1-4 inch ss tee stainless steel double ferrule compression fitting

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Alloy 600’s high chromium content makes it significantly more resistant to oxidation than pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy has a high level of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.

Pipe plugs are defined as cap end of fractional tubes used in a large number of industries. These pipe plugs are designed to insert into the end of tubing to dead-end the flow. Various materials are used to manufacture high quality tube plugs in a variety of end connections.

Since only one type of carbon steel forging is specified in this standard, a105 is considered a type of forging carbon steel grade.

ASTM A105 is an iron-carbon alloy with carbon content of 0.0218%~2.11%. Also called carbon steel.

The use of branch fittings instead of conventional fittings (buttweld tee, reinforcing pads and saddles) has the following advantages (example Weldolet):

Just 2 welds are needed, instead of 3 (less work and weld inspections)
Accelerated installation time
Less space is required, making the piping system design more flexible
The flow is fully unrestricted, due to the funnel design

These Nickel 201 Ferrule Fittings are an improvement over Nickel 200 to control carbon and prevent it from embrittlement due to intergranular deposits in many processes at temperatures between 600¡ãF and 1400¡ãF. Our Nickel 201 double ferrule fittings also have a high Curie temperature and good magnetostrictive properties. These annealed alloy 201 pipe fittings have low hardness and good ductility and ductility.

A105 forged fittings are continually working harder in order to improvise the quality of the product as well as offered services.

A socket weld is a pipe connection detail in which the pipe is inserted into a recessed area of a valve, fitting or flange. It is mainly used for small pipe diameters and is generally used for pipes with a nominal diameter of NPS 2 or less.

The Inconel 625 material used in producing the products in this grade possesses superior strength and hardness.

The products we offer meet standards such as ASME B16.11 and ANSI B16.9 and are regularly inspected at every stage of production to ensure high quality, corrosion resistance and high durability.

The Inconel 625 is highly resistant against corrosion and oxidations mediums in various environments.

ASTM A105 is a carbon steel material grade that has the greatest and widespread use. This is used in manufacturing forge piping components.

The Curie temperature of this alloy lies within the ambient temperature range and is affected by changes in the alloy’s chemical composition. Caution is recommended in applications requiring strong non-magnetic properties.

The a105 is a mild steel forgings similar to the 20 steel.

Being a trailer product, threadolets are designed for specific conditions based on Process piping Code ASME B31.3, hence, Dimension is also specified by the designer. However, MSS-SP-97 provide dimension requirements for standard 90¡ã self-reinforced branch connection with butt, socket and threaded end types

These ASTM A182 alloy steel pipe fittings are suitable for high temperature and high pressure environments.

Inconel 625 Butt weld Pipe Fittings, Stockist of Inconel UNS N06600 Buttweld Pipe Fittings, Inconel 601 Elbow Dealer in India, 718 Alloy Buttweld Fitting, Global Supplier of Inconel 600 Butt weld Pipe Fittings, ANSI B16.9 Inconel 625 Reducer, B366 Inconel 601 Commercial Pipe Fittings.

Half Coupling is used for small bore branching from a vessel or large bore pipe. It can be threaded or socket type. It has a socket or thread end on only one side.

According to different varieties and requirements of pipe fittings, forging pipe fittings mainly adopts die forging, free forging and cutting forming processes.

ASTM A182 refers to low-alloy steel forgings. It belongs to carbon steel.

Cupro Nickel Forged forgings are annealed at temperatures between 593 and 816 degrees Celsius (1100 and 1500 degrees Fahrenheit). Copper-nickel forged threaded crosses are still widely used in modern shipbuilding.

Coupling is a kind of fittings commonly used in industrial pipe connection.

AISI 316 stainless steel has better corrosion resistance than 304 stainless steel and has good corrosion resistance in pulp and paper production. In addition, 316 SS has good corrosion resistance in marine and corrosive industrial environments.

Typical applications of Inconel 800 include the food and beverage industry, in addition to being used for heat treatment components.

Threadolet is a type of self-reinforced branch fitting developed by a Company called Bonney Forge. It is used whenever threaded branch connections are required from the pipe header. Mostly, it is used for small size piping with a low-pressure application.

Alloy 800 offers general corrosion resistance to many aqueous media and, by virtue of its content of nickel, resists stress corrosion cracking.

A?threadolet?is the same basic design as a “weldolet.” However the main difference is the fitting has a female threaded connection to mate to the branch connection. This makes a 90¡ã branch and comes in full size or reducing for a straight piece of pipe.

Boss is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld Fittings are mainly used for small Pipe Diameters (Small Bore Piping); Generally for Piping whose Nominal Diameter is NPS 2 or smaller.

Cu-Ni forged threaded fittings are usually supplied as redrawn tubes in the annealed condition. The combination of good ductility and strength provides excellent formability. In addition to this, these forged fittings are also resistant to rust, oxidation, pitting, stress cracking and crack stress.

We produce 90/10 Cu-Ni butt welded pipe fittings that are easy to weld, easy to manufacture and inherently resistant to biofouling.