2 inch stainless steel pipe fittings best tee in China

C276 is suitable for off-shore applications where hydrogen-sulphide stress corrosion cracking resistance is essential.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

2205 is a standard duplex steel with 21% chromium. The material is strong, twice as strong as austenitic steel types.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Grade 310 is a medium carbon austenitic stainless steel used in high temperature applications such as furnace components and heat treating equipment. It is used in continuous operation up to 1150¡ãC and intermittent operation at 1035¡ãC. The 310S grade is a low carbon version of the 310 grade. 310 stainless steel has good oxidation resistance and can be used continuously at temperatures up to 1140oC in the absence of reducing sulfur gases. With its high chromium content, 310 stainless steel has good corrosion resistance for improved high temperature performance.

Duplex fittings have medium performance. However, the mechanical properties of duplex steels are much higher compared to austenitic alloys such as 304. What makes this material a cost-effective alternative is that the nickel content that manufacturers use to produce dual-phase steel butt-welded pipe fittings is lower than that of super-duplex steel.

Please make sure to contact us for more information on the pipe fitting products such as the ASTM A860 MSS SP 75 WPHY 52 Pipe Fittings and their pricing.

HT PIPE offers a range of precision finished duplex fittings & flanges to ensure a good flow in seamless. Our flanges are corrosion resistant & designed to operate in high pressure environments. Here at HT PIPE we supply a broad range of piping products and materials which are used in many different industries.

Stainless steel 317 has high corrosion resistance. It is a molybdenum-containing austenitic stainless steel under this grade. Stainless steel 317 Socketweld union improves resistance to chemical attack. These sub-grade 317 fittings are low in carbon to provide resistance to sensitization during welding and other hot working processes.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

We can produce high quality stainless steel elbow Duplex stainless steel UNS S32750 elbow 90deg super duplex stainless steel UNS S32750 elbow 45deg super duplex stainless steel UNS S32750 elbow Long Radius super duplex stainless steel UNS S32750 elbow Short Radius super duplex stainless steel UNS S32750 elbow

A403 wp304 Tee is a T-shaped fitting with two outlets connected at 90 degrees to the main line. At right angles to lines, used to connect pipes and pipes.

In the annealed condition, stainless steel 317L fittings are non-magnetic. Although fittings manufactured from Grade 317L cannot be hardened by heat treatment, the material will harden by cold working. 317L fittings can be easily welded and machined by traditional shop fabrication methods. No post weld heat treatment is required for these fittings. Generally, grade 317 stainless steel can be welded using fusion welding and resistance welding methods, but for these 317L stainless steel fittings, oxyacetylene welding is not the preferred method. For best results, use 317L filler metal or AWS E/ER317 or .

316L is popular for pharmaceutical and photography equipment because it can withstand welding and corrosive chemicals.

Astm b366 incoloy 800ht butt welded pipe fittings have some chemical compositions such as chromium, nickel and iron. Our butt welded pipe fittings provide increased creep and stress rupture and high temperature corrosion resistance. These butt weld fittings are available in custom and standard forms. Astm b366 incoloy 800ht butt welding fittings manufacturing process to ensure top quality.

AMS 5754 pipe bend has no yield or tensile strength requirements, but it does require a hardness maximum and stress rupture minimums.

Titanium behaves as an inert element in the presence of oxygen and water, which means it does not react with oxygen and water at ambient temperature conditions.

Alloy 825 fittings are manufactured like other nickel-based alloys. This means that the material used to manufacture Incoloy 825 elbows is easily formed and welded by a variety of techniques. For example, according to ASTM B366, the list of forging or forming operations includes hammering, piercing, upsetting, rolling, extrusion, pressing, bending, and fusion welding. In addition to withstanding Incoloy 825 fittings for chemical and product analysis, specified fittings also need to meet chemical requirements. Typical applications for Incoloy 825 fittings include their applications in air pollution control, chemical and petrochemical, food processing, petroleum refining, ore processing, steel pickling and waste processing industries, nuclear industry, and offshore oil and gas production.

Duplex 2205 fittings must be cooled to room temperature as soon as possible after being processed by thermoforming. This is what has to be done in order to avoid precipitation of intermetallic or especially so-called sigma phases. The presence of this sigma phase in UNS S31803 dual-phase steel elbows is detrimental to the alloy because, in addition to the corrosion resistance of the material, it greatly reduces properties such as impact resistance at room temperature.

Stainless Grade 347 | UNS# S34700 is a stabilized austenitic stainless steel very similar to Grade/Alloy 304, containing niobium and tantalum. To avoid chromium carbide precipitation, columbium is used for stabilization.

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

we are traders of we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

A standard AMS 5666 or UNS N06625 variant of Inconel 625 may contain 58% nickel, 22% chromium, and 3.5% niobium.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Welded A234 WPB pipe fittings mean the large sizes fittings which are pieces welded from steel plates.

ASTM A234 WPB short radius in accordance with ASME B16.9.Carbon steel pipe fittings manufactured to ASMT A234 are usually furnished in the butt-welding form in accordance with ASME B16.9 or ASME B16.49.

Stainless steel ASTM A403 WP316L fittings can be annealed and hardened by a cold working process. Stainless Steel ASTM A403 WP316L Fittings can withstand service containing nitric and phosphoric acids and the resulting oxidation.

For maximum strength alloy 617 (ERNiCrCoMo-1) bare wire or 117 (ENiCrCoMo-1) covered electrodes are suggested.

Monel K500 pipe bend and elbow are usually used in propeller, pump shafts, pumps, valves used in the manufacture of perchlorethylene, and chlorinated plastics.