201 304 316 material casting stainless steel pipe fittings tee

We are stocking 22 WPHY 52. Petromet is distributor and dealer of Mss SP75 WPHY 52 Equal Tee, ASTM A860 WPHY 52 Reducing Tee in various sizes.

S32750 duplex pipe fittings is one of the buttweld fittings and is available in various shapes, sizes and specifications. This is used in marine industries, nuclear projects, power plants and other chemical industries. The durability of ASTM A815 WPS S32750 Fittings is excellent and the specification of this has two types i.e.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These fittings are produced from the highest quality raw materials and are well tested and inspected according to national and international standards. Manufacturers offer a full range of pipes and fittings such as UNS S32205 45 degrees. Elbow, Duplex UNS S31803 Reducer, Duplex S31803 Cap, Duplex S31803 Butt Weld Fitting, 2205 Duplex 90 Degree Elbow, Duplex S32205 Butt Weld Fitting, Duplex S32205 Fitting.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Stainless Steel Buttweld Fittings used in pressure piping frameworks of direct and high-temperature administrators.

Stainless Steel Elbow Buttweld Welded Pipe Fittings?is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress ¨C corrosion cracking, carburization, and excellent resistance to reducing or carburizing atmospheres.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Forged fittings produced in a facility covered by the ASME B16.9 standard must be manufactured in accordance with ASTM A 403. Molybdenum bearing stainless steel 316L fittings are also known as marine grade due to their excellent resistance in marine environments. While the chemical composition of grade 316L is similar to that of grade 316 stainless steel, the main difference between the two alloys is the nitrogen and carbon content.

Titanium has rather low thermal and electrical conductivity compared to other metals, although it exhibits superconducting properties when cooled below the 0.49 K temperature (its critical temperature).

The standards are ASME B16.9 and B16.28 and the schedules range from sch5s to XXS.

Our Werkstoff No 1.4436 SS couplings can be used in harsh environments such as seawater and marine applications. There are different types of accessories. We manufacture UNS S31600 Butt Weld Fittings for welding applications.

Strong and Oxidation Resistant to 2200 Deg. F (1200 Deg. C) – HASTELLOY X pipe bend is a solid solution strengthened grade has good strength and oxidation resistance up to 2200 Deg. F (1200 Deg. C).

The fabrication of ASTM A403 Stainless Steel Tee Fittings is done with the help of the latest technology, modern tools, raw material quality standards, and industrial norms.

We are a professional manufacturer and exporter of ASTM B366 WP20CB Pipe Fittings N08020 elbow, Alloy 20 Elbow Tee reducer Caps

C276 is suitable for off-shore applications where hydrogen-sulphide stress corrosion cracking resistance is essential.

ASTM B366 pipe fitting is used to connect straight pipe sections, adapt to different sizes or shapes and for other purposes, such as regulating(or measuing) fluid flow. These fittings are maded as per application requirements in different outer diameter and inner diameter with specified surface. HT pipe is a global distributor of nickel alloy pipe fittings in different sizes. Our company is constantly executing regualr as well as customised order for pipe fittings for sectors like oil and gas, engineering, etc.

C-22 is a great alternative when superaustenitic stainless steels (AL-6XN, 904L, and 254 SMO) and duplex stainless steels (2205 and 2507) will not withstand extremely aggressive media. This is because it is a nickel-chromium-molybdenum-tungsten alloy with better overall resistance to uniform and localized corrosion than any other Ni-Cr-Mo alloy, like Hastelloy C-276, C-4, and alloy 625.

Process piping systems rarely travel in a straight line from process to process.

The Stainless Steel Fittings Manufacturers produce these fittings with the addition of manganese, phosphorus, carbon, silicon, and sulfur apart from the 2 main elements.

Incoloy is a group of superalloys with good electrical resistance and tolerances. Incoloy 800 is an alloy of iron, nickel and chromium. These alloys are extremely resistant to corrosion and oxidation. They are not easily deformed or broken down under extreme pressure and heat. The alloy has medium strength and Incoloy 800 material has excellent mechanical properties.

Alloy 400 is resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride.

Super Duplex Stainless Buttweld Pipe Fittings, Super Duplex Steel S32760 Butt weld Pipe Fittings, 2507 Super Duplex Pipe Fittings, Super Duplex UNS S32760 Buttweld Fitting, Super Duplex Elbow Dealer in India, Global Supplier of 2507 Super Duplex Butt weld Pipe Fittings, ANSI B16.9 Super Duplex Steel Reducer.

We manufacture UNS S31803 double pipe fittings with a wealth of benefits. Some benefits are its high mechanical strength and high resistance to corrosion stress cracking. These duplex butt welded fittings are lightweight and therefore ductile;

Incoloy 800 Welded Butt Welded Fittings also contain 1.50% manganese, 1% silicon and up to 0.75% copper. Incoloy Alloy 800HT 180 degree bend has excellent corrosion resistance to stress corrosion cracking. Typically, these Incoloy UNS N08800 seamless pipe fittings are heated in the temperature range of 648 degrees Celsius to 760 degrees Celsius.

ASTM A182 Duplex Steel 2205 Elbow is used in high temperature applications where fluid direction must be changed smoothly without creating too much stress on the bend. There are different types of elbows; short radius, long radius, 90 degree and 45 degree. There are duplex steel Astm A815 fittings are forged stainless steel that can withstand high impact tension. High tension, high strength pipes can use this type of fitting.

Large selection of finished and semi-finished stainless steel caps/end caps, crosses, elbows, reducers, tees, stub ends and many other stainless steel butt weld fittings for use in power plants, oil and gas, water treatment, food processing , petrochemical, LNG industry, automotive, heavy engineering, offshore and chemical. We can supply butt welded pipe fittings individually or in conjunction with our other plumbing products.

Due to the lower carbon content in 317L fittings, the alloy can be welded without intergranular corrosion. Generally, intergranular corrosion is the result of chromium carbide precipitation on the surface of metals with a higher carbon content and prolonged exposure to high temperatures. Because the alloy used for 317L joints can withstand high temperatures without being corroded by intergranular corrosion, these joints can be used in the as-welded condition.