2 inch sch40 304 316 904l stainless steel butt weld elbow reducer tee pipe fitting

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

ASTM A105 (also known as ASME SA 105) covers seamless forged carbon steel piping components for use in pressure systems at ambient and high-temperature service.

Heat treatment services for stainless steel and metal alloys
Solution annealing (also referred to as solution treating) is a common heat-treatment process for many different families of metals. Stainless steels, aluminum alloys, nickel-based superalloys, titanium alloys, and some copper-based alloys all may require solution annealing.

These alloys are widely used in chemical processing, pollution control, evaporator, nuclear reactors, marine industries, and so on.

Hastelloy C276 is one of the few materials that can withstand the corrosive effects of wet chlorine, hypochlorite and chlorine dioxide.

Alloy 600’s high chromium content makes it significantly more resistant to oxidation than pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy has a high level of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.

INCONEL alloy 625 is designated as UNS N06625, Werkstoff Number 2.4856 and ISO NW6625 and is listed in NACE MR-01- 75.

With the specification acting as a guide, it is required that the material follow some requirements. Along with the tensile and yield strength, the ASTM A105 Elbow must adhere to the requirements of the specification for details such as reduction of area, elongation, and hardness requirements.

You source everything directly from manufacturers and shareholders! The average daily sales volume of stainless steel pipes in our inventory is about 40 tons. We believe in offering our clients substantial discounts and work closely with them on all their project requirements. We always offer the most competitive stainless steel 90 degree elbow prices to potential and existing customers.

Stainless steel has been in use for more than one hundred years.

A steel nipple fitting is a straight length of pipe with external threads on both ends. It is one of the most popular categories of pipe fittings. It is a connector or coupling with threads on both ends. Fittings are used to connect pipes to water heaters or other pipes.

The length of the pipe nipple is usually specified by the overall length with threads. It may have a hexagonal section in the center for the wrench to grasp (sometimes referred to as a ¡°hex nipple¡±), or it may simply be made from a short piece of pipe (sometimes referred to as a ¡°barrel nipple¡± or ¡°pipe nipple¡±).

The use of branch fittings instead of conventional fittings (buttweld tee, reinforcing pads and saddles) has the following advantages (example Weldolet):

Just 2 welds are needed, instead of 3 (less work and weld inspections)
Accelerated installation time
Less space is required, making the piping system design more flexible
The flow is fully unrestricted, due to the funnel design

It has excellent solderability and can withstand very high pressure and weight. The alloy has excellent mechanical properties at sub-zero temperatures, with a melting point of 2370¡ã – 2460¡ã F, and the product can be used at temperatures up to 1000¡ã C.

Stainless threaded caps are cast from high quality 304/304L/316/316L stainless steel and have female threaded cap ports.

Stainless steel threaded pipe caps cover pipe ends, stop fluid flow and protect pipe threads. These stainless steel caps are commonly used to direct flow to a specific end in a multi-end fitting, and stainless steel cap types include hexagonal and round caps.

Most iron-based metals react with water to produce the reddish iron oxide known better as rust. The oxygen atoms in the water pulls iron off of the base metal to form the porous rust structure with no real strength.

Apart from this, they can be easily elongated by 30% and still possess excellent workability.

To recover the inherent corrosion resistance of stainless steel castings. The corrosion resistance of stainless steel decreases after investment casting. The corrosion resistance of stainless steel castings recovered to the optimum state after solution treatment.

Inconel is a superalloy made with high concentrations of nickel, chromium, and molybdenum.

If hardened Monel 400 is the goal, cold working with a soft tooling material is the only option. By cold working, mechanical stress is used instead of heat to change the shape of the metal.

A182-F11 has high thermal strength (¦Äb¡Ý440MPa) and oxidation resistance at high temperature, and has certain resistance to hydrogen corrosion.

Flanges, fittings, valves and various other parts ordered to customer dimension or to industry standards such as MSS, ASME and API specification are included in the scope.

Stainless Steel Forged Screwed-Threaded Union Suppliers, ASME B16.5/ B16.9/ B16.11/ B16.36/ B16.25/ B16.49 Stainless Fittings, ASTM A182 Forged Screwed-Threaded Union, threaded pipe fittings & socket weld pipe fittings manufacturers

Incoloy 800 may be also used for applications such as wet scrubbing, and the reactive atmospheres of furnaces as well as in industries like nuclear fuel.

Alloy 400 is virtually immune to chloride stress corrosion cracking in typical environments. Generally, its corrosion resistance is good in reducing environment, but poor in oxidizing environment.

Alloy 600 is not an age hardening alloy; cold working is the only hardening method available.

Bushings are similar to thin tubes most commonly used in machinery with rotating or sliding shafts to increase efficiency and reduce vibration and noise. Bushings can be used for drilling operations in drill stands, hydraulic external gear pumps and motors.

A105 shall be subjected to heat treatment (annealing, normalizing, tempering, or quenching). A105 shall conform to carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium contents.

ASTM A105 (also known as ASME SA 105) covers seamless forged carbon steel piping components for use in pressure systems at ambient and high-temperature service.

Tee is also known as pipe fitting tee or tee pipe fitting, tee joint, etc. Used mainly to change the direction of the fluid, used in the main pipe to branch pipe.

Annealing softening begins at approximately 1600¡ãF (871¡ãC) and is fairly complete after 10 to 15 minutes of heating at 1800¡ãF (982¡ãC). Above this temperature, grain growth can be objectionable, although very brief heating at 1900¡ãF will result in complete softening without excessive grain growth. Since the cooling rate has no effect on softening, the material can be water quenched or air cooled.