1-4 in. 14mpw tank weld ferrule (3a) 304 stainless steel sanitary fitting elbows

These fittings are produced from the highest quality raw materials and are well tested and inspected according to national and international standards. Manufacturers offer a full range of pipes and fittings such as UNS S32205 45 degrees. Elbow, Duplex UNS S31803 Reducer, Duplex S31803 Cap, Duplex S31803 Butt Weld Fitting, 2205 Duplex 90 Degree Elbow, Duplex S32205 Butt Weld Fitting, Duplex S32205 Fitting.

MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium.

ASTM A403 WP316L the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with excellent corrosion resistance in a wide range of marine and chemical environments and has freedom from chloride induced stress-corrosion cracking.

It is more resistant to general corrosion and pitting than conventional nickel chromium stainless steels such as 302-304.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A815 UNS S32760 fittings is the one where the strength is excellent and the corrosion resistance is excellent.The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.

Alloy 825 fittings are manufactured like other nickel-based alloys. This means that the material used to manufacture Incoloy 825 elbows is easily formed and welded by a variety of techniques. For example, according to ASTM B366, the list of forging or forming operations includes hammering, piercing, upsetting, rolling, extrusion, pressing, bending, and fusion welding. In addition to withstanding Incoloy 825 fittings for chemical and product analysis, specified fittings also need to meet chemical requirements. Typical applications for Incoloy 825 fittings include their applications in air pollution control, chemical and petrochemical, food processing, petroleum refining, ore processing, steel pickling and waste processing industries, nuclear industry, and offshore oil and gas production.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

Applications in the chemical process industry involving sulfuric, phosphoric, hydrochloric and acetic acid.

Incoloy Alloy 800HT applications have extended from petrochemical processing reformer tubing, to bellows and flare tips in refinery service.

S32205 is a duplex stainless steel with twice the strength of austenitic stainless steel. Duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local stress corrosion resistance. The yield strength of duplex stainless steels is twice that of austenitic stainless steels, a feature that allows designers to reduce weight when designing products, making this alloy more affordable than 316, 317L. This alloy is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some limitations, especially when applied to welded structures. Duplex stainless steel has twice the compressive strength compared to austenitic stainless steel, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range, and can also be used at lower temperatures under severe restrictions (especially for welded structures).

The seamless fitting is made up of seamless pipe and is available in 12 inches. Whereas the welded SS Equal tee is made up of welded pipe and is available in the size range of ? inches to 72 inches. The welded buttweld fittings are economical when compared to the welded ones. The Stainless steel concentric reducer is used to connect pipe sections or tube sections on the same axis and is usually used when there is a shift in diameter.

These fittings are built with non-toxic, corrosion-resistant materials for use in industries that demand ¡°food-grade¡± cleanliness, ensuring zero contamination of the fluid medium.

Stainless Steel 316L is an extra-low carbon version of the grade 316.

Advantages of 304/304L stainless steel pipe fittings, 304/304L flanges Excellent corrosion resistance in a wide range of atmospheric environments, good oxidation resistance in intermittent use at 870¡ãC and continuous use at 925¡ãC, good Resistant to carbide precipitation, good machinability, stainless steel 304H provides higher strength at elevated temperatures and excellent weldability with and without filler metals.

ASTM A234 WP91 is low content alloy steel,so its hardness is higher than carbon steel,so its have better performance for the abrasive resistance and corrosion resistence.So the ASTM A234 WP91 pipe fitting is more widely used for the machine parts compared with carbon steel.

We are Manufacturer, Supplier and Exporter of Stainless Steel 304 Pipe Fittings with some amazing highlights such as strong, strong, flawless, high rigidity, corrosion resistant and this is just the beginning. Buy SS 304 Butt Weld Fittings from us at a reasonable cost. Significant consumption contrast, reduced carbon content, and high quality make 304 stainless steel butt welded pipe fittings amenable to the ability to weld where required.

Stainless Steel 304 Buttweld Fittings are made up of a basic austenitic stainless steel material that has 18% chromium and 8% nickel in its composition.

ASTM B366 pipe fitting is used to connect straight pipe sections, adapt to different sizes or shapes and for other purposes, such as regulating(or measuing) fluid flow. These fittings are maded as per application requirements in different outer diameter and inner diameter with specified surface. HT pipe is a global distributor of nickel alloy pipe fittings in different sizes. Our company is constantly executing regualr as well as customised order for pipe fittings for sectors like oil and gas, engineering, etc.

A reduction in carbon content in any austenitic stainless steel alloy has proven to be detrimental to fittings. To solve this problem, manufacturers add some nitrogen to the alloy of UNS S31603 316L stainless steel fittings, making it mechanically similar to stainless steel alloy 316.

These stainless steel pipe fittings have excellent corrosion resistance and dimensional accuracy along with close tolerances. Our range of pipe fittings include butt weld pipe fitting & instrumentation and ferrule fitting are offered in different sizes, we also provide customization as per the requirements of clients.

We offer tees like ANSI B16.9 alloy UNS N08020 with good machinability and can be painted with different finishes to enhance their surface quality as required. ASTM B366 Alloy DIN 2.4660 Welded Fittings Eliminate Corrosion in Chemical, Shipbuilding, Food and Beverages. We are also an exporter of ASTM SB366 Alloy 20 Seamless Pipe Fittings for non-corrosive use in oil rigs.

A234 WP91 is one of the steel grade in ASTM A234 standard.W means weldable,P means pressure,91 is grade 91.the starting material is ASTM A335 Gr P91 Seamless pipes,widely used for POWER PLANT FABRICATION,Chemical & Fertilizers, Power Generation and Nuclear Industries.

1 – 4 inch short type t, sanitary stainless steel ASTM A403 WPS31254 is an austenitic chromium alloy which is the make-up of the steel is 18 percent chromium and 8 percent nickel. Stainless Steel 304 Pipe Fittings has high ductility, excellent forming, spinning and drawing properties.

Our reducers have high strength and corrosion resistance and are suitable for various industries.

Stainless steel 310 elbow butt welded pipe fittings are also used in most large modern structures such as stadiums and skyscrapers, bridges and airports. Even those with concrete structures are reinforced with stainless steel 310S tee butt welded pipe fittings, and it is also widely used in major appliances and automobiles.

For the seamless steel pipe fittings refers to the fittings raw material from the seamless steel pipes and tubes. Thus the welded steel pipe fittings covers the fittings raw material from welded steel pipes.

Elbow A234 WPB are devided into two categories which define the distance over which they change direction.

A403 316L Stainless Steel covers the standard for wrought austenitic stainless steel fittings for pressure piping applications.Compared to grade 316, the pitting resistance properties of ASME B16.9 SS 316L Fitting is much higher.