2 inch sch40 304 316 904l stainless steel butt weld elbow

ASTM A234 WP91 is low content alloy steel,so its hardness is higher than carbon steel,so its have better performance for the abrasive resistance and corrosion resistence.So the ASTM A234 WP91 pipe fitting is more widely used for the machine parts compared with carbon steel.

For the seamless steel pipe fittings refers to the fittings raw material from the seamless steel pipes and tubes. Thus the welded steel pipe fittings covers the fittings raw material from welded steel pipes.

Due to the addition of chromium, UNS N08800 butt weld elbows are resistant to oxidizing media such as nitric acid, salts and nitrates. These nickel alloy 800HT elbows can withstand high temperature environments and have a good surface finish.

The ASTM A403 WP316L grade is a wrought carbon grade that possesses excellent toughness and offers higher creep and stress rupture properties.

Type 317L is a molybdenum-containing austenitic stainless steel intended to provide improved corrosion resistance relative to Type 316L in highly corrosive process environments, particularly those containing chlorides or other halides. The low carbon permits Type 317L to be welded without sensitization to intergranular corrosion resulting from chromium carbide precipitation in the grain boundaries. Type 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.

They can also be seamless in nature. The nominal diameter of the seamless fittings ranges from ? inches to 24 inches and the welded fittings range from ? inches to 120 inches in diameter.

Our ASTM A815 Duplex Steel UNS S32205 Caps are available in a variety of cap shapes, diameters and thread types and are resistant to many industrial acids and seawater.

Stainless Steel 316 has excellent forming and welding characteristics.

Alloy 800H/800HT is frequently used in applications that involve long-term exposure to elevated temperatures where resistance to oxidation, carburization and other types of elevated temperature corrosion is required.

Copper-nickel (Cu-Ni) piping systems are components that connect copper-nickel pipes, copper-nickel fittings, copper-nickel flanges, and valves that process seawater treatment systems.

Stainless steel 304 elbows are made of high grade stainless steel to help withstand fluid pressures at moderate and high temperatures. We are one of the top manufacturers of ASTM A403 WP 304 Stainless Steel Long Radius Elbows, covering the standard for forged austenitic stainless steel fittings for a variety of pressure applications.

Duplex UNS S32205 alloy is equally ferritic and austenitic in nature, and hence a widely used grade of Stainless Steel. UNS S32205 consist of 22% Cr and 3% Mo, 5 to 6% Ni alloyed stainless steel.

These ASTM A234 WP9 Buttweld Fittings is use in various industries like : Alloy Steel WP9 Buttweld Pipe Fitting uses in Oil and Gas Pipeline.A234 WP9 Contains 0.15% – carbon, 0.3 to 0.6% – Manganese, 8 – 10% Cromium, 0.3% max phosphorus and sulfur.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

304, 310, 316, 321 stainless steel equal tee pipe, also known as return elbows, functioning to change the direction of flow at a equal tee pipe. The most common dimensional standard for stainless steel equal tee is SME B16.9, B16.28 MSS-SP43/75 for sizes ranging from ?¡± to 72¡å (in all Schedules).

The alloy has great mechanical properties at subzero temperatures, and with a melting point of 2370¡ã ¨C 2460¡ã F, products can be used at temperatures up to 1000¡ã C.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

Monel 400 provide superior quality for different types of mechanical, and general engineering applications.

The fittings can also come with different types of surface treatments such as the rust-proof black oil or hot galvanized and transparent oil treated.The raw material for making ASTM A234 fittings hall be fully killed, consisting of forgings, bars, plates, sheet, and seamless or fusion-welded pipe products with filler metal added and shall conform to the chemical requirements of Table 1.

WPHY 52 chemical composition includes metals like Manganese, aluminium, phosphorus, sulphur, vanadium, silicon, nickel, titanium, chromium, molybdenum and copper.A few other moved forward ASTM A860 WPHY 52 properties are its expanded solidness, expanded sturdiness, moved forward weldability, great resistance to hydrogen stretch breaking and its exact measurement.

Hastelloy B3 pipe fittings is a Nickel, Molybdenum, and Chromium alloy which has excellent resistance to pitting, corrosion, stress-corrosion cracking plus and thermal stability superior. Alloy B3 exhibits excellent resistance to sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media.

These alloys can function at very high temperatures and in severe mechanical stress environments, and also where high surface stability is required. They have high creep and oxidation resistance.

Monel K500 pipe bend and elbow are resistant to a sour-gas environment

Modern processing systems are often a complex network of turns, elevation changes, fittings, and more.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A403 Gr WP316 standard are ideal for pressure piping applications. It defines all the seamless and welded pipe fittings made with 316 grade stainless steel.

Seamless Butt Weld Fittings: 1/2¡å ¨C 10¡å, Welded Butt Weld Fittings: 1/2¡å ¨C 48¡å

ASTM A234 WPB Fittings are made up of different material grades.ASTM A234 WPB WPC WP5 WP9 WP11 WP22 Fittings Specification
ASTM A234 (ASME SA234) is standard specification of carbon and alloy steel pipe fittings for moderate and high temperature services.