1-4 and 1 inch stainless steel pipe fitting 347 cap

we are stockholders of we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

S31803 is resistant to stress chloride corrosion cracking, and duplex stainless steel exhibits the best corrosion performance in high temperature and sulfide environments.

Hastelloy B2 pipe bend has excellent resistance to all temperatures and concentrations of hydrochloric acid.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
A stainless steel pipe system is the product of choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. As a result of the aesthetic properties of stainless steel, pipe is often use in architectural applications.

The stainless steel 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Stainless steel butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. 90 degree elbows are available in long radius and short radius.

This superalloy is composed mainly of nickel (58% min.) followed by chromium, and molybdenum, niobium, iron, tantalum, cobalt, and trace amounts of manganese, silicon, aluminium, and titanium.

Stainless steel such as 304 and 316L casting of pipe fittings requires low maintenance and does not need an additional coating, in both indoor and outdoor applications. The expected lifetime of a stainless steel pipe fitting is more than 50 years, reducing system down time, replacement and maintenance costs over the life of the installation.

Designated as UNS N08825 or DIN W.Nr. 2.4858, Incoloy 825 (also known as “Alloy 825”) is an iron-nickel-chromium alloy with additions of molybdenum, copper and titanium. The addition of molybdenum improves its resistance to pitting in water corrosion applications, while the copper content gives it resistance to sulfuric acid. Titanium is added for stability. Alloy 825 has excellent resistance to localized corrosion such as reducing and oxidizing acids, stress corrosion cracking, and pitting and crevice corrosion. It is particularly resistant to sulfuric and phosphoric acid. Incoloy 825 alloy is mainly used in chemical processing, petrochemical pipelines, pollution control equipment, oil and gas well pipelines, nuclear fuel reprocessing, acid production and pickling equipment.

Although 316L contains less carbon, 316 and 316L stainless steels cost approximately the same.

ASTM A234 is a standard specification for steel pipe fittings, including carbon and alloy steel materials for medium and high temperature service. It covers seamless and welded types of steel fittings. Steel pipe fittings are used in the manufacture of pressure pipes and pressure vessels. These fitting materials include killed steel, forgings, bar, sheet, seamless or HFW (fusion welded) pipe products with added filler metals.

Duplex steel UNS S32205 fittings (austenitic and ferritic) are widely used for functions requiring excellent corrosion resistance and efficacy. Duplex steel UNS S31803 butt welded pipe fittings generally have excellent corrosion resistance compared to other austenitic steels.

Hastelloy C22 pipe fittings is a combination of versatile austenitic nickel, chromium, molybdenum, and tungsten alloy. This alloy enhances the resistance to corrosion, petting, and oxidations.

Stainless steel pipe fittings consist of 10% nickel and high chromium content. Manufacturers of stainless steel fittings produce these fittings with the addition of manganese, phosphorus, carbon, silicon and sulfur in addition to the two main elements.

A pipe fitting can be called a pipe tee whenever it is a 3 way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions.

ASTM A403 WP347 covers the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products. Forging or shaping operations shall be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or by a combination of two or more of these operations. All fittings shall undergo heat-treatment.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.

Pipe Tees are a common type of pipeline connection. These are essential components of the pipe sector. The Tee type threaded pipe fittings are utilized when the system needs a single inlet and two outlets or two inlets and one outlet.

Stainless Steel Pipe Bends is used in the textile and printing industry due to its versatility and weldability.

Stainless steel grade 316Ti is a titanium stabilized version of alloy 316. This austenitic chromium-nickel stainless steel grade contains substantial addition of molybdenum which is why the Stainless Steel 316Ti Pipe Fittings exhibits several important characteristics. For instance, grade 316Ti show an increase in the corrosion resistance properties along with improved resistance to pitting chloride ion solutions as well as increased tensile strength at elevated temperatures.

The seamless fitting is made up of seamless pipe and is available in 12 inches. Whereas the welded SS Equal tee is made up of welded pipe and is available in the size range of ? inches to 72 inches. The welded buttweld fittings are economical when compared to the welded ones. The Stainless steel concentric reducer is used to connect pipe sections or tube sections on the same axis and is usually used when there is a shift in diameter.

INCONEL Alloy 600 (UNS N06600 W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat.

Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90¡ã to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

The molybdenum gives SS 316 better overall corrosion resistant properties than Stainless Steel 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

The function and material of sanitary pipe fittings are basically the same as those of industrial stainless steel pipe fittings. However, it is used in the hygiene and food industry, and can be divided into welding type, screw type and clamp type according to the connection method.

Elbow A234 WPB are devided into two categories which define the distance over which they change direction.

Pipe bending methods will vary based upon the metals used.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

316L elbow minimises harmful carbide precipitation due to welding.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.