1 – 4 inch short type t, sanitary stainless steel ASTM A403 WPS31254 fittings

These fittings commonly used in pressure pipelines and pressure vessel/tanks at lower temperature.

SS 304 Fitting a kind of common stainless steel,it is generally utilized to create for the make of equipment and parts which needs great comprehensive erosion resistance, execution and formability.

The accumulation of copper to the grade 904L alloys makes it resistant to corrosion, especially phosphoric, acidic, and sulphuric acid.It Is A Kind Of Corrosion And Heat Resistant Steel.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A equal tee is the most common pipe fitting. It is used to either combine or split a fluid flow. It is a type of pipe fitting which is T-shaped having two outlets, at 90¡ã to the connection to the main line. It is a short piece of pipe with a lateral outlet. A tee is used for connecting pipes of different diameters or for changing the direction of pipe runs. They are made of various materials and available in various sizes and finishes. They are extensively used in pipeline networks to transport two-phase fluid mixtures.

Hastelloy B2 pipe bend provides resistance to pure sulfuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Monel 400? is a nickel-copper alloy that is hardened by cold working only. The various types of available fittings are Monel Stub end, Monel Reducer, Monel End Cap Fittings, Monel tee, etc.

Stainless Steel A403 WP304 / 304L contains higher chromium and low carbon content.The SS 304 Pipe Fittings has different grades of austenitic steel alloys that could be used for different purposes.

Hastelloy X pipe bend is widely used for a variety of chemical processing parts, including retorts, pyrolysis tubing, and muffles due to its exceptional resistance to stress-corrosion cracking.

Stainless steel as a family of metals is very corrosion resistant but with the addition of molybdenum into 316, this increases the grades ability to withstand harsh environments. Often referred to as marine grade, 316 pipe bend is suitable for use in environments that are more aggressive than ambient although care should still be taken to clean the metal regularly to prolong its service life.

Inconel alloy butt welded joints are used in all steel industries due to their high quality raw materials and design. Not sure, but mostly the steel and metals industries buy products so that butt welding can take the pressure. It is mainly used in the petrochemical industry because butt welding performs well in terms of processing temperatures, but also the automotive and refining industries are major users.

Stainless steel 304 elbow fittings are also used in shipbuilding, pressure vessels, boilers, construction, wind energy engineering, etc. Our stainless steel 304L tee fittings are also difficult to dilute sulfuric acid solutions to 120 degrees Fahrenheit.

One of the greatest benefits of Inconel 600 fittings is their ability to maintain their performance even at high temperatures. It has a minimum yield strength of 310 MPa and a minimum tensile strength of 655 MPa. It has an elongation of 40%, which is pretty good. Inconel 600 material has a melting point of 1413 degrees Celsius, which makes it ideal for high temperature applications and has a long service life. It can be easily bent and welded, and the size can be customized according to specific requirements.

Butt weld elbows in the Incoloy 825 series are one of the strongest and most versatile elbows types. These fittings can be easily attached to pipe because they have beveled ends that meet ASME B16.25. These elbows allow the module to create full penetration welds without any additional penetration or preparation. The fittings are welded according to the butt welding procedure, placing them on the assembly and welding in place. Welded connections in this range provide a strong and high-strength connection. These fittings are available in larger and stronger sizes compared to other grades of fittings.

Process piping systems rarely travel in a straight line from process to process.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

UNS N06601 elbow has good heat resistance and high plasticity. The alloy can be strengthened by cold working, and can also be connected by resistance welding, soldering, or brazing. It is suitable for making oxidation resistance no low load below 1100C.

These duplex accessories are supplied in various industries such as brewing tanks, boiler construction and desalination plants. We stock a full line of 2205 Duplex Fittings to meet your piping requirements.

Monel 400 is made up of nickel and copper along with trace elements comprising of iron, manganese, carbon, and silicon. Monel 400 Fittings has excellent resistance against acids and alkalis thereby, being extremely corrosion resistant.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

316L Pipe Fittings the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

Street elbows can also be used in tight spaces where conventional elbows cannot be easily installed. These elbows are available with a 90-degree bend angle, but are also available in 45 and 22.5 degrees. These Alloy 800 fittings are commonly used in sewers, drains, vents, gas pipes and more.

Stainless steel grade 316Ti is a titanium stabilized version of alloy 316. This austenitic chromium-nickel stainless steel grade contains substantial addition of molybdenum which is why the Stainless Steel 316Ti Pipe Fittings exhibits several important characteristics. For instance, grade 316Ti show an increase in the corrosion resistance properties along with improved resistance to pitting chloride ion solutions as well as increased tensile strength at elevated temperatures.

Sanitary accessories 304 are designed and manufactured for food, beverage, medical, pharmaceutical and biological applications that require cleanliness and sterility. These accessories are made of materials that ensure sterility and remain sterile during operation.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Incoloy 800, 800H and 800HT have nearly identical chemical composition and physical properties.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In addition to our extensive inventory, HT PIPE stocks a wide variety of thermoplastic, sanitary, plastic lined and nickel alloy pipes, fittings and flanges. We have a full team of industrial sales experts who can answer any of your questions and find the material you need.

We are having a team of dynamic and experienced professionals who are observing and supervising the whole process to avoid defects. SS 316/ SS 316L Compression Tube Fittings are suitable to use in chemical, food, beer, decorate, and fluid applications industries. Due to the additional Molybdenum, SS 316 Compression Fittings has better corrosion resistant properties and higher strength than grade 304. We supply best-in-class products, meeting and exceeding our client¡¯s expectations.