20 years manufacturer plumbing ASTM A815 S32750 cap

In addition to our extensive inventory, HT PIPE stocks a wide variety of thermoplastic, sanitary, plastic lined and nickel alloy pipes, fittings and flanges. We have a full team of industrial sales experts who can answer any of your questions and find the material you need.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Alloy 400 is virtually immune to chloride ion stress corrosion cracking in typical environments.

ASTM A815 Pipe Fittings, ASTM A815 Super Duplex 2507 Pipe Fittings, UNS S32750 Super Duplex Pipe Fittings, ASTM A815 32205 Seamless Pipe Fittings, ASTM A815 S32950 Butt weld Fittings, ASTM A815 Super Duplex S32760 Pipe Fittings Exporter.

The seamless fitting is made up of seamless pipe and is available in 12 inches. Whereas the welded SS Equal tee is made up of welded pipe and is available in the size range of ? inches to 72 inches. The welded buttweld fittings are economical when compared to the welded ones. The Stainless steel concentric reducer is used to connect pipe sections or tube sections on the same axis and is usually used when there is a shift in diameter.

This feature is also particularly useful in procedures that use Nickel 201 fittings in the manufacture and processing of sodium hydroxide, which in turn is considered a special kind of caustic. Particularly unaffected by sodium hydroxide even at temperatures above 300 ¡ãC.

Some types of duplex steel pipe fittings are butt welded fittings, elbows, reducers, couplings, reducers, tees, adapters, joints, and more. Other features of this fitting are good corrosion resistance, pitting and crevice resistance, higher tensile strength, higher yield strength, good toughness, reliability, durability, oxidation resistance, mechanical properties, chemical properties Wait. In addition, it is used in the following applications in chemical industry, pulp and paper industry, condenser, offshore industry, etc.

The 316 stainless steel reducer is good to be used in water, marine and sea water applications to reduce the size of a pipe line. The ASTM A403 Grade wp316 tee is used to divide or connect two pipes with another pipe. The 316 grade of steel is also used for fittings in food grade applications. The ASME SA 403 WP 316 Pipe Cap is a unique type of fitting in that it closes a pipeline rather than connecting two parts together.

More than a hundred years of development have allowed nickel alloys to have a wide range of applications and strengths, and have produced many forms. We offer Inconel, Monel and Incolloy alloys for everyday use and high stress industrial, energy or chemical environments.

Our extensive technical experience and organized production procedures make us one of the most trusted suppliers of carbon steel fittings and flanges for large shipyards, manufacturing companies, chemical plants, oil refineries, machinery manufacturers, textile and fluid transport companies, etc. one.

ASTM A234 WPB Sch 40 Fittings covers carbon steel fittings of welded and seamless development secured by the foremost later revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. A234 WPB Carbon Steel Fittings to boot exceedingly corrosion-resistant has low string contact and profitable where high alloyed steel is required.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

We depend on this integral equipment to produce and deliver vital fluids at every stage, from production all the way to consumption. Sanitary elbow fittings are utilized in agricultural irrigation systems, soft drink production, beer brewing and dispensing, various plumbing systems, and more.

ASME B16.11 A403 Gr WP316L Threaded Fittings for Textiles, Pharmaceuticals, Condensers, Tanks and Evaporators. In addition to applications such as pressure vessels, industrial boilers, furnace components, threaded fasteners, and more, industrial manufacturers use these stainless steel 316L covers.

The material has good strength with 240MPa minimum yield strength and 585MPa minimum tensile strength.

Stainless steel tee is also a kind of pipe fittings, generally there are two kinds. That is, an equal tee, the diameter of the three ends is the same; a reducing tee, the diameter of the branch pipe is different from the other two.

Duplex 2205 fittings have higher yield strength and good mechanical properties. These fittings are highly resistant to corrosion and stress. The presence of ferritic alloys gives them strength to prevent cracking in sulfide and chloride environments.

Among the various grades of stainless steel, one grade is austenitic steel containing columbium. Fittings made from it are called stainless steel 347 fittings. They are widely used at high temperatures and have amazing forming and welding quality. The addition of columbium to stainless steel 347 weld fittings provides resistance to intergranular corrosion. It also shows improved corrosion resistance in strongly oxidizing environments. They are widely used to install, connect and configure other products.

These super duplex fittings products are designed in accordance with national and international standard specifications. These Super Duplex Steel S32750 Seamless Fittings and Super Duplex Steel S32750 Welded Fittings are widely used in various application industries such as automotive, chemical, marine, power plants, heavy engineering, etc.

HT Pipe is the well-acknowledged manufacturer and exporter of the high quality of Super Duplex Steel UNS S32750 Pipe Fittings. These are found utilized into outlet gas desulfurization systems. SD UNS S32750 butt-weld fittings are used in the applications that are food industry related such as vegetables, corn processing, etc.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction covered by the latest revision of Specification A960/A960M. Fittings differing from these standards may be furnished in accordance with Supplementary Requirement S58 of Specification A960/A960M.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.

This nickel alloy provides excellent resistance to hydrochloric acid at all concentrations and temperatures. In additions, Hastelloy B2 pipe bend has excellent resistance to pitting, stress corrosion cracking and to knife-line and heat-affected zone attack.

UNS S31803 fittings are composed of duplex stainless steel with equal amounts of austenitic and ferritic microstructures. UNS S31803 fittings are two-phase, ferritic, austenitic, 22% chromium, 3% molybdenum, 5 to 6% nickel alloy stainless steel.

Duplex Steel 2101 Butt Weld Pipe Fittings, which is the most widely used duplex (ferritic & austenitic) stainless steel grade made at par with the international quality standards making use of high-grade steel.?Duplex?Steel 2101 Pipe Fittings?are extremely corrosion resistant and work hardenable alloys.?Duplex Steel 2101 Buttweld Fitting?are almost never used above 300 Degree C.

Forging fittings Carbon content 0.35% maximum and Silicon content 0.35% maximum, no minimum.

ASTM A420 is the standard specification for pipe fittings of carbon steel and alloy steel used for low temperature services. WPL6 is the most used grade material under A420.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

This nickel steel alloy also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions.

Steel pipe fitting are made of carbon or alloy steel pipe, plates, profiles, to a certain shape that could make a function (Change the fluids direction or rate) in pipeline systems. Mostly these fittings includes steel elbow (45 or 90 degree bend), tee, reducer (concentric or eccentric reducer), cross, caps, nipple, flanges, gasket, studs and etc.