1-4 npt 6000psi stainless steel female 3 way tee pipe fittings

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with good mechanical properties from sub-zero temperatures up to about 550 ¡ãC (1020 ¡ãF) and is approved for pressure vessels with wall temperatures from -10 to 425 ¡ãC (14 to 800 ¡ãF) according to VdTUV-Wbl. 263 and up to 900 ¡ãF (480 ¡ãC) according to ASME Boiler and Pressure Vessel Code.

SD UNS S32750 reducer is having very good yield potency and ductility as compared to the other austenitic metals and thus fabrication will find an augmented radius of meandering, higher materializing force and greater allowances for the spring back.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

The stainless steel 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Stainless steel butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. 90 degree elbows are available in long radius and short radius.

The fittings are also hard with a Brinell hardness sore of 210HB maximum. These can also operate under very high temperatures up to 870 degrees Celsius.

Type 304 is the most popular stainless steel and is a natural choice for its corrosion resistance. It resists rusting in many different environments, but is primarily attacked by chlorides.

We are having a team of dynamic and experienced professionals who are observing and supervising the whole process to avoid defects. SS 316/ SS 316L Compression Tube Fittings are suitable to use in chemical, food, beer, decorate, and fluid applications industries. Due to the additional Molybdenum, SS 316 Compression Fittings has better corrosion resistant properties and higher strength than grade 304. We supply best-in-class products, meeting and exceeding our client¡¯s expectations.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

Inconel 625 also commonly goes by the names: Haynes 625, Altemp 625, Nickelvac 625, and Nicrofer 6020.

HASTELLOY C-276 alloy (UNS N10276) was the first wrought, nickel-chromiummolybdenum material to alleviate concerns over welding (by virtue of extremely low carbon
and silicon contents).

HT PIPE offers a range of precision finished duplex fittings & flanges to ensure a good flow in seamless. Our flanges are corrosion resistant & designed to operate in high pressure environments. Here at HT PIPE we supply a broad range of piping products and materials which are used in many different industries.

The SA 420 WPL6 Elbow is one of the most used types in many applications because it is needed to change the direction of a pipe line.

Type 304 stainless steel is an austenitic grade that can be drawn very deep. This characteristic has resulted in 304 being the primary grade used in applications such as sinks and pans.

Alloy X pipe bend is one of the most widely used nickel base superalloys for gas turbine engine components.

Stainless steel 316 butt weld joints are made of chrome-nickel-molybdenum alloy austenitic stainless steel. The material has good corrosion resistance, similar strength to 304 grade steel, and good hardness.

The Incoloy 825 consists of small amounts of copper, titanium, and molybdenum, contributing to its excellent mechanical properties. The Incoloy 825 Pipe Fittings have high resistance to pitting and crevice corrosion.

The tensile strength of this superalloy is 690 MPa, while its yield strength measures 275 MPa.

These Buttweld 45 Degree Weld Elbows with Tangents are manufactured to very high tolerances via hydroforming. Hydroforming results in a more uniform fitting that is easier to weld and polish. This manufacturing method allows us to supply a superior quality fitting regardless of the application. Suitable for use in applications ranging from food and beverage, dairy, and pharmaceutical to marine and automotive.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Grade 310 is a medium carbon austenitic stainless steel used in high temperature applications such as furnace components and heat treating equipment. It is used in continuous operation up to 1150¡ãC and intermittent operation at 1035¡ãC. The 310S grade is a low carbon version of the 310 grade. 310 stainless steel has good oxidation resistance and can be used continuously at temperatures up to 1140oC in the absence of reducing sulfur gases. With its high chromium content, 310 stainless steel has good corrosion resistance for improved high temperature performance.

These Stainless Steel 316L Pipe Fittings have high tensile strength, smooth internal finish, solidity and it is precisely designed. We also offer competitive range of Steel 316L pipe fittings like Stainless 316l tee, Steel 316l pipe reducer, steel 316l elbow, ss 316l butt weld fitting stub end and stainless steel 316l pipe caps in client¡¯s requirement.

Super duplex 2507 / UNS S32750 pipe fittings have great resistive properties to chloride stress corrosion cracking and a high thermal conductivity with a low coefficient of thermal expansion. These pipe fittings have a great resistance to inorganic acids used in dilute hydrochloric acid.

We are stocking 22 WPHY 52. Petromet is distributor and dealer of Mss SP75 WPHY 52 Equal Tee, ASTM A860 WPHY 52 Reducing Tee in various sizes.

Alloy 800H/800HT is frequently used in applications that involve long-term exposure to elevated temperatures where resistance to oxidation, carburization and other types of elevated temperature corrosion is required.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless steel reducer tee is widely used in the construction and overhaul of petrochemical, petroleum, liquefied gas, chemical fertilizer, power plant, nuclear power plant, shipbuilding, papermaking, pharmaceutical, food sanitation, urban construction and other industries.

Hastelloy B2 pipe bend has excellent resistance to all temperatures and concentrations of hydrochloric acid.

Alloy 20 pipe fitting is a chromium-iron-nickel-based, austenitic alloy that comes with excellent corrosion resistance in chemical environments. It contains sulfuric acid and many aggressive media well. The alloy is stabilized with niobium that helps it to resist intergranular corrosion.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.