1.4462 hex nut manufacturer duplex hex nut

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

2205 helps users to avoid stress corrosion cracking that is typically seen with 316 and 317.

This is the main reason why Super Duplex Flanges note an improvement of tensile strength over ferritic and austenitic steel grades.

Compared with ferritic stainless steel and austenitic stainless steel, duplex stainless steel pipe has good welding performance. It is neither like the welding heat affected zone of ferritic stainless steel, because of the grain coarsening, the plastic toughness is greatly reduced, nor like austenitic stainless steel, it is more sensitive to welding hot cracks.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex steel UNS S31803 round bar is widely used for ferritic and austenitic duplex stainless steel bars.

Thread friction between the nut and bolt creates a strong, steady and even force holding the componenuts together. The most commonly used ASTM A182 UNS S32205 fastener nuts are regular hex nuts. At the same time, duplex stainless steel fasteners are strong and corrosion resistanut, combining the healthy properties of ferrite and austenite. The material also has a 90ksi minimum tensile strength and a 65ksi minimum yield strength. 2205 duplex stainless steel bolts have an elongation of 25% and a hardness of 217HBW.

S31803 Duplex Steel is a 22% chromium duplex (austenitic/ferritic) steel with moderate to good strength and good general corrosion/stress corrosion/cracking resistance.

S32760 has very good resistance to localized corrosion and stress corrosion cracking and high mechanical strength.

Duplex 2205 flanges offer good sulfide corrosion resistance, as well as chloride pitting and crevice corrosion resistant superior to 317L.

Duplex stainless steel fasteners are made from alloys with high chromium content and low to moderate nickel content.

The chemistry of this steel ensures better performance with higher mechanical properties in comparison to austenitic stainless steel pipes.

The yield strength of duplex stainless steel is twice that of austenitic stainless steel. This feature allows designers to reduce weight when designing products, making this alloy more cost-effective than 316, 317L.

Los tubos super duplex producidos segun la especificacion ASTM A790 se suministran en construccion sin soldadura o soldada. El proceso automatizado para fabricar tubos super duplex no utiliza metales de aporte. Los proveedores de tuberias super duplex recomiendan estas tuberias para aplicaciones propensas a la resistencia general a la corrosion.

Unlike the conventionally used austenitic 300 series stainless steels, duplex stainless steels generally have exaggerated properties. Duplex tube suppliers recommend using only this alloy as it combines both properties to produce positive results.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.55

The 2507 pipes could also be electric fusion welded. The Pipes Manufacturer comes under five different classes with each class having a special mechanical property setup. The electric resistant welded pipes are stronger and they could be used for extensive welding.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

We are manufacturers of ASTM A182 Duplex UNS S32750 / S32760 Flanges show enhanced pitting corrosion resistance in saline environments, brackish waters, bleaching operations, and selected food processing applications.

Super Duplex are trace amounts of carbon, phosphorus, sulfur, silicon, nitrogen, and copper. It has great general consumption resistance, proposed for applications up to 600¡ã F, and low rate of warm development.

The ASTM A182 UNS S32750 Slip On Flanges are good to use with seamless pipes.

The microstructure of ASME SA 479 Duplex Steel UNS S32205 Flat Washers includes a combination of ferritic and austenitic phases. ASTM A479 Duplex Steel UNS S31803 Gaskets have excellent general corrosion resistance in a variety of aggressive chemicals including industrial and seawater acids. Buy duplex stainless steel washers from us at leading market prices.

UNS S32205 nuts (also known as S31803) are manufactured from high-grade duplex 2205 stainless steel. Since this material is composed of at least 22% chromium, 6% nickel and 3% molybdenum it can withstand several unique types of environmental inflexibilities that other metals cannot such as corrosion, cracking, erosion, pitting and more. Super duplex stainless steel 2205 nuts also provide twice the mechanical strength compared to standard stainless steel.

The content of chromium, molybdenum, nickel and nitrogen in the 2205 duplex bolt alloy enhances its mechanical properties. E.g. ¨C UNS S31803 Fastener alloys contain trace amounts of carbon.

The mechanical strength, corrosion resistance and low temperature toughness of the ASTM A182 F53 Flanges is higher than that of ordinary duplex stainless steels.

Compared with ferrite, it has higher plasticity and toughness, no room temperature brittleness, significantly improved intergranular corrosion resistance and welding performance, and maintained 475 ¡æ brittleness, high thermal conductivity and Superplasticity of ferritic stainless steel. Compared with austenitic stainless steel, its yield strength is significantly improved, and its resistance to intergranular corrosion, stress corrosion, corrosion fatigue and abrasion is significantly improved.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2507 has a higher chromium and molybdenum content which gives the super duplex greater corrosion resistance than other standard duplex grades.

Alloy 2507 is a high strength duplex alloy. Super Duplex Plate is a dual ferritic and austenitic microstructured component designed with high concentrations of chromium, nickel and molybdenum. Super Duplex 2507 plate is used in systems where extra strength and enhanced corrosion resistance of different systems are required.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.
Teel Industry has grown in the past few decades and there are a variety of products available in the market. ASTM A815 UNS S32750 Pipe Fittings are one of those products and are available in various sizes, shapes, and dimensions. ASTM A815 UNS S32760 Pipe Fittings are designed to be resistant to corrosion and are said to have perfect weldability. These Super Duplex S32750 Buttweld Fittings are resistant to erosion corrosion and fatigue. They have a mixed microstructure of 50% austenitic and 50% ferrite.

S32750 is used for marine applications, flue gas scrubbing equipment, and pulp & paper mill equipment.

Duplex steels have the best resistance to pitting corrosion. This steel has effective fatigue strength to resist corrosion of the steel. The steel can be used in a wide range of heating temperatures in the industry.

ASTM A479 Super Duplex UNS S32750 F53 Heavy Hex Nuts are kept together by a combination of their threads’ friction (by means of slight elastic distortion), a small widening of the bolt, and solidity of the components to be held together.

Offshore marine engineering plants need compenents that meet their rugged demands, components that have mammoth strenght but are light weight.

SA 182 F53 S32750 Flange is a super duplex stainless steel supplied in the hot worked and solution annealed condition.