2 inch ASTM A815 UNS S32750 Cap round pipe cap fitting

Their ability to handle toxic waste and hazardous chemicals and harsh agents without corrosion makes duplex steel pipe fittings attractive in a variety of applications such as flue gas desulfurization, chemical processing plants, and more. Although duplex alloys are suitable for high temperature processes, A815 UNS S31803 tee is generally not recommended because the alloy becomes brittle at temperatures above 600¡ãF.

These stainless steel 310S butt welded pipe fittings are used in a variety of applications such as oven fixtures, furnace parts, heat treating chambers, hydrogenation parts, jetting parts, and more. These SS 310S butt weld fittings are also primarily used in the chemical, construction and plumbing industries.

Monel 400? has low corrosion rate in flowing seawater, therefore it is widely used in marine applications.We make use of the best manufacturing techniques for their production so that the final product being served to the customers is the best of best.

HT PIPE is an approved manufacturer of Concentric and eccentric reducers, equal and reducing tees, 45¡ã and 90¡ã elbows, caps and stub ends & all part of the comprehensive range of Butt weld fittings to requirements of BVIS, IBR, BARC, DNV, BHEL & we are ISO 9001:2008, 14001:2004, OHSAS 18001:2007 certified company.

Often the angle of elbow is 90 degrees but there are different types of elbows with different angles as well. The Carbon steel welded pipe fittings are also one of the cost efficient methods to apply with other types of steel.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Type 316 steel is an austenitic chromium-nickel stainless steel that contains between two and 3% molybdenum.

B16.11 Forged Fittings, Socket-Welding and Threaded ASTM B366 specification covers Inconel, Monel, Hastelloy and Nickel Alloy Pipe Fittings used in acidic and sea water.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

C-22 is a great alternative when superaustenitic stainless steels (AL-6XN, 904L, and 254 SMO) and duplex stainless steels (2205 and 2507) will not withstand extremely aggressive media. This is because it is a nickel-chromium-molybdenum-tungsten alloy with better overall resistance to uniform and localized corrosion than any other Ni-Cr-Mo alloy, like Hastelloy C-276, C-4, and alloy 625.

Versatility and ingenuity, our UNS S31008 SS 310S fittings are easy to install and remove for oxidation and low temperature use in the textile, metal and wood cutting and CNC milling industries. Essential to operations in the food, beverage, pharmaceutical and dairy industries, our DIN 1.4845 elbows offer good machinability and processability.

304 and 304L are austenitic alloys, which means that a nonmagnetic solid solution of ferric carbide or carbon in iron is used in giving this stainless steel its corrosion-resistant properties.

Duplex stainless steels are a family of stainless steels. These are called duplex (or austenitic-ferritic) grades because their metallurgical structure consists of two phases, austenite (face-centered cubic lattice) and ferrite (body centered cubic lattice) in roughly equal proportions. They are designed to provide better corrosion resistance, particularly chloride stress corrosion and chloride pitting corrosion, and higher strength than standard austenitic stainless steels such as Type 304 or 316.

The fittings made up of carbon steel are applied through various industrial, commercial and domestic applications.

The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated.

Inconel 600 and Inconel 601 are very common superalloys. Both alloys have good high temperature properties. Among them, Inconel 601 adds more chromium on the basis of Inconel 600, so the main difference between them is the difference in antioxidant properties.

Incoloy 800 Welded Butt Welded Fittings also contain 1.50% manganese, 1% silicon and up to 0.75% copper. Incoloy Alloy 800HT 180 degree bend has excellent corrosion resistance to stress corrosion cracking. Typically, these Incoloy UNS N08800 seamless pipe fittings are heated in the temperature range of 648 degrees Celsius to 760 degrees Celsius.

Our reducers have high strength and corrosion resistance and are suitable for various industries.

ASTM A403 WP317 Pipe Fittings?could be a altered adaptation of?Stainless Steel 317L Pipe Fittings.

316 stainless steel pipe is the second most common stainless steel after 304. SS DIN 1.4401 / 1.4436 Rectangular Welded Pipe, ASTM A312 TP316 Pipe, 316 Rectangular Pipe, 316 Pipe typically contain 16% Chromium and 10% Nickel with added Molybdenum typically between 2-3%.

800H can resist corrosion of many corrosive media. Its high nickel content makes it resistant to stress corrosion cracking in aqueous corrosion conditions. The high chromium content provides better resistance to pitting and crevice corrosion cracking. The alloy has good corrosion resistance to nitric acid and organic acids, but limited corrosion resistance in sulfuric acid and hydrochloric acid. Good corrosion resistance in oxidizing and non-oxidizing salts, in addition to the potential for pitting corrosion in halides. It also has good corrosion resistance in water, steam and mixtures of steam, air and carbon dioxide.

Grade 316 pipe bend is relatively easy to machine, although more difficult than carbon steel. More power is required to machine grade 316. Cutting speed should be lower, the feed higher, tooling and equipment heavier.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Large selection of finished and semi-finished stainless steel caps/end caps, crosses, elbows, reducers, tees, stub ends and many other stainless steel butt weld fittings for use in power plants, oil and gas, water treatment, food processing , petrochemical, LNG industry, automotive, heavy engineering, offshore and chemical. We can supply butt welded pipe fittings individually or in conjunction with our other plumbing products.

Meanwhile, these Duplex Steel S32205 Cross Pipe Fittings are also available to our customers in different sizes and shapes. Duplex steel S31803 bent butt welded pipe fittings generally perform well in environments that cause premature failure of austenitic grades. Although duplex steel S32205 short end butt welded pipe fittings have good high temperature oxidation resistance, this grade – like other duplex stainless steels – can experience embrittlement if held at temperatures above 300 degrees Celsius for even short periods of time. If embrittled, duplex S31803 end caps can only be corrected by full solution annealing. Duplex S32205 Disc Lid Fittings are almost never used above 300 degrees Celsius.

The most common dimensional standard for 45 degree carbon steel is SME B16.9, B16.28 MSS-SP43/75 for sizes ranging from ?¡± to 72¡å (in all Schedules).

Monelk500, also known as UNS N05500, has the same corrosion resistance as monel400, but has higher mechanical strength and hardness. It has good corrosion resistance and long-term organizational stability.

Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers higher creep, stress to rupture and tensile strength at elevated temperatures.

There are seamless and welded A234 WP9 pipe fittings,the seamless A234 WP9 pipe fittings are manufactured from seamless steel pipes A335 P9,welded A234 WP9 pipe fittings mean they are made from welded pipes or steel plates.Studying the market demands, we deliver quality products that are sustainable. Our products are 100% certified.

The ASTM A403 WP316L grade is a wrought carbon grade that possesses excellent toughness and offers higher creep and stress rupture properties.