2 inch stainless steel pipe fittings plumbing pipe fittings sockolets

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Little or no corrosion occurs in dry gases such as chlorine or hydrogen chloride at room temperature and high temperature. At temperatures up to 550C in these media, this alloy has proven to be one of the most corrosion resistant common alloys.

Tee is also known as pipe fitting tee or tee pipe fitting, tee joint, etc. Used mainly to change the direction of the fluid, used in the main pipe to branch pipe.

Hence, materials with low carbon content such as ASTM A105 Fittings are not recommended to be used in those applications which have the need to be constantly exposed to a range temperatures above this value.

A105 is American ASTM standard number,¡±A¡± stands for common carbon structural steel.ASTM A105 is the most common carbon steel material under ASME/ANSI/API/MSS standard.It¡¯s standard specification for carbon steel forgings for piping applications.

Hastelloy C276 is resistant to localized corrosion such as pitting and stress corrosion cracking.

Cupro Nickel Forged forgings are annealed at temperatures between 593 and 816 degrees Celsius (1100 and 1500 degrees Fahrenheit). Copper-nickel forged threaded crosses are still widely used in modern shipbuilding.

Cooling units in many desalination plants and power plants use seawater to keep equipment cool, but salt water is a problem and can cause corrosion in pipes. This can be solved using ASTM B171 Copper Nickel Forged Fittings which are environmentally friendly and easy to assemble without any threaded or bolted connections and no corrosion in the pipe.

In the piping system, stainless steel 304 elbow is a pipe fitting that changes the direction of the pipeline. The chemical composition contained in the stainless steel elbow will keep the surface of the elbow free from rust and corrosion for a long time. According to the angle, the most commonly used are 45¡ã and 90¡ã180¡ã. In addition, according to engineering needs, other abnormal angle elbows such as 60¡ã are also included.

Inconel is a superalloy made with high concentrations of nickel, chromium, and molybdenum.

a105 is also a material code, belongs to the special steel, is a cold forged steel. The a105 is a mild steel forgings similar to the 20 steel.

A?threadolet?is the same basic design as a “weldolet.” However the main difference is the fitting has a female threaded connection to mate to the branch connection. This makes a 90¡ã branch and comes in full size or reducing for a straight piece of pipe.

In simple terms, a steel pipe elbow is a pipe fitting connected between two pipes. The main purpose is to change direction. As we all know, steel pipe elbows can be divided into different degrees, generally there are 45-degree steel pipe elbows, 90-degree steel pipe elbows and 180-degree steel pipe elbows. Other angles such as 60¡ã or 120¡ã are also available for piping systems in case of special requirements.

The alloy is also resistant to ammonia-containing atmospheres as well as nitrogen and carburizing gases.

Since only one type of carbon steel forging is specified in this standard, a105 is considered a type of forging carbon steel grade.

ASTM A105, also known as carbon steel, is an iron-carbon alloy with an internal carbon content of nearly 2 percent.

Alloy 400 exhibits corrosion resistance to many reducing media.

At elevated temperatures it offers resistance to oxidation, carburization, and sulfidation along with rupture and creep strength.

Fittings are used to connect two or more lengths of pipe or to close pipe ends. Fittings can connect pipes in a straight line, change flow direction, increase or decrease flow, or close pipe ends to stop flow.

SS 304 Forged Tee provides better mechanical properties for connecting pipes to mains. A tee consists of an inlet and two outlets placed at right angles to each other. SS 304 Forged Cross is used where four pipes intersect. They either divide the process or merge the process.

We offer sockets, steel sockets, stainless steel sockets, nickel alloy sockets, copper alloy sockets, duplex steel, carbon steel sockets and alloy steel sockets.

Its typical corrosion applications include titanium dioxide production (chloride route), perchloroethylene synthesis, vinyl chloride monomer (VCM) and magnesium chloride. Alloy 600 is used in chemical and food processing, heat treatment, phenol condensers, soap making, vegetable and fatty acid containers, and more.

In addition to being reliable, it has a high tolerance capacity. Our Stainless Steel 304 Forged Fittings are produced using modern technology and high-quality raw materials that assure compliance with international standards.

The a105 is a mild steel forgings similar to the 20 steel.

A fitting or adapter is used in pipe systems to connect straight sections of pipe or tube, adapt to different sizes or shapes, and for other purposes such as regulating (or measuring) fluid flow.[1] These fittings are used in plumbing to manipulate the conveyance of water, gas, or liquid waste in domestic or commercial environments, within a system of pipes or tubes.

A182-F11 has good process performance and welding performance, and high durable strength at 500 ~ 550¡æ.

Socket Weld Elbow and Threaded Elbow Fitting is a fitting installed between two lengths of pipe or tubing allowing a change of direction, usually 180¡ã, 90¡ã or 45¡ã. Nickel Alloy Elbows are available in short and long radius types.

INCONEL alloy 625 is designated as UNS N06625, Werkstoff Number 2.4856 and ISO NW6625 and is listed in NACE MR-01- 75.

Grade F22 is a low alloy steel containing nominally 2.25% Chromium. The alloy is widely used in the oil patch wellhead applications for connectors, hangers and block valves. Hardness levels up to 22 HRC are approved to NACE MR0175. The grade is often used as the base metal for clad components.
If supplied to ASTM A182 in the normalised and tempered condition, the 0.2% Proof Stress minimum is 30 KSI.Grade 22 of the ASTM A182 alloy steel is a low-alloy steel that contains 2.25% chromium. Often used as base metal for clad components, the F22 is also used in the oil patch wellhead applications for products such as hangers, connectors, and block valves, among others.

SS 316 forged pipe fittings are used to bend flow and connect two pipes to each other at different angles. They must be designed in such a way that they do not cause cavitation and excessive pressure loss.

These ASTM A182 alloy steel F5 F9 F11 F12 F22 F91 pipe fittings are corrosion resistant. ASTM A182 alloy steel F5 F9 F11 F12 F22 F91 fittings also have high dimensional accuracy.