1-4 inch stainless steel tee compression fitting

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

ASTM A105 is a carbon steel material grade that has the greatest and widespread use. This is used in manufacturing forge piping components.

ASTM A105 (also known as ASME SA 105) covers seamless forged carbon steel piping components for use in pressure systems at ambient and high-temperature service.

Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee (Tee reducer), both are used to divide (combine) the pipelines to adjust the flow rate and change the direction.

ASTM A182 refers to low-alloy steel forgings. It belongs to carbon steel.

ASTM A182 Alloy Steel Pipe Fittings are very easy to install and have a low hub due to the pipe going into the fitting before welding.

The heated carbon steel is then machined into the forged steel fittings. carbon steel astm a105 fittings is used for ambient- and higher-temperature service in pressure systems.

A pipe fitting, for pipe or pipe, is a very short piece of pipe or pipe with a socket or female pipe thread on one or both ends that allows two pipes or tubes of the same or different sizes to be joined together.

The high chromium content gives these forgings fittings very good resistance to moisture erosion, which also contributes to their high temperature strength and resistance to scaling at high temperatures.

If hardened Monel 400 is the goal, cold working with a soft tooling material is the only option. By cold working, mechanical stress is used instead of heat to change the shape of the metal.

This nickel alloy has good corrosion resistance, good wear resistance and high strength.

For the pipe fittings of small size, such as tee, tee and elbow of socket welding and thread, the shape is relatively complex, so the die forging process should be used.

ASTM A105 fittings possess a minimum tensile strength of 485mpa with a minimum yield strength of 250mpa. These fitting can be elongated by 22% and possess a hardness of 137 to 187 HBW. Our company is an ASTM A105 Forged Fittings manufacturer in India who make use of top-of-the-line technology to produce the best components in the industry. These coupling can be half or fully coupled. The Full Coupling A105 is employed in connecting small bore pipes. It is utilized in connecting a pipe to another pipe or to a swage or nipple. A105 Half Coupling is utilized for smaller bore branching from a large pipe bore. These couplings can be threaded and welded. A105 Threaded Coupling is preferred in applications where stress on the system is less. We are exporter and manufacturer of Carbon Steel A105 grade for forged pipe fittings.

These Nickel 201 Ferrule Fittings are an improvement over Nickel 200 to control carbon and prevent it from embrittlement due to intergranular deposits in many processes at temperatures between 600¡ãF and 1400¡ãF. Our Nickel 201 double ferrule fittings also have a high Curie temperature and good magnetostrictive properties. These annealed alloy 201 pipe fittings have low hardness and good ductility and ductility.

Hence, materials with low carbon content such as ASTM A105 Fittings are not recommended to be used in those applications which have the need to be constantly exposed to a range temperatures above this value.

In simple terms, a steel pipe elbow is a pipe fitting connected between two pipes. The main purpose is to change direction. As we all know, steel pipe elbows can be divided into different degrees, generally there are 45-degree steel pipe elbows, 90-degree steel pipe elbows and 180-degree steel pipe elbows. Other angles such as 60¡ã or 120¡ã are also available for piping systems in case of special requirements.

INCOLOY alloy 800 is used in a variety of applications involving exposure to corrosive environments and high temperatures.

As an ISO certified company, we stand by the principles of quality, safety, and precision in all our products.

Weldolets are the most popular type of branch fittings, belong to the buttweld fittings family, and are available in a wide range of dimensions.

Just as the corrosion resistance characteristics of carbon steel could be improved by further processing, it is possible to increase the mechanical properties of the ASTM A105 Fittings with the use of heat treatments.

Hastelloy C276 bushings have excellent resistance to strong oxidizing salt solutions such as ferric chloride and cupric chloride. Alloy C-276 has excellent phosphoric acid resistance at all temperatures below boiling point and concentrations below 65%.

Forgings mainly include die forging, free forging and cutting forming processes to manufacture pipe fittings.

Boss is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld Fittings are mainly used for small Pipe Diameters (Small Bore Piping); Generally for Piping whose Nominal Diameter is NPS 2 or smaller.

Since only one type of carbon steel forging is specified in this standard, a105 is considered a type of forging carbon steel grade.

A fitting or adapter is used in pipe systems to connect straight sections of pipe or tube, adapt to different sizes or shapes, and for other purposes such as regulating (or measuring) fluid flow.[1] These fittings are used in plumbing to manipulate the conveyance of water, gas, or liquid waste in domestic or commercial environments, within a system of pipes or tubes.

According to different varieties and requirements of pipe fittings, forging pipe fittings mainly adopts die forging, free forging and cutting forming processes.

Nickel fittings are manufactured through a hot or cold forming process, which means it can be bent and formed into the correct shape.

The Inconel 625 material used in producing the products in this grade possesses superior strength and hardness.

INCOLOY alloy 800 (UNS N08800, W. Nr. 1.4876) is a widely used material for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500¡ãF (816¡ãC).

a105 is also a material code, belongs to the special steel, is a cold forged steel. The a105 is a mild steel forgings similar to the 20 steel.

ASTM 182 is used for pressure systems, including fittings, flanges,and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.