12820-80 pn16 duplex steel flange

Duplex steel flanges are widely used in the used engineering, machinery and automotive industries. Duplex Steel S31803 Lap Flanges are ideal for applications requiring better corrosion resistance than Type 316 and good high temperature strength. We have Duplex Steel S31803 / S32205 Flanges in stock. Duplex steel flanges are commonly used in chemical, petrochemical, and power industries.

UNS S32205 Duplex Steel ASME SA182 Butt Weld Flanges are suitable for seawater and power generation equipment because their smooth surfaces can withstand temperatures up to 600¡ãF, while also having excellent flow characteristics.

For many applications where 300 series stainless steel is susceptible to chloride stress corrosion cracking, 2205 duplex stainless steel is a cost-effective solution. Stress corrosion cracking occurs when stainless steel is subjected to tensile stress while in contact with solutions containing chlorides. Elevated temperatures also increase the susceptibility of stainless steel to stress corrosion cracking.

Use of duplex and super duplex stainless steels should be limited to below 570¡ãF, as prolonged exposure to high temperatures can make the material brittle.

The combination of the ferritic phase and austenitic phase provides both high strength and excellent corrosion resistance.

The ASTM A182 UNS S32750 Slip On Flanges are good to use with seamless pipes.

The oxidation resistance of these dual phase steel S31803 butt weld flanges is good at high temperatures, but tends to become brittle at temperatures above 300 degrees Celsius, brittle after only 2 hours of exposure at 475 degrees Celsius. These dual phase steel S32205 ring joint flanges also feature high corrosion and erosion fatigue performance as well as lower thermal expansion and higher thermal conductivity than certified.

The combination of chromium, molybdenum and nitrogen provides Duplex 2205 flanges with good chloride pitting and crevice corrosion protection, which makes them useful in marine environments, brackish water, bleach operations, closed loop water systems and some food processing applications. Although it is important to remember that pitting corrosion can be a problem in chloride solutions when oxidizing media are present. Under these conditions, the passive (protective) layer of the Duplex 2205 material may be damaged and localized pitting may occur.

Duplex steel Werkstoff No 1.4462 threaded flanges also cannot be used below -50¡ãC as it will cause a ductile to brittle transition. Duplex UNS S32205 Orifice Flange has a tensile strength of 1,16,000 psi 800 MPa. Whereas the duplex SAF 2205 socket weld flange has a yield strength of 80,000 psi 550 MPa. The 2205 Duplex Butt Weld Flange is a low carbon version that is not affected by sensitization and avoids carbide precipitation in welding applications.

Duplex 2205 is a nitrogen enhanced duplex stainless steel designed to solve common corrosion problems encountered with 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic (such as 304 stainless steel) nor purely ferritic (such as 430 stainless steel).

The flanges could also be manufactured as screwed, threaded or forged types. The forged flanges are made from a single piece of raw material. These are also called the cast flanges.

The A182 F51 material has carbon, 2% manganese, phosphorus, sulfur, 1% silicon, chromium, 4.5% nickel, 2.5% molybdenum and nitrogen it.

Duplex’s superior mechanical and chemical properties are offset by its formability difficulties. These grades are great for simple flanged connections for fixed services, but are less effective when forming complex metal shapes. Fortunately, machinability of dual-phase steels in complex and circular structures is not an issue in structural steels, given the widespread preference for simple mild steels in non-corrosive applications.

The chemical composition of Duplex F51 flanges contains carbon, chromium, manganese, molybdenum, nitrogen, nickel and phosphorus. Flanges are used in pressure systems and valve fittings.

Duplex flanges are made of a special stainless steel with austenitic and ferritic metallurgical features in its microstructure. These are magnetic steels with high corrosion resistance and work hardening.

Butt welding flanges are drilled (machined), and the wall thickness of the flange is the same size as the matching pipe. The lighter the tube, the larger the diameter, and conversely, the heavier the tube, the smaller the diameter. Our range of butt weld flanges, butt weld flanges are typically used for high pressure, low temperature or high temperature.

This is designed to be connected to the piping system by butt welding. It is relatively expensive due to its long neck, but is preferred for high stress applications. The neck or hub transfers stress to the bottom of the hub to the wall thickness at the butt weld, providing significant reinforcement for the flange. Flange holes match pipe holes to reduce turbulence and erosion.

Super Duplex Flanges are designed with high alloy duplex steel. These flanges have a two-phase structure with austenitic and ferritic microstructures. Designed with high concentrations of nickel, chromium and molybdenum, these modules exhibit excellent corrosion and oxidation resistance in stress-inducing systems.

The combination of chromium, molybdenum and nitrogen give Duplex 2205 flanges good protection from chloride pitting and crevice corrosion, which makes them useful for marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications.

Super Duplex Flanges are highly weldable. This alloy can be easily welded by various welding operations. These super duplex flanges are known for their high fatigue strength and provide high strength at moderate temperatures in the lower temperature range.

This provides the flanges with high corrosion resistance and higher mechanical properties. Please contact us for your orders of F53 flanges.

2205 Duplex Steel consists of a two-phase microstructure of ferrite and austenite. When it comes to the chemical composition of 2205 duplex steel flanges, they mainly contain 22% chromium, 3% molybdenum and 5-6% nickel in the form of alloyed stainless steel.

Super Duplex Steel Flanges are ideal for service in severely corrosive environments such as offshore and marine applications. It is also particularly resistant to chloride SCC. Flanges provide equivalent pitting resistance, ensuring very good pitting resistance. All of our product ranges are strength tested, including pitting corrosion testing, toughness testing, chemical and mechanical testing, macro and micro testing, and more.

S32205 is a dual-phase steel with nearly equal proportions of austenite and ferrite in its chemical composition. This combination makes the alloy stronger than standard austenitic steels. The Duplex Steel S31803 Ring Fitting Flange is a low carbon version and is immune to sensitization.

Duplex steel butt welding flange forgings are difficult to form due to their high strength and work hardening rate. However, due to the presence of a large amount of stainless steel, the flange is highly resistant to seawater-related corrosion.

The ASTM A182 F51 flanges refer to standard or non-standard flanges manufactured in accordance with ASTM A182 Grade F51, which is designated with UNS number S31803.

The high temperature strength of dual phase steel slip flanges is similar to alloy grade 430 in the temperature range of 950 to 1150¡ãC. However, the tensile strength of these flanges increases rapidly below 900¡ãC.

These grades are excellent for fixed service simple flange connections, but slightly less so when forming a complex metallic shape. Fortunately, the workability of duplex into complex and rounded structures is less of an issue in structural steel given the wide preference for simple mild steel in non corrosive applications.

The pressure-temperature ratings for ASTM A182 F53 flanges are the same as that for other duplex stainless steels.

Duplex 2205 flanges combine the qualities of stress corrosion cracking resistance and high strength derived from being a ferritic alloy along with its austenitic fabrication capabilities.

These high-strength flanges securely seal a range of plumbing modules. The multifunctional flange shows good stability and exhibits enhanced resistance to chloride pitting in marine applications. With standard welding procedures, Super Duplex Flanges can be easily welded to different piping modules.

We are suppliers of WNR 1.4410 Super Duplex Steel Weld Neck Flanges with matching stub-ends that withstand alkalis under higher temperatures.