150 lbs ANSI B16.5 ASTM SB564 UNS 10665 2.4617 SO Flange

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Las propiedades de la aleacion c276 permiten una excelente resistencia a la corrosion en areas corrosivas por agua.

C22 has excellent resistance to chloride-induced localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking.

ASTM B619 UNS N10276 C276 pipes are also available in other shapes such as square, rectangular and hexagonal pipes. 2.4819 Hastelloy C-276 Alloy C276 pipe is used in applications where bending should not reduce strength. These ASTM B619 N10276 seamless pipes are mainly used to transport fuels from one place to another, as well as chemicals in different parts of processing plants.

Alloy B Its popularity has been hindered by its availability. All of these materials are good against reducing acids, but very hard against oxidizing acids. Due to the high molybdenum content, this alloy is relatively expensive than other alloys. At the same time, it has excellent corrosion resistance to medium-concentrated sulfuric acid and various non-oxidizing acids, good resistance to chloride stress corrosion cracking (SCC), and good resistance to various organic acids.

Hastelloy UNS N10276 cold drawn bar has excellent resistance in a variety of chemical process environments. For example, Hastelloy C276 UNS N10276 square bar is resistant to corrosion in a variety of media, including strong oxidants (such as ferric chloride and cupric chloride), hot fouling media (may be organic or inorganic), chlorine, acetic anhydride , formic acid and acetic acid, as well as good tolerance to seawater and saline solutions.

These alloys of flanges are exceptionally resistant to stress corrosion cracking petrochemical applications. Moreover, the molybdenum content results in outstanding strength in solid solution alloy that considers excellent fabrication attributes.

Hastelloy B3 Weld Neck Flange is not recommended for use in the presence of ferric or cupric salts because these salts can cause premature failure.

Hastelloy tube has a melting point of 1370 degrees Celsius and is used in power generation, petrochemical, gas processing and chemical equipment. In addition, Werkstoff 2.4819 Hastelloy c-276 tubing is used in industries such as seawater equipment, offshore oil drilling, and paper and pulp.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Hastelloy B3 Flanges has great resistance to cutter line, and heat affected zone attack.

Hastelloy C276 ASTM Standard B575 Plate is a nickel-molybdenum-chromium superalloy with an enhancement of tungsten made to have superb deterioration resistance in a wide variety of extreme atmospheres.It is the chemical composition of the material that permits the Hastelloy C276 Sheet to perform well despite exposure to elevated temperatures.

Two criteria for evaluating oxidation resistance are weight change and depth of corrosion penetration. HASTELLOY X pipe bend excels in both respects due to the formation of a protective, tenacious oxide film.

Hastelloy B2 is a nickel base wrought alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures.

Hastelloy C-2000 Fastener, also known by many as Alloy C-2000, is a versatile nickel-chromium-molybdenum alloy with excellent resistance to stress corrosion cracking and pitting corrosion. The C-2000 fastener (UNS N06200) is unique among other Hastelloy alloys with approximately 1.6% copper added to its chemical composition. These properties make them ideal for applications such as heat exchangers and industrial reactors.

This nickel steel alloy can be used in the as-welded condition because it resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications.Nickel Pipe is a metal pipe that is made up of an alloy that has primarily nickel and other elements in its composition.

Hastelloy C276 bushings are widely used in the harshest environments such as chemical processing, pollution control, pulp and paper, industrial and municipal waste treatment, and recovery of sour natural gas.

Hastelloy c-22 and c-276 are the only materials resistant to corrosion in wet chlorine, hypochlorite, and chlorine dioxide solutions, with significant resistance to high chloride solutions such as ferric and cupric chlorides. Corrosion resistance.

The alloy is forged between 2250/1750oF (1230/955oC) and then soaked at the forging temperature for 30 minutes per inch of billet or ingot section thickness. Forging should begin immediately, the billet is removed from the reheat furnace, a 25/40% reduction helps retain as much internal heat as possible. For optimum corrosion resistance, forged parts should be subsequently annealed. See Heat Treatment.

Hastelloy C-263, is an age hardenable nickel-cobalt-chromium-molybdenum alloy.Hastelloy? 2 C-263 has some very positive attributes that make it ideal for a wide range of applications. HAYNES? 263 alloy combines properties which make it suitable for a variety of fabricated component applications in both aircraft turbine engine and industrial turbine applications.

Hastelloy B2 studs have poor corrosion resistance to oxidizing environments and are therefore not recommended for use in oxidizing media or in the presence of iron or copper salts as they may cause rapid premature corrosion failure.

Hastelloy B3 Spacer Flanges does not rust, because of the interaction between its alloying elements and the environment.

Alloy X pipe bend offers exceptional performance in furnace rolls or other industrial furnace applications because of the alloy’s strong resistance to oxidizing, reducing and neutral atmospheres.

La aleacion tambien es resistente a soluciones y compuestos de cloruro, muchos de los cuales son altamente corrosivos. Por ejemplo, los reductores de aleacion de niquel C276 son resistentes no solo a los medios organicos e inorganicos termicamente contaminados, sino tambien a los cloruros ferricos y c¨²pricos, asi como al cloro, el agua de mar y la salmuera.

Hastelloy fasteners can be used in applications involving a wide range of media, including reducing acids and oxidizing agents. As the most versatile alloy c276 fastener, it is most commonly used for bolting of all Hastelloy grade fasteners.

Like many other nickel alloys, it is ductile and easy to form and weld. This alloy is used in most industrial environments where corrosive chemical environments exist and other alloys fail.

Alloy C276 Forged Flange Hastelloy C276 Flanges are made up of the nickel chromium molybdenum alloy that is called hastelloy. The composition includes 50.99% nickel, 14.5% chromium, 15% molybdenum and carbon, manganese, silicon, sulfur, cobalt, iron and phosphorus in it. The Hastelloy C276 Flanges have high melting point of 1370 degrees Celsius. This high melting point allows for higher operating temperatures of the flanges. The material also has 790MPa minimum tensile strength and 355MPa minimum yield strength.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

This nickel alloy has excellent resistance to hydrochloric acid at all concentrations and temperatures.

Hastelloy C276 Fastener is a wrought corrosion resistant alloy that resists the development of grain boundary precipitates that reduce corrosion resistance. C276 alloy fasteners have good machinability and are used for desulfurization of flue gas equipment and chemical process equipment. Hastelloy C276 bolts are commonly used to hold materials or objects together, or to position objects. A fastener that usually consists of a head on one end and a chamfer on the other. It is typically used in solution treated condition and soaked at 1121¡ãC (2050¡ãF) and then flash quenched.