1-24 female and female pipe fittings duplex elbows

ASTM A403 WP310/310S is an austenitic heat resistant alloy having high resistance to oxidation under mildly cyclic conditions through 2000oF.

This steel has a high nickel and chromium content that offers comparable corrosion resistance, high resistance to oxidation and retention of larger fraction of room temperature strength than the common austenitic alloys like Type 304.

Stainless 310 is often used at cryogenic temperatures, with excellent toughness to -450¡ãF, and low magnetic permeability

304 and 304L are austenitic alloys, which means that a nonmagnetic solid solution of ferric carbide or carbon in iron is used in giving this stainless steel its corrosion-resistant properties.

A stainless steel butt weld cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.
A Stainless Steel Butt Weld Cap is used to seal the end of a pipe or a particular butt weld fitting branch or orifice. Typically butt weld pipe caps are used at the end of a piping system or if maintenance is required the pipe cap can blind or isolate the rest of the system to keep it running while maintenance or repairs are performed.

We have a massive stock of Super Duplex WPS 32750 Tee, known for its high ductility, and its excellent corrosion resistive nature makes it an excellent option for marine applications.

The molybdenum gives SS 316 better overall corrosion resistant properties than Stainless Steel 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Stainless Steel 316 has excellent forming and welding characteristics.

Duplex steel pipe fittings are the profession of repairing or installing pipes or piping systems that carry liquids, gases and occasionally solid materials. It is a ferritic-austenitic microstructure with a phase balance of approximately 50% ferrite and 50% austenite.

321 Fittings cover the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material of pipe fittings shall include forgings, bars, plates or seamless or welded pipes. Forging or forming operations shall be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or a combination of two or more of these operations. All accessories should be heat treated.

Incoloy is a group of superalloys with good electrical resistance and tolerances. Incoloy 800 is an alloy of iron, nickel and chromium. These alloys are extremely resistant to corrosion and oxidation. They are not easily deformed or broken down under extreme pressure and heat. The alloy has medium strength and Incoloy 800 material has excellent mechanical properties.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
A stainless steel pipe system is the product of choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. As a result of the aesthetic properties of stainless steel, pipe is often use in architectural applications.

Stainless steel pipe fittings consist of 10% nickel and high chromium content. Manufacturers of stainless steel fittings produce these fittings with the addition of manganese, phosphorus, carbon, silicon and sulfur in addition to the two main elements.

The standards are ASME B16.9 and B16.28 and the schedules range from sch5s to XXS.

we are traders of we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

ASTM A403 WP304H pipe fittings mean the pipe fittings which material is wrought austenitic stainless and grade is ASTM A403 WP304H.The material is additionally utilized all through the control era industry.

SD UNS S32750 reducer is having very good yield potency and ductility as compared to the other austenitic metals and thus fabrication will find an augmented radius of meandering, higher materializing force and greater allowances for the spring back.

Our Stainless Steel 904L Buttweld Fittings (WNR 1.4539) are used in Power plants using fossil or nuclear fuels, and also in geothermal energy for harnessing heat from the earth. SS 904L Welded Tube Fittings are used for the cold chain to keep produce fresh, drinks, and frozen foods at a set temperature. SS WERKSTOFF NR. 1.4539 Buttweld Pipe Fittings are used in industries such as Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry.

Alloy 800HT / Incoloy 800HT is a controlled composition derivative of INCOLOY alloy 800H (UNS N08810) and is used for the same creep resistant applications, however the combined effects of mechanical and thermal processing of the alloy permit higher design stresses to be incorporated than are permitted for the conventional alloy.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Titanium resides in group 4 (IVB) of the periodic table, which means it is in the middle.

Also known as 3 way pipe fittings, tee fittings resemble the alphabet ¡®T¡¯, where in two horizontal pipes and one vertical pipe can be attached, to manage the direction and mixture of fluids. Pipe tees are widely used in piping systems to transport two phase fluid mixtures and are mainly of two types ¨C Equal Tee and Unequal Tee (Reducing Tee).

Incoloy 800 is an alloy whose primary constitution is made up of nickel, iron, and chromium. This particular alloy, unlike the former, has less than 50% nickel content in its chemical composition. Aside from their chemical makeup, the other points of distinction for both the alloys are their use in a specific set of applications or industries.

C22 has excellent resistance to oxidation, carburization, and sulfidation at elevated temperatures. However, C22 should not be used at temperatures above 1250¡ãF due to the possible formation of embrittling phases.

Monelk500, also known as UNS N05500, has the same corrosion resistance as monel400, but has higher mechanical strength and hardness. It has good corrosion resistance and long-term organizational stability.

After hot working, anneal the tube by heat to 1725 and 1850 for at least half an hour to match the inch thickness observed by water quench. Intergranular corrosion (IGC) in pipe fittings, also known as intergranular corrosion (IGA), is a form of corrosion in which the crystallite boundaries of fabrics are particularly susceptible to corrosion. UNS S30403 fittings can be properly hot formed with forces very similar to those required to pass through austenitic steels.

It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. SS 316 also has outstanding welding characteristics.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Hastelloy C276 Fittings is used in high temperature and high corrosion prone applications. The material is corrosion resistant and heat resistant because of its unique composition. It is a nickel molybdenum chromium super alloy that is stabilized with tungsten. The Hastelloy C276 Fittings come under the ASTM B366 specification. HT pipe is a leading supplier and manufacturer of these fittings in different types, sizes and threads. There are seamless fittings and buttweld fittings.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.