bonney Forge. It is used whenever threaded branch connections are required from the pipe header. Mostly, it is used for small size piping with a low-pressure application.

Forged fittings are used to join, branch, blind or route small diameter piping systems (usually less than 2 inches).

ASTM A182 Alloy Steel Pipe Fittings are very easy to install and have a low hub due to the pipe going into the fitting before welding.

SS 304 Forged Fittings are used in various applications that require joining two heavy-duty metal parts. Stainless Steel 304 Forged Socket Fittings can be used in shipbuilding, fats and fertilizers, and the chemical industries.

Steel pipe elbow plays a key role in the pipe fittings, which frequently used in different application and available in various shapes and sizes. It connects two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree, 90 degree or 180 degree.

Since only one type of carbon steel forging is specified in this standard, a105 is considered a type of forging carbon steel grade.

A stainless steel 304 short radius elbow has a radius that is longer than the outside diameter of the pipe it is installed on. These accessories fall under ASTM A403 specification. Their nominal diameters range from 1/8″ to 48″. The standards for these dimensions are ASME B16.9 and B16.28. 304 stainless steel 90 degree elbows are commonly used elbows.

Forging is one of the oldest methods used to form metal parts, improving their mechanical properties such as fatigue, impact resistance and corrosion.

Inconel 800 forms a thick yet stable oxide layer. This thick layer is known to protect the outer surface of the Inconel 800 component from further attack.

Our range of Nickel Alloy Fittings, Nickel Alloy Fasteners, High Strength Fasteners includes Butt Weld Fittings, Socket Weld Fittings, Threaded Fittings, Flanges, Fasteners, Outlets, Pipes and Bars. The company successfully engages in supplying industrial accessories and hardware products in a variety of sizes, shapes and sizes to meet customer requirements.

Grade F22 is a low alloy steel containing nominally 2.25% Chromium. The alloy is widely used in the oil patch wellhead applications for connectors, hangers and block valves. Hardness levels up to 22 HRC are approved to NACE MR0175. The grade is often used as the base metal for clad components.
If supplied to ASTM A182 in the normalised and tempered condition, the 0.2% Proof Stress minimum is 30 KSI.Grade 22 of the ASTM A182 alloy steel is a low-alloy steel that contains 2.25% chromium. Often used as base metal for clad components, the F22 is also used in the oil patch wellhead applications for products such as hangers, connectors, and block valves, among others.

Just as the corrosion resistance characteristics of carbon steel could be improved by further processing, it is possible to increase the mechanical properties of the ASTM A105 Fittings with the use of heat treatments.

Stainless steel does not rust because Cr and Fe in it are oxidized to form a dense passive film to prevent further corrosion.
AISI 304 stainless steel has excellent corrosion resistance in mild atmosphere and fresh water, and even the surface will not rust. But it is not resistant to halide (such as chloride, fluoride, etc.) corrosion, because halide easily penetrates the passive film, making stainless steel lose its resistance.

At elevated temperatures, the annealed and solution annealed alloys exhibit good oxidation resistance and high strength.