1-4 to 4 chinese ss201 ss304 ss316 2205 stainless steel elbow of pipe fitting

It exhibits exceptional corrosion resistance in chemical environments containing phosphoric acid, nitric acid, chlorides and sulfuric acid. It also has good mechanical properties at both ambient and elevated temperatures.

As a butt weld fitting, it works with lap flanges. The use of stainless steel short pipe ends and lap flanges can effectively reduce pipeline maintenance costs. In stainless steel piping systems or advanced systems, we can choose low-grade lap flanges with stainless steel short pipe ends as an alternative to flanged connections instead of butt-welded flanges, effectively reducing manufacturing costs.

Stainless steel as 304 or 316 casting combines good corrosion resistance and high strength, which allows the reduction in wall thickness and weight of pipe fittings. Besides, it can withstand very high flow rates, making it capable to withstand long-term exposure to the elements in almost any environment.

HT PIPE offers a range of precision finished duplex fittings & flanges to ensure a good flow in seamless. Our flanges are corrosion resistant & designed to operate in high pressure environments. Here at HT PIPE we supply a broad range of piping products and materials which are used in many different industries.

Available in both 304 and 316L stainless steel alloys. This product is manufactured in accordance with 3A Standards for use in sanitary line processing including food, beverage, and pharmaceutical industries.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Different pipe fittings have different materials. The main difference between carbon steel pipe fittings and stainless steel pipe fittings is steel, and stainless steel belongs to alloy steel.

Duplex steel pipe fittings are the profession of repairing or installing pipes or piping systems that carry liquids, gases and occasionally solid materials. It is a ferritic-austenitic microstructure with a phase balance of approximately 50% ferrite and 50% austenite.

601 is widely used in Isolation tanks in ammonia reforming and catalytic support grids in nitric acid manufacturing, exhaust system components and combustion chamber of solid waste incinerator.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

The addition of copper and molybdenum to DIN 1.4301 fittings produces pitting and crevice corrosion, as well as resistance to adverse environments. It seems to fall into the Flawless and Nickel categories as it has its own characteristics. It is an austenitic metal used for sulfuric acid packaging. It has excellent corrosion resistance to sulfuric acid.

Hastelloy C276 alloy, UNS N10276, 2.4819, is the most widely used and versatile corrosion resistant nickel alloy.

Duplex steel UNS s31803 pipe fittings are mass produced and widely used duplex steels. This grade of steel can withstand stress corrosion cracking due to contact with sulfur. UNS S31803 elbow grade is inherently economical and reliable as it provides longer service life. Duplex steel UNS S31803 fittings are easy to weld and will not expand at high temperature and stress levels.

Duplex S31803 stainless steel butt welded pipe fittings are used in desalination, boiler manufacturers and brewing tanks. They are generally lower cost and have a lower percentage of alloying elements. They are suitable for ASTM A 815, A812 and ASME SA 815, SA 812 specifications.

The function and material of sanitary pipe fittings are basically the same as those of industrial stainless steel pipe fittings. However, it is used in the hygiene and food industry, and can be divided into welding type, screw type and clamp type according to the connection method.

Sustained or prolonged exposure of Type 316L to 800-1500¡ãF (427-816¡ãC) may be harmful. In addition, stress relief between 100-1500¡ãF (593-816¡ãC) may cause this Type of slight embrittlement.

The schedules of the fittings range from 5s to XXS.Fittings over NPS12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be annealed, normalized, or normalized and tempered. And these fittings inlcudes elbow, tee, reducers, the carbon content shall les than 0.26%. NPS12 under no need to be heat treated under this forming process.

Pipe caps are used in plumbing equipment such as domestic, commercial and industrial water supply lines, machinery and process equipment. Pipe caps are also installed on the pump line for the sole purpose of removing air blockages. We provide 1-8- 6 size duplex 2205 pipe fitting cap.

Stainless steel pipe fittings are used to connect 2 pipes as they have a pipe fitting at one or both ends. The stainless steel reducing tee has a tensile strength of 515 MPa and a yield strength of 205 MPa.

Duplex steel UNS S32205 fittings (austenitic and ferritic) are widely used for functions requiring excellent corrosion resistance and efficacy. Duplex steel UNS S31803 butt welded pipe fittings generally have excellent corrosion resistance compared to other austenitic steels.

The advantages of stainless steel butt-weld end caps include permanent leakage prevention, increased strength and power of the pipeline structure, and reduced pressure loss, but the stainless steel cap is firmly fixed and cannot be loosened like a blind man to enter the pipeline flange.

The resistance of the Monel 2.4360 eccentric/concentric reducer to salt solutions and its excellent resistance to stress-related corrosion cracking make the Monel 2.4360 eccentric/concentric reducer ideal for surviving in most freshwater bodies.

The elbow is used to turn the direction of a pipe line regularly by 90 degrees angle.These pipe fittings used in pressure pipelines and pressure vessel fabrication for servic at moderate and increased temperatures. Fittings out of above standards shall be complied with A960/A960M.

Among the various grades of stainless steel, one grade is austenitic steel containing columbium. Fittings made from it are called stainless steel 347 fittings. They are widely used at high temperatures and have amazing forming and welding quality. The addition of columbium to stainless steel 347 weld fittings provides resistance to intergranular corrosion. It also shows improved corrosion resistance in strongly oxidizing environments. They are widely used to install, connect and configure other products.

Monel K500 alloy has excellent corrosion resistance, and has higher strength and hardness than Monel 400. This is due to the addition of elements such as Al and Ti to the alloy, and after a certain heat treatment, there are dispersed intermetallic compounds on the substrate.

We have a massive stock of Super Duplex WPS 32750 Tee, known for its high ductility, and its excellent corrosion resistive nature makes it an excellent option for marine applications.

There are 5 most common ASTM A234 WPB Elbow are in mainly in demand, the 45¡ã, 90¡ã and 180¡ã elbows, all three in the “long radius” version, and in addition the 90¡ã and 180¡ã elbows both in the “short radius” version.

317L stainless steel 180 degree elbow has very high corrosion resistance, but it is getting more and more expensive. The products we offer are known throughout the world for their reliability and quality.

The UNS N10276 Fittings have high tensile strength even at elevated temperatures and demonstrate good performance under high pressure. The tensile strength of the ASTM B366 UNS N10276 Stub End is about 105.4 Ksi.The ASTM B366 WPHC276 End Cap has great fabrication properties. B366 WPHC276 is easily fabricated by cold working. Although the Grade WPHC276 Reducer can be hot worked, the process needs to be carried out adhering to certain parameters

The machinability of 316 pipe bend is about 60% that of AISI B1112 resulphurised free cutting carbon steel. A free machining version of 316 is available as bar.