2 inch stainless steel pipe fittings best tee in China

ASTM A403 WP317L is a molybdenum bearing, low carbon content “L” grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes.

SS UNS S30400 Butt Weld Pipe Elbow execute excellent forming and welding properties.ASTM A403 WP304 Fittings covers the standard for created austenitic stainless steel fittings for pressure piping applications.

Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee (Tee reducer), both are used to divide (combine) the pipelines to adjust the flow rate and change the direction.

The most common dimensional standard for 45 degree carbon steel is SME B16.9, B16.28 MSS-SP43/75 for sizes ranging from ?¡± to 72¡å (in all Schedules).

Our Alloy Steel A234 WP9 Pipe Elbow are available in a number of pipe end connections, like threaded, bevelled, square, grooved, bent, barbed and seamless and in a variety of wall thickness.The salts in Alloy Steel WP9 Pipe Reducer may create when hydrochloric acid interacts with iron and copper.

This material should be arranged the charpy V impact test in temperature of -46¡æ, to make sure it can work in a lower temperature service, for example in cold weather, winter or deep-sea water offshore projects.

Incoloy 800H tees are widely used in chemical plants and seawater applications. We specialize in manufacturing high quality products that will pass all required certifications. Our main goal is to meet the needs and requirements of our customers in obtaining the best fittings.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

The ends may be machined for butt welding, threaded, or socketed. When the ends differ in size, it is known as a reducing elbow. Another key characteristic of sanitary elbow fittings is in the name ¡ª they¡¯re sanitary.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Sanitary Weld Elbows are perfect for permanent assembly on processing systems that require a change of fluid direction. These fittings require robust welding for installation that offers high integrity and durability in applications that require longevity and cleaning in place (CIP).

Hastelloy B2 pipe bend provides resistance to pure sulfuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

A reduction in carbon content in any austenitic stainless steel alloy has proven to be detrimental to fittings. To solve this problem, manufacturers add some nitrogen to the alloy of UNS S31603 316L stainless steel fittings, making it mechanically similar to stainless steel alloy 316.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The high creep resistance and yield strength of Inconel 625 elbow make this superalloy a good choice for tubes, piping, and plant equipment that require welding.

Hastelloy C276 alloy, UNS N10276, 2.4819, is the most widely used and versatile corrosion resistant nickel alloy.

This fitting is used in piping systems to change direction or function and is mechanically connected to the system. The easiest way to do this is to bend the pipe in the desired direction, but this process will stretch and thin the outer wall of the pipe while thickening and wrinkling the inner wall of the pipe. Our 2205 line of duplex fittings includes long radius elbows and short radius elbows.

Inconel 600 and Inconel 601 are very common superalloys. Both alloys have good high temperature properties. Among them, Inconel 601 adds more chromium on the basis of Inconel 600, so the main difference between them is the difference in antioxidant properties.

253 MA Pipe Fittings are austenitic stainless steel nickel-chromium alloyed fitting adding with unusual earth metals and nitrogen. The fittings have superior oxidation resistance up to 1150 degree C and general corrosion resistance. It offers outstanding creep strength along with superior resistance to erosion and sulfidation at elevated temperature. Through the tight control of micro-alloy addition these demonstrate superior heat resistance properties. The fittings have superior ductility and maintain its good formability. The presence of nitrogen and chromium content possess resistance to pitting and stress corrosion cracking.

For high temperature applications, the high carbon variant 316H stainless steel and the stabilized grade 316Ti stainless steel should be used.

We manufacture Stainless steel 304/ 304L pipe fittings for end-users such as marine engineering, chemical processing, hydro-carbon processing, heat exchangers, valves and pumps. and ship worldwide.

316L elbow minimises harmful carbide precipitation due to welding.

As we know, ASTM A234 steel pipe fittings are used in pressure piping and in pressure vessel fabrication, for services at moderate and elevated temperatures. The fittings material in this standard consist of killed steel, forgings, bars, plates, seamless or fusion-welded tubular products with filler metal added.

Usage of Duplex 2507 should be limited to applications below 600¡ã F (316¡ã C). Extended elevated temperature exposure can reduce both the toughness and corrosion resistance of alloy 2507.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

Incoloy 800HT Buttweld Pipe Fittings play an important role where fluids are getting operated at high temperatures and extreme pressures. Pipe Fittings are mainly used in a piping system to change the flow. By using the types of buttweld fittings the industrial applications are working smoothly and performing the flow of fluids from one place to another

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

Stainless Steel 310S Butt Weld Fitting (UNS S31008) is a low carbon version of Stainless Steel 310 Butt Weld Fitting. We also offer these butt welded pipe fittings in custom forms based on size and shape. The high chromium and nickel content of stainless steel 310S stud end fittings maintains a greater percentage of room temperature strength than common austenitic alloys such as SS 304.