1-24 4 inch 8 inch female 317L ELBOWS stainless steel pipe fitting

It is exported near and at a distance, which speaks to the technical complexity of our products. It is known for its durable properties, rust resistance, longer life and more. Inconel WNR 2.4668 fittings are used in heat exchangers, pressure vessels, piping, valves, flanges and fittings, condensers, etc.

Nickel alloys pipe fittings are metals made from combining nickel as the primary element with another material. It merges two materials to deliver more desirable features, such as higher strength or corrosion-resistance. Because of its unique properties, it’s used in a variety of equipment spanning multiple industries.

Street elbows can also be used in tight spaces where conventional elbows cannot be easily installed. These elbows are available with a 90-degree bend angle, but are also available in 45 and 22.5 degrees. These Alloy 800 fittings are commonly used in sewers, drains, vents, gas pipes and more.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ss 304L seamless pipe fittings are ideal for installation in pipes subject to high pressure, corrosion and vibration conditions. It is suitable for pressurized and non-pressurized applications; it is available in a variety of construction materials, depending on the nature of the medium to be transported.

UNS N02200 nickel alloy pipe fittings are manufactured from high grade, commercially pure (99.6%) wrought nickel. Nickel 200 fittings are ideal for a wide range of industries including chemical equipment, gas processing, heat exchangers, pharmaceuticals, power generation, and more.

UNS S32205 Forged Socket Welded 90 Degree Elbow Fittings in-depth various programs with Oil & Gas, Refinery, Petrochemical, Chemical, Fertilizer, Power, Structural & Mechanical, Automotive, Bearing Programs.

Alloy 800 is an iron-nickel-chromium alloy with moderate strength and good resistance to oxidation and carburization at elevated temperatures.

The UNS S32750 standard of Pipe Fittings consists of 25% chromium, 4% molybdenum, and 7% nickel. The UNS S32750 Pipe Fittings have a 50-50 microstructure of ferritic and austenitic steel grades with improved strength.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.
Teel Industry has grown in the past few decades and there are a variety of products available in the market. ASTM A815 UNS S32750 Pipe Fittings are one of those products and are available in various sizes, shapes, and dimensions. ASTM A815 UNS S32760 Pipe Fittings are designed to be resistant to corrosion and are said to have perfect weldability. These Super Duplex S32750 Buttweld Fittings are resistant to erosion corrosion and fatigue. They have a mixed microstructure of 50% austenitic and 50% ferrite.

Duplex fittings are used in different types of piping applications. 2205 is a standard duplex steel with 21% chromium. The material is strong, twice as strong as austenitic steel types. Different standards such as ASME B16.9, B16.28 and B16.25 govern the dimensions. Depending on the type of fitting, the nominal bore diameter of the fitting can also vary.

304L stainless steel construction. It is composed of chromium-nickel material and has very good corrosion resistance. Couplings are suitable for unthreaded pipes in air, water, oil and gas applications.

304 SS Weld Fittings & Stainless Steel 304 Pipe Fittings must contain more than 18% chromium and more than 8% nickel. ASTM A403 WP304 Fittings are buttweld fittings made for austenitic stainless steel applications with forged material.

ASTM A234 WP22 Pipe Fittings are made up of the specification that has carbon, manganese, silicon, sulfur, phosphorous, chromium and molybdenum in its composition. The molybdenum content is 0.9-1.1% of the composition which makes this grade specific. This grade has a tensile strength of 380MPa minimum and a yield strength of 585MPa minimum.

Our offered SS 904L Buttweld Elbow contains a low carbon austenitic nickel-chromium stainless steel with additions of molybdenum and copper.The Stainless Steel 904L Pipe Fittings are mainly used in the chemical industries, utility scrubber assemblies, etc.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Duplex Steel S31803 Reducer Fittings are resistant to chloride environments and sulfide stress corrosion. Our WNR 1.4462 Duplex Steel S31803 Pipe Couplings withstand sulphur-induced stress corrosion cracking, accommodate high steam pressures and provide extended service life, economical and reliable.

we manufacture wide range of ASTM A234 Grade WPB Seamless Fittings such as ASTM/ASME A234 Wpb Reducer & A234 Gr WPB Fittings, ASTM A234 Gr WPB Elbow etc.

For equal tee/straight tee, the center-to-end dimension of branch is same with the run, while for reducing tee, the center-to-end dimension of branch is smaller than the run to obtain the desired flow and pressure through the piping system.

Monel alloy K-500 pipe bend and elbow have been found to be resistant to a sour-gas environment. After 6 days of continuous immersion in saturated (3500ppm) hydrogen sulfide solutions at acidic and basic pH’s (ranging from 1.0 to 11.0), U-bend specimens of age-hardened sheet show no cracking.

Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners.

Inconel 600 Pipe Fittings is used and applied by several industries. It is involved in process equipment such as fluorinated and chlorinated hydrocarbon productions. Manufacturers of a heat exchanger and reactor vessels like using this type of alloy, especially in the construction of vinyl chloride and other substances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The SA234 Grade WPB Tee is a fitting used to connect three pipes together at one point.Hot formed or forged WPB, WPC, WPR fittins made at above 980¡æ[1800¨H] shall be annealed, normalized, or normalized and tempered. NPS4 hot forged fittings no need to be heat treated.

Alloy X pipe bend is known for its excellent high temperature strength withstanding up to 2200¡ãF. The alloy can also be easily fabricated with forming and welding characteristics by both manual and automatic methods.

ASTM A860 WPHY 60 Fittings are wrought carbon steel fittings that are either seamless or welded with high yield strength. The WPHY 60 indicates that the minimum yield strength of the ASTM A860 WPHY 60 Fittings is 60ksi.

Forged fittings produced in a facility covered by the ASME B16.9 standard must be manufactured in accordance with ASTM A 403. Molybdenum bearing stainless steel 316L fittings are also known as marine grade due to their excellent resistance in marine environments. While the chemical composition of grade 316L is similar to that of grade 316 stainless steel, the main difference between the two alloys is the nitrogen and carbon content.

Type 304 is the most popular stainless steel and is a natural choice for its corrosion resistance. It resists rusting in many different environments, but is primarily attacked by chlorides.

Titanium rapidly starts to react with oxygen molecules at around 1,200 ?C, and it can exhibit the same behavior at a reduced temperature of 610 ?C when the oxygen is in pure form.

Monel K500 alloy has the same corrosion resistance as Monel 400 alloy.