2 way elbows water pipe fittings fittings steel pipe fittings duplex S31803

ASTM A234 WPB Elbow is one of the most used forms of pipe fittings. An elbow is a connector shaped like an elbow and allows for directional transformation in fluid flow.

Stainless steel 304 fittings contain 18% – 20% chromium and 8% – 10.5% nickel. It is an austenitic stainless steel with lower electrical and thermal conductivity than carbon steel. It is a component that helps to change the direction of flow, such as tees and elbows.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content.

This grade of the fitting is used in constructions for use in pressure piping and pressure vessel service at low temperature. Also, this fitting is available in two types in welded and seamless.

Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee (Tee reducer), both are used to divide (combine) the pipelines to adjust the flow rate and change the direction.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

UNS S32205 Forged Socket Welded 90 Degree Elbow Fittings in-depth various programs with Oil & Gas, Refinery, Petrochemical, Chemical, Fertilizer, Power, Structural & Mechanical, Automotive, Bearing Programs.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

The 316 stainless steel reducer is good to be used in water, marine and sea water applications to reduce the size of a pipe line. The ASTM A403 Grade wp316 tee is used to divide or connect two pipes with another pipe. The 316 grade of steel is also used for fittings in food grade applications. The ASME SA 403 WP 316 Pipe Cap is a unique type of fitting in that it closes a pipeline rather than connecting two parts together.

304 has good oxidation resistance in intermittent duty up to 870¡ãC and continuous duty up to 925¡ãC. However, continuous use at 425-860¡ãC is not recommended. In this case, 304L is recommended because of its resistance to carbide precipitation.

The deformation activation energy is low during superplastic deformation, and the process may be controlled by diffusion.

Monel 400? has low corrosion rate in flowing seawater, therefore it is widely used in marine applications.We make use of the best manufacturing techniques for their production so that the final product being served to the customers is the best of best.

We are a manufacturer, supplier and exporter of Alloy Steel ASTM A234 WP22 Buttweld Fittings that form meaningful connections between multiple pipes of various sizes.

Type 317L is a molybdenum-containing austenitic stainless steel intended to provide improved corrosion resistance relative to Type 316L in highly corrosive process environments, particularly those containing chlorides or other halides. The low carbon permits Type 317L to be welded without sensitization to intergranular corrosion resulting from chromium carbide precipitation in the grain boundaries. Type 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.

HT PIPE is one of the leading manufacturers of different types of high-quality products, such as pipe fittings of different shapes, sizes, thicknesses, etc. On the other hand, we are also a major supplier and exporter of the popular product duplex steel UNS S31803 pipe fittings. Pipe fittings are manufactured to all national and international standards of our organization. There are many kinds of pipe fittings, which are widely used in piping systems for various purposes. They are both used to mount profiled pipes to each other. In this way, liquids, fluids, gases, etc. pass through the pipes without any leakage. Also, fittings come in many sizes, sizes, standards, alloys, grades, etc., but most importantly our Duplex 1.4462 fittings are the most demanded fittings on the market today and for many years.

Duplex Steel S31803 Elbow Butt Weld Fittings are stainless steel, a type of stainless steel designed to improve resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Duplex steel S31803 tee butt welded pipe fittings are often used in chemical process industries: such as sulfuric acid production, nitric acid process, phosphoric acid process, ethylene oxide, polypropylene production, PVC, equipment for handling organic and fatty acids, chemical storage and tankers, thermal switch, etc.

The microstructure of duplex stainless steels is split approximately 50:50 between austenite and ferrite, and the balance of these phases provides the following benefits: Higher strength, approximately twice that of Type 304 austenitic stainless steel . This results in a reduction in the thickness of the plates used in fabrication, resulting in reduced weight, which is of particular importance in structural applications such as pressure vessels, storage tanks and bridges, as well as good weldability of thick plates, good low temperature toughness, stress resistance Corrosion cracking is important in many applications including hot water tanks, processing plants, brewing tanks and desalination plants.

Both materials remain available, subject to commercial considerations, and certain specifications which restrict the service temperature of some grades of INCOLOY alloy 800H.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

ASTM A403 WP304 pipe fittings mean the pipe fittings which material is Wrought Austenitic Stainless grade A403 WP304,they are used for the pressure piping systems of moderate and high temperature services.ASTM A403 is the standard of pipe fittings material,it indicates the materials properties of different kinds of stainless steel,WP304 is one of the steel grade in this standard

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

Applications in the chemical process industry involving sulfuric, phosphoric, hydrochloric and acetic acid.

Type 317L is a molybdenum-containing austenitic stainless steel designed to provide better corrosion resistance than Type 316L in highly corrosive process environments, especially those containing chlorides or other halides. The low carbon content allows 317L to be welded without intergranular corrosion due to chromium carbide precipitation at grain boundaries. Type 317L is non-magnetic in the annealed state, but can be made slightly magnetic by soldering.

Incoloy 800 Welded Butt Welded Fittings also contain 1.50% manganese, 1% silicon and up to 0.75% copper. Incoloy Alloy 800HT 180 degree bend has excellent corrosion resistance to stress corrosion cracking. Typically, these Incoloy UNS N08800 seamless pipe fittings are heated in the temperature range of 648 degrees Celsius to 760 degrees Celsius.

HASTELLOY C-276 alloy is available in the form of plates, sheets, strips, billets, bars,
wires, pipes, tubes, and covered electrodes.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.
Teel Industry has grown in the past few decades and there are a variety of products available in the market. ASTM A815 UNS S32750 Pipe Fittings are one of those products and are available in various sizes, shapes, and dimensions. ASTM A815 UNS S32760 Pipe Fittings are designed to be resistant to corrosion and are said to have perfect weldability. These Super Duplex S32750 Buttweld Fittings are resistant to erosion corrosion and fatigue. They have a mixed microstructure of 50% austenitic and 50% ferrite.

Incoloy 800H Pipe Fittings (UNS N08810) is in fact an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength.

Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners.