1-24 and 1 inch female 317L elbows stainless steel pipe fitting x22230

Monel K500 pipe bend and elbow are exceptionally good dimensional stability.

The machinability of 316 pipe bend is about 60% that of AISI B1112 resulphurised free cutting carbon steel. A free machining version of 316 is available as bar.

Alloy B2 pipe bend provides resistance to pure sulfuric acid and a number of non-oxidizing acids.

Pipe bending methods will vary based upon the metals used.

Designated as UNS N08825 or DIN W.Nr. 2.4858, Incoloy 825 (also known as “Alloy 825”) is an iron-nickel-chromium alloy with additions of molybdenum, copper and titanium. The addition of molybdenum improves its resistance to pitting in water corrosion applications, while the copper content gives it resistance to sulfuric acid. Titanium is added for stability. Alloy 825 has excellent resistance to localized corrosion such as reducing and oxidizing acids, stress corrosion cracking, and pitting and crevice corrosion. It is particularly resistant to sulfuric and phosphoric acid. Incoloy 825 alloy is mainly used in chemical processing, petrochemical pipelines, pollution control equipment, oil and gas well pipelines, nuclear fuel reprocessing, acid production and pickling equipment.

ASTM A234 WPB Elbow is one of the most used forms of pipe fittings. An elbow is a connector shaped like an elbow and allows for directional transformation in fluid flow.

This is a nickel-copper, solid-solution alloy that is hardenable only by cold working. It has high strength and toughness over a wide temperature range and is resistant to many corrosive environments.

Monel 400? has low corrosion rate in flowing seawater, therefore it is widely used in marine applications.We make use of the best manufacturing techniques for their production so that the final product being served to the customers is the best of best.

The Carbon Steel A234 WPB Smls Reducer is a seamless product that reduces the diameter of the pipeline.Unless specified for carbon steel plates or sheet, the steel may be made to either coarse grain or fine grain practice. Which ASTM A234 WP9 shall be made to fine grain practice.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

Butt welded pipe fittings provide the user with a means of manipulating the piping system. For example, elbow stainless steel pipe fittings can be produced at customizable angles if the system needs to change the flow direction.

Long elbows as sanitary fittings are used in low-pressure gravity-fed systems and other applications where low turbulence and minimum deposition of entrained solids are of concern.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASME SA 403 WP 304 Reducer is a butt welded fitting that reduces pipe diameter at the joint. Stainless steel 304 long radius elbows are another type of elbows with a radius more than twice the diameter of the pipe.

ASTM A403 WP304 pipe fittings mean the pipe fittings which material is Wrought Austenitic Stainless grade A403 WP304,they are used for the pressure piping systems of moderate and high temperature services.ASTM A403 is the standard of pipe fittings material,it indicates the materials properties of different kinds of stainless steel,WP304 is one of the steel grade in this standard

Alloy 410, is the essential, general purpose martensite stainless steel that¡¯s used for very stressed elements and provides sensible corrosion resistance, and a high strength and hardness. Alloy 410, contains a minimum of 11 .5% metal that¡¯s simply adequate to demonstrate corrosion resistance properties in delicate atmospheres, steam, and much of delicate chemical environments.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with excellent corrosion resistance in a wide range of marine and chemical environments and has freedom from chloride induced stress-corrosion cracking.

904L (N08904, 14539) super austenitic stainless steel contains 14.0-18.0% chromium, 24.0-26.0% nickel, 4.5% molybdenum. 904L super austenitic stainless steel is a low-carbon, high-nickel, molybdenum austenitic stainless acid-resistant steel, which is a proprietary material imported from French H¡¤S Company. It has good activation-passivation transformation ability, excellent corrosion resistance, good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid, phosphoric acid, and good corrosion resistance in neutral chloride-containing media Excellent pitting corrosion resistance, as well as good crevice corrosion resistance and stress corrosion resistance. It is suitable for various concentrations of sulfuric acid below 70 ¡ãC, and has good corrosion resistance in acetic acid of any concentration and temperature under normal pressure, as well as in the mixed acid of formic acid and acetic acid.

We are a well-known distributor and manufacturer of 317L Stainless Steel Disc Cover Fittings, widely known for their corrosion resistance properties. It is often considered for its compact size, high energy, durability, etc. Commonly used in chemical, cement, paper, oil and gas, petrochemical and other industries. They are made from high quality raw cloth and are noted for their close tolerances and dimensional accuracy.

ASTM A815 GR S32750 tee is used to merge or split fluid streams.

It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. SS 316 also has outstanding welding characteristics.

Stainless steel 310 reducers are a mixture of several metals (this is called an alloy), but mostly iron, which is harder and stronger than iron. Stainless Steel 310S Cross Butt Weld Fittings are typically ferrous alloys with a carbon content between 0.02% and 1.7% by weight. Stainless steel 310 bend butt welded pipe fittings with carbon content above this value are called cast iron, in which the carbon is replaced by other alloy materials.

The pitting resistance of ASME B16.9 SS 316L fittings is much higher compared to Grade 316. While Alloy 316L can be easily welded by most commonly used processes, Werkstoff Nr. is post weld heat treated.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

These fittings are used as matching composition filler materials for welded alloys, forged and cast products. Therefore, re-annealing of cold-worked parts is important for optimum corrosion resistance in Hastelloy C276 butt-welded pipe fittings. To obtain reducing medium in Hastelloy C276 elbow fittings, add 2% (by volume) ethanol or propanol to water.

Corrosion resistance of duplex steel radius fittings provided. Comparable to standard austenitic grades or high alloyed ferrites. While duplex steels have good high temperature oxidation resistance like other duplex stainless steels, embrittlement can occur even at temperatures above 300 degrees Celsius for short periods of time. In case of embrittlement, duplex steel stub joints can only be corrected by a complete solution annealing treatment.

Stainless Steel A403 WPS31254 contains higher chromium and low carbon content. Lower carbon means less chromium carbide precipitation due to welding. This steel type contains as low as 0.03% of carbon content and thus reduces its susceptibility to intergranular corrosion. This kind of steel can be continuously exposed to temperatures of about 1500 without appreciable scaling.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).