1 – 4 inch short elbow sanitary stainless steel 304 weld tee elbow

Duplex stainless steels are Fe-Ni-Cr alloys consisting of ferritic-austenitic microstructure at room temperature. These steels generally possess beneficial combinations of the austenitic and ferritic phases. Duplex stainless steels exhibit greater toughness and better weldability than ferritic stainless steel (Nilsson, 1992). They have higher strength and better corrosion resistance than austenitic stainless steel (Atamert and King, 1992). Their good engineering performance has led to an increasing number of applications, mainly in corrosive environments such as sour gas pipelines and chemical reaction vessels.
Duplex stainless steels combine characteristics of the austenitic and ferritic family of alloys to offer benefits from both with fewer downsides — often at a lower cost than other steel alloys.
Duplex stainless steels have a combination of two phases, ferrite and austenite in approximately equal measure. This allows them to benefit from the advantages of both austenitic and ferritic stainless steels, leading to increased strength, improved weldability, higher toughness and resistance to several types of corrosion.

The material has good strength with 240MPa minimum yield strength and 585MPa minimum tensile strength.

Stainless steel threaded pipe cap is a kind of stainless steel threaded pipe fittings, cast from high-quality 304/316 stainless steel. Threaded pipe caps cover pipe ends, stop fluid flow and protect pipe threads.

ASTM A403 WP347 is a non-heat treatable, austenitic, electric furnace processed grade of stainless steel very similar in composition to Type 321. Type 347 can withstand more severely elevated temperatures than Type 321, as the resulting columbium carbide is more stable and insoluble than the titanium carbide.

Stainless steel ASTM A403 WP316L fittings can be annealed and hardened by a cold working process. Stainless Steel ASTM A403 WP316L Fittings can withstand service containing nitric and phosphoric acids and the resulting oxidation.

We depend on this integral equipment to produce and deliver vital fluids at every stage, from production all the way to consumption. Sanitary elbow fittings are utilized in agricultural irrigation systems, soft drink production, beer brewing and dispensing, various plumbing systems, and more.

Monel 400 Butt Weld Reducers are resistant to aggressive solvents, acids and bases, and seawater, are highly robust at high temperatures, and are also operable for use in many marine engineering applications.

Hastelloy B2 pipe bend is a nickel-molybdenum alloy particularly suited for equipment handling reducing chemical environments.

ASME B366 Incoloy 800 Elbow resists water corrosion at moderate temperatures.

Duplex fittings are used in different types of piping applications. 2205 is a standard duplex steel with 21% chromium. The material is strong, twice as strong as austenitic steel types. Different standards such as ASME B16.9, B16.28 and B16.25 govern the dimensions. Depending on the type of fitting, the nominal bore diameter of the fitting can also vary.

254 SMO is a high-alloy austenitic stainless steel developed for use in seawater and other corrosive chlorine-containing media. The steel has the following characteristics: excellent resistance to pitting and crevice corrosion, high resistance to general corrosion, high resistance to stress corrosion cracking, higher strength than conventional austenitic stainless steels, and good weldability.

SS 317L Elbows are similar to common stainless grade 317 in terms of corrosion resistance, microstructure and primary chromium-nickel-molybdenum chemistry. The high levels of these elements in 317L stainless steel fittings ensure the alloy’s excellent resistance to chloride pitting and general corrosion.

While 300 series stainless steels are very popular, they are not universally suitable for all process piping applications. For example, even though they are corrosion resistant, 300 series formulations do not perform well in the presence of chlorides. In these cases, steels with much higher alloy contents such as molybdenum, chromium and nickel are preferred.

Grade 310 is a medium carbon austenitic stainless steel used in high temperature applications such as furnace components and heat treating equipment. It is used in continuous operation up to 1150¡ãC and intermittent operation at 1035¡ãC. The 310S grade is a low carbon version of the 310 grade. 310 stainless steel has good oxidation resistance and can be used continuously at temperatures up to 1140oC in the absence of reducing sulfur gases. With its high chromium content, 310 stainless steel has good corrosion resistance for improved high temperature performance.

In most cases, fittings can be used in a “welded” condition, where preheating is not required. UNS S30400 grade fittings have excellent resistance to pitting, crevice and general corrosion in compounds containing sulfuric, phosphoric and nitric acids. Although generally regarded as a traditional metal, it is labeled as nickel-based. It is known for making explosives, compounds, gasoline, solvents, and more.

Titanium is a lustrous grey metal with low corrosion rates and high strength; it is used in a variety of applications.

A403 WP304 Pipe Bends can be welded easily however, the material may face localized corrosion due to intergranular corrosion risk.

Alloy X pipe bend offers exceptional performance in furnace rolls or other industrial furnace applications because of the alloy’s strong resistance to oxidizing, reducing and neutral atmospheres.

Carbon steel is a base steel composed of carbon and iron. It may contain other substances in unmeasured quantities or in trace amounts. Carbon steel is classified according to the carbon content mixed with iron. Medium and low carbon steels may have a carbon content of less than 0.3%, while high carbon steels may have carbon content as high as 2%. The percentage difference in content is usually chosen based on solderability. Carbon is known for its ability to withstand high temperatures and strength/stress.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

HT PIPE offers a full range of pipe fittings such as carbon steel reducers, carbon steel elbows, carbon steel tees, carbon steel crosses, carbon steel stub ends and carbon steel elbows. Our carbon steel or mild steel forged flange products include threaded flanges, butt weld flanges, slip flanges, socket weld flanges, blind flanges, lap flanges, plate flanges. We specialize in manufacturing flanges of special sizes and custom shapes for our customers.

HASTELLOY C-276 alloy is available in the form of plates, sheets, strips, billets, bars,
wires, pipes, tubes, and covered electrodes.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

These alloys can function at very high temperatures and in severe mechanical stress environments, and also where high surface stability is required. They have high creep and oxidation resistance.

ASTM A403 WP 316 Elbow covers the standard for wrought austenitic stainless steel fillers. These are used in pressure piping applications. SS 316 45 degree elbows and other 306 pipe fittings shall be performed using a variety of operations such as pressing, piercing, hammering, rolling, bending, upsetting, fusion welding, extrusion, machining, or the combination of two or more of these methods. combination.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The fittings made up of carbon steel are applied through various industrial, commercial and domestic applications.

Copper-nickel (Cu-Ni) piping systems are components that connect copper-nickel pipes, copper-nickel fittings, copper-nickel flanges, and valves that process seawater treatment systems.

Duplex derives a mixed microstructure containing equal amounts of austenite and ferrite. Ferritic alloys provide resistance to stress corrosion cracking, while austenitic alloys provide ease of manufacture and corrosion resistance.