1 – 4 inch short type t, sanitary stainless steel ASTM A403 WPS31254 fittings

The most advantageous feature of welded joints such as A403 is that they provide additional grip and greater strength at the welded joint. This grade has different types of accessories. There are connectors, elbows, unions, elbows and reducers. All these accessories have their own special applications.

Different pipe fittings have different materials. The main difference between carbon steel pipe fittings and stainless steel pipe fittings is steel, and stainless steel belongs to alloy steel.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

A pipe cap, also known as a head, a plug, and a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug. Stainless steel caps are made of stainless steel. HT PIPE is a high quality stainless steel pipe cap supplier, manufacturer, exporter, wholesaler, factory and company in China, mainly exporting high quality 304/316 stainless steel threaded pipe caps.

ASME B16.9 Duplex Stainless Steel Seamless Fittings range from sch5 to sch160 and XXS. Welded fittings with wall thicknesses up to 50 mm. Because the duplex material is strong and resistant to acid and chloride ion corrosion, fittings such as ASTM A815 UNS S32205 Long Radius Elbow are used in seawater, marine and highly corrosive applications such as the oil, oil and gas and offshore oil drilling industries.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Large selection of finished and semi-finished stainless steel caps/end caps, crosses, elbows, reducers, tees, stub ends and many other stainless steel butt weld fittings for use in power plants, oil and gas, water treatment, food processing , petrochemical, LNG industry, automotive, heavy engineering, offshore and chemical. We can supply butt welded pipe fittings individually or in conjunction with our other plumbing products.

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

The standards are ASME B16.9 and B16.28 and the schedules range from sch5s to XXS.

Duplex steel butt welded fittings are weldable fittings that can change flow direction, branch, reduce pipe size, or connect additional equipment. It has high mechanical strength and high resistance to stress corrosion cracking. This is also the result of alloying with nitrogen.

Designed to combine impact toughness against chloride stress corrosion cracking with pitting and crevice corrosion, S31254 stainless steel is twice as strong as stainless steel 300 series.
It is also known for its excellent machinability.

ASTM A403 WP304H pipe fittings mean the pipe fittings which material is wrought austenitic stainless and grade is ASTM A403 WP304H.The material is additionally utilized all through the control era industry.

316 stainless steel pipe bend has very low responsiveness to magnetic fields. Unlike basic stainless steels, which are ferromagnetic, most stainless steel varieties (including 316) are austenitic ¡ª or effectively nonmagnetic.

The 200 series is a class of austenitic(highly corrosion-resistant)stainless steels that are characterized by havinglow nickel content. These are also referred to as chrome-manganese (CrMn) stainlesssteel.Austenitic steels, which includes both the 200 and 300 series stainless steels, are defined by their face-centered cubic structure. That is, the crystal structure has one atom at each corner of the cube and one in the middle of each face.

We have been a leading manufacturer and supplier of Duplex 2205 Fittings for the past ten years. Our goal is to produce the best product for everyone at the most reasonable price.

Inconel 718 Fitting (UNS N07718) is a chromium-nickel-molybdenum alloy considered resistant to a wide range of severe corrosive environments, crevice corrosion and pitting corrosion. Inconel 625 Fitting (UNS N06625) is an oxidation and corrosion resistant nickel alloy with excellent water corrosion resistance and high strength. Inconel 601 Fitting (UNS N06601) is a nickel-chromium alloy used for functions requiring heat and corrosion resistance.

This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties.

It has very good resistance to stress corrosion cracking Due to the control of carbon content and grain size, 601 has high creep rupture strength, so 601 is recommended for use in areas above 500 ¡ãC.

Pure titanium is almost 99.2% pure and is a lustrous metal with low density and high corrosion resistance.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

UNS S31600 material is considered a marine grade pipe and is designed without any welds or seams. The grade performs well in different aqueous media and shows resistance to pitting corrosion by chlorides and any contaminants. The superior chemistry of this grade prevents long-term plumbing in water bodies. However, marine-grade pipelines are susceptible to warm waters.

ASTM A234 WPB Fittings are made up of different material grades.ASTM A234 WPB WPC WP5 WP9 WP11 WP22 Fittings Specification
ASTM A234 (ASME SA234) is standard specification of carbon and alloy steel pipe fittings for moderate and high temperature services.

The microstructure of duplex stainless steels is split approximately 50:50 between austenite and ferrite, and the balance of these phases provides the following benefits: Higher strength, approximately twice that of Type 304 austenitic stainless steel . This results in a reduction in the thickness of the plates used in fabrication, resulting in reduced weight, which is of particular importance in structural applications such as pressure vessels, storage tanks and bridges, as well as good weldability of thick plates, good low temperature toughness, stress resistance Corrosion cracking is important in many applications including hot water tanks, processing plants, brewing tanks and desalination plants.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

UNS S32205 Pipe Fittings are applicable in chemical processing, pulp and paper production, marine and other high chloride environments, Liquor tanks and paper machines, Transport and storage, Oil and gas exploration and processing equipments. Oshwin Overseas has huge inventory of Duplex UNS S31803 Pipe Fittings in different standards and different dimensions, thickness and sizes. Oshwin Overseas are proud 2205 Duplex UNS S32205 Stainless Steel Pipe Fittings Suppliers in following forms and shapes.

We are a manufacturer, trader, stocker, supplier and exporter of a full range of Duplex Steel S31803, S32205 Pipe Fittings made of 50-50 Austenitic-Ferritic microstructure with excellent impact toughness and higher resistance to general corrosion.

AL-6XN is a low carbon, nitrogen containing super austenitic stainless steel. The alloy is designed to be a seawater resistant material and has been found to resist a wide range of corrosive environments. Due to the alloy’s corrosion resistance and high strength, AL-6XN is a better choice than traditional duplex stainless alloys and more cost-effective nickel-based alloys.

These fittings are used as matching composition filler materials for welded alloys, forged and cast products. Therefore, re-annealing of cold-worked parts is important for optimum corrosion resistance in Hastelloy C276 butt-welded pipe fittings. To obtain reducing medium in Hastelloy C276 elbow fittings, add 2% (by volume) ethanol or propanol to water.

A versatile alloy, the main reason manufacturers use these stainless steel 304 butt weld joints is their great resistance to general corrosion. Uniform corrosion, or general corrosion, is a common problem in plants where components are exposed to air.