1.4462 DIN934 hex but duplex hex nut

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Duplex stainless steel is designed to combine improved resistance to stress corrosion cracking (including sulfide stress corrosion cracking), pitting, crevice corrosion and high strength when compared with other stainless alloys.

ASTM A790 specified 2205 Stainless Steel Pipe ability to resist stress related corrosion cracking.

ASTM A182 F53 Flange is a high strength flange that has 550MPa minimum yield strength and 800MPa minimum tensile strength.

The Duplex Steel Pipe gets its name from the dual nature present in the microstructure of the alloy. Duplex Stainless Steel Seamless Pipe have good mechanical characteristics and can be used in an as welded condition. Considered to be superior in comparison to austenitic alloys ASTM A312 TP304 or ASTM A312 TP316, the Seamless Duplex Pipe offers much better resistance to corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The high oxidation resistance property of Grade 2205 is marred by its embrittlement above 300¡ãC. This embrittlement can be modified by a full solution annealing treatment. This grade performs well at temperatures below 300¡ãC.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

For many applications where 300 series stainless steel is susceptible to chloride stress corrosion cracking, 2205 duplex stainless steel is a cost-effective solution. Stress corrosion cracking occurs when stainless steel is subjected to tensile stress while in contact with solutions containing chlorides. Elevated temperatures also increase the susceptibility of stainless steel to stress corrosion cracking.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.52

The round and hollow pipes are usual ones. In addition to the Duplex Stainless Hollow Pipes and the Duplex Steel Round Pipes there are square, rectangular and hexagonal pipes available in the market.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Alloy 2507 is highly resistant to carbide-related intergranular corrosion.

Duplex 2205 stainless steel (ferritic and austenitic) is widely used in applications requiring good corrosion resistance and strength. Grade S31803 stainless steel was modified several times to form UNS S32205, which was recognized in 1996.

Alloy 2205 duplex stainless steel plate is an alloy duplex stainless steel plate containing 22% chromium, 3% molybdenum, and 5-6% nickel nitrogen.

2205 duplex stainless steel is more than double that of ordinary austenitic stainless steel. This characteristic allows designers to reduce weight when designing products, giving this alloy a price advantage over 316,317L.

Austenitic has a low strength and a low resistance to stress corrosion cracking, while ferritic also has a low strength, poor weldability and poor low temperature toughness. Producing a chemical composition that combines austenitic and ferritic results in a metal that has a higher strength, good weldability, good toughness and resistance to stress corrosion cracking.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

UNS31803 has been supplemented by S32205 (F60) which dual conforms to S31803 but has a higher minimum N, MO, NI and Cr which guarantees a better corrosion resistance.

2205 is also more formable under pressure than other ferritic grades. The greater toughness of this grade also outweighs most of its concerns.

Duplex 2205 round steel contains 22% chromium, 3% molybdenum, and 5-6% nickel. In addition to excellent impact toughness and high strength, it also has high general, local and stress corrosion resistance.

The chemical composition of 2205 Duplex Stainless Pipe consists of the elements being used in the following content i.e. – 22% chromium, 3% molybdenum and about 5 to 6% nickel. Because of the content, in terms of quantity of chromium present in the alloy of this grade, this stainless steel is also referred to as 22cr Duplex 2205 Pipe.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Super Duplex Steel have the benefit as it counterpart ¨C it has lower alloying costs when compared with austenitic grades and ferritic.

2205 is the most widely used duplex (ferritic/austenitic) stainless steel grade. It finds applications due to both excellent corrosion resistance and high strength.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex 2205 nuts and nuts are widely used in applications requiring good corrosion resistance and strength in marine and harsh environmenuts.

Alloy 2205 (UNS S32305/S31803) is a 22% chromium, 3% molybdenum, 5-6% nickel, nitrogen alloy duplex stainless steel plate that, in addition to high strength and excellent impact toughness, also has high general, Localized and stress corrosion resistance.

Our duplex steel UNS S31803 fasteners are available in different grades such as industrial washers, industrial screws, stainless steel washers, stainless steel screws and more.

The standard austenitic steels like 304 (1.4301) and ferritic steels like 430 are relatively easy to make and to fabricate. As their names imply, they consist mainly of one phase, austenite or ferrite. Although these types are fine for a wide range of applications, there are some important technical weaknesses in both types.

The different face types have their own advantages in piping applications.

La tuberia ERW se usa en aplicaciones que requieren una soldadura extensa para la instalacion. Los usos de la tuberia duplex ASTM A790 UNS S32205 no se limitan a aplicaciones industriales, tambien se pueden ver en aplicaciones domesticas de bajo costo.

ASTM A1082 specification alloy S31803 fasteners have higher pitting and crevice corrosion than stainless steel alloy 316. Due to its higher corrosion resistance, alloy grade UNS S31803 is able to exhibit better fatigue strength than other commonly used austenitic stainless steel grades in environments containing corrosive media.

Super Duplex Stainless Steel is known to have better stress corrosion, cracking resistance and mechanical properties than any other type of steel.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The material has high strength values. The minimum yield strength is 450MPa and the minimum tensile strength is 620MPa, with 25% minimum elongation and 290HB Brinell hardness.

The machinability of 2205 steel pipe is low due to its high strength. The cutting speeds are almost 20% lower than that of grade 304.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex plates have a two-phase or two-phase microstructure. The microstructure of the duplex steel S32205 foil consists of equal proportions of ferrite and austenite.

Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment.