2 way female elbow duplex pipe fittings S31803

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

C-22 is a great alternative when superaustenitic stainless steels (AL-6XN, 904L, and 254 SMO) and duplex stainless steels (2205 and 2507) will not withstand extremely aggressive media. This is because it is a nickel-chromium-molybdenum-tungsten alloy with better overall resistance to uniform and localized corrosion than any other Ni-Cr-Mo alloy, like Hastelloy C-276, C-4, and alloy 625.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A tee of 304 pipe fittings is the most common pipe fitting. It is available with all female thread sockets, all solvent weld sockets, or with opposed solvent weld sockets and a side outlet with female threads. When the size of the branch is same as header pipes, equal tee is used and when the branch size is less than that of header size, reduced tee will be used.

According to ASME Boiler and Pressure Vessel Code, ASTM A420 WPL6 is not permitted for use in the construction of power boiler.

Class designations are also utilized to indicate the nondestructive test method and extent of nondestructive examination. A general summary of the fitting classes applicable to all WP grades of stainless steel follows. There are no classes for the CR grades.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The outstanding oxidation resistance of HASTELLOY X pipe bend is illustrated below. Tests were conducted by exposing samples to dry air at 2000 Deg. F. and to dry air pressurized to 300 psi at 1750 Deg. F.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Super Duplex 2507 Industrial Pipe Fittings, S32750 Pipe Bend, ASME SA 815 S32750 LR Elbow, Super Duplex S32750 Seamless Butt weld Fittings, Super Duplex Steel 1.4410 Eccentric Reducer, Super Duplex S32750 Stub End, S32750 Super Duplex Steel Equal Tee, ANSI B16.9 Super Duplex S32750 Welded Pipe Fittings, SAF 2507 Pipe Fittings Manufacturer in China.

Stainless steel 347 reducer has tensile strength and minimum yield strength. Stainless Steel 347 Stub End Fittings are a non-magnetic grade that cannot be hardened by heat treatment, are typically used in the annealed condition, and are known for their ease of fabrication and formability.

Stainless steel tees are used to connect 3 pipes and join them into 1 to mix fluids. Whereas steel reducers are used to reduce the diameter of pipes. Stainless steel welded pipe fittings have a melting point of 1400 degrees Celsius and an operating temperature of 870 degrees Celsius.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Monel K500 pipe bend and elbow are usually used in propeller, pump shafts, pumps, valves used in the manufacture of perchlorethylene, and chlorinated plastics.

Stainless steel 316 pipe fittings are a product made of grade 316. It is also called marine grade. These UNS S31600 SS elbows are said to have better mechanical and corrosion resistance properties than other stainless steel grades. Although stainless steels are often referred to as austenitic steels, with nickel and chromium alloys SA403 WP316 SS Stub has molybdenum added to the ends to improve its resistance to pitting corrosion.

This protective layer enables titanium to become an excellent corrosion-resistant element¡ªalmost as effective as platinum. This property makes it resistant to even strong liquids such as sulfuric acid, moist chlorine gas, chloride solutions, hydrochloric acid, and most organic acids.

254 SMO is a high-alloy austenitic stainless steel developed for use in seawater and other corrosive chlorine-containing media. The steel has the following characteristics: excellent resistance to pitting and crevice corrosion, high resistance to general corrosion, high resistance to stress corrosion cracking, higher strength than conventional austenitic stainless steels, and good weldability.

We are a manufacturer, trader, stocker, supplier and exporter of a full range of Duplex Steel S31803, S32205 Pipe Fittings made of 50-50 Austenitic-Ferritic microstructure with excellent impact toughness and higher resistance to general corrosion.

Titanium behaves as an inert element in the presence of oxygen and water, which means it does not react with oxygen and water at ambient temperature conditions.

Carbon Steel Pipe Fittings are made up of carbon steel which has a limited range of ingredients in its composition. Carbon steels have high hardness and wear and tear properties.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
A stainless steel pipe system is the product of choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. As a result of the aesthetic properties of stainless steel, pipe is often use in architectural applications.

Alloy 600 / Inconel 600 is combination of Nickel Chromium and Iron providing a standard material for the chemical industry and the automotive engine, aero engine and airframe sectors.

Monel 400 is widely used in Feed water and steam generator tubing.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

ASTM A403 WP321 is one of the most common stainless steel pipe fittings material.(ASTM A403 WP321 Standard Specification)

Due to the lower carbon content in 317L fittings, the alloy can be welded without intergranular corrosion. Generally, intergranular corrosion is the result of chromium carbide precipitation on the surface of metals with a higher carbon content and prolonged exposure to high temperatures. Because the alloy used for 317L joints can withstand high temperatures without being corroded by intergranular corrosion, these joints can be used in the as-welded condition.

Annealing between 1050 and 1080¡ãC can be done after forging, followed by rapid quenching, especially to restore corrosion resistance, but there is no heat treatment to harden 316L.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction covered by the latest revision of Specification A960/A960M. Fittings differing from these standards may be furnished in accordance with Supplementary Requirement S58 of Specification A960/A960M.

The deformation activation energy is low during superplastic deformation, and the process may be controlled by diffusion.