2 inch pipe flange astm a266 gr.4 steel flange fitting

UNS S32205 Duplex Steel ASME SA182 Butt Weld Flanges are suitable for seawater and power generation equipment because their smooth surfaces can withstand temperatures up to 600¡ãF, while also having excellent flow characteristics.

Duplex steel flanges are widely used in the used engineering, machinery and automotive industries. Duplex Steel S31803 Lap Flanges are ideal for applications requiring better corrosion resistance than Type 316 and good high temperature strength. We have Duplex Steel S31803 / S32205 Flanges in stock. Duplex steel flanges are commonly used in chemical, petrochemical, and power industries.

UNS S32750 Flanges are used in seawater piping, desalination plants, mechanical components, high-pressure RO plants, etc. SD pipe flanges are used in heat exchangers, service and process water systems, offshore platform, oil & gas industry, etc. These flanges are also found in line pipes, power industry FGD system, industrial & utility scrubber, absorber tower, pressure vessel, etc.

In comparison to SS316, Duplex 2205 has been tested under reverse bending stresses at room temperature. The results show that the fatigue limit/yield strength is about twice as high for Duplex 2205.

Double butt weld flanges are best suited for hazardous high pressure applications. Butt weld flanges are easily identified by their long tapered neck.

It also has excellent resistance to chloride stress corrosion cracking, low coefficient of thermal expansion and high thermal conductivity. Due to the low carbon content in the flange, there is minimal risk of carbide precipitation at grain boundaries during heat treatment.

Duplex stainless steel S31803/S32205/2205 flanges are supplied with good sulfide stress corrosion resistance, high strength and excellent impact toughness. These dual phase steel S31803 slip flanges are chemically balanced to produce a microstructure of approximately 50/50 ferrite to austenite ratio.

Compared with austenitic stainless steel, F51 duplex stainless steel has twice the compressive strength, and compared with 316L and 317L, the designer can reduce its weight.

All 2205 alloys are metallographically inspected to ensure that products shipped are free of harmful phases such as sigma. It is usually used in the form of welded pipes or tubular parts. The alloy is also used as formed and welded sheet products in environments that are resistant to general corrosion and chloride stress corrosion cracking.

ASTM A182 F53 Super Duplex Flanges available with rating class of 150#, 300#, 400#, 600#, 900# and 1500# in sizes NPS 1/2 to 24.

Duplex 2205 is a nitrogen enhanced duplex stainless steel designed to solve common corrosion problems encountered with 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic (such as 304 stainless steel) nor purely ferritic (such as 430 stainless steel). The structure of 2205 duplex stainless steel consists of a pool of austenite surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. 2205 is often referred to as the workhorse grade and is the most widely used grade in the duplex stainless steel family.

This category of material includes grades 2205, F51, F53, and F60. Duplex stainless has increased in popularity over the years due to its excellent chemical and mechanical properties versus their basic stainless counterparts, given especially that the cost differences are minimal now as the availability has increased.

Austenitic-ferritic stainless steel variants have higher resistance to stress corrosion cracking, but lower toughness and impact strength than ordinary austenitic 304 and 316 stainless steels. Such materials include grades 2205, F51, F53 and F60. Duplex stainless steels have grown in popularity over the years due to their excellent chemical and mechanical properties, and compared to basic stainless steels, especially given the increased availability, the cost difference is now small.

Butt weld flanges are flanges designed to be connected to piping systems by butt welding. This type of flange comes in a wide range of sizes, butt weld flanges are expensive due to their long necks and the cost of personnel to contact the WN flange with the pipe or fitting, but are preferred for high stress applications. The neck or hub transfers the stress to the pipe.

Other applications for 2205 flanges include use in marine and other high chloride environments, biofuel plants, pulp and paper industry – digesters, bleaching equipment, stock handling systems, and food processing equipment. Major industries using these Duplex 2205 flanges include asphalt upgrading plants, nuclear power (mostly seamless), heavy oil refineries, and petrochemicals and acids.

Super Duplex Flanges use pure quality alloys with mixed austenitic and ferritic microstructures and high molybdenum and chromium content. This superior chemical composition provides superior resistance and increased strength. The products we manufacture are used in a wide variety of applications and industries. These flanges are highly resistant in corrosive, acidic and reducing environments.

Compared to similar ferritic and austenitic grades, the super duplex steel 1.4410 flange has a lower alloying cost and, due to the well improved yield and tensile strength, has Corrosion resistance.

Duplex steel sliding raised face flanges have high corrosion resistance in chloride-containing media, including seawater, making this grade ideal for deepwater umbilicals and a range of other oil and gas applications.

Super Duplex Flanges are highly weldable. This alloy can be easily welded by various welding operations. These super duplex flanges are known for their high fatigue strength and provide high strength at moderate temperatures in the lower temperature range.

The flanges are internally drilled to match the inside diameter of the pipe to ensure unrestricted flow and prevent turbulence at the joint. The tapered neck provides thicker metal at the flange joint, while the neck tapers to butt against the pipe and to butt against the pipe. This design helps transfer stress from the flange to the pipe and reduces stress concentrations at the bottom of the flange connection.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The applications include high corrosive applications including acidic applications due to the material composition.

These high-strength flanges securely seal a range of plumbing modules. The multifunctional flange shows good stability and exhibits enhanced resistance to chloride pitting in marine applications. With standard welding procedures, Super Duplex Flanges can be easily welded to different piping modules.

Robust modules resist acid pitting in marine systems. Duplex flanges effectively connect different piping modules in the system and affect the flow of fluids or gases. This grade has higher strength and crack resistance than common austenitic grades. These flanges also have excellent ductility and can be welded in place using standard procedures.

Due to the material composition, the strength and the corrosion resistance, these flanges are used in a variety of applications.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Duplex 2205 flanges are made from an austenitic-ferritic stainless steel, which was designed to deliver higher strength and corrosion resistance than 300 series stainless steels.

The duplex structure results in improved stress-corrosion cracking resistance, compared with the austenitic stainless steels, and improved toughness and ductility, compared with the ferritic stainless steels.

This provides the flanges with high corrosion resistance and higher mechanical properties. Please contact us for your orders of F53 flanges.

This is designed to be connected to the piping system by butt welding. It is relatively expensive due to its long neck, but is preferred for high stress applications. The neck or hub transfers stress to the bottom of the hub to the wall thickness at the butt weld, providing significant reinforcement for the flange. Flange holes match pipe holes to reduce turbulence and erosion.

To increase the connection surface, dual phase steel S31803/S32205 RTJ flanges are used. It is applied in pairs in two halves. We also offer other types such as 2205 Double Butt Weld Flanges.

Duplex steel butt welding flange forgings are difficult to form due to their high strength and work hardening rate. However, due to the presence of a large amount of stainless steel, the flange is highly resistant to seawater-related corrosion.