2022 duplex stainless connector pipe fittings elbows

A234 WPB steel pipe fittings mean the pipe fitting which material is ASTM A234 WPB,they are used for the pressure piping systems of moderate and high temperature services.ASTM A234 is the standard of pipe fittings material,it indicates the materials properties of different kinds of carbon steel and alloy steel,WPB is one of the steel grade in this standard.W means weldable,P means pressure,B is grade b,refer to the minimum yield strength,like the astm A106 A53,Gr.B or API 5L Gr.B.A234 WPB is the most common carbon steel pipe fittings material.

Alloy K500 has approximately three (3) times the yield strength and double the tensile strength when compared with 400. MONEL K500 can be further strengthened by cold working before the precipitation hardening.

Stainless Steel A403 WPS31254 contains higher chromium and low carbon content.Size : ?¡±NB to 48¡åNB in Sch 10s, 40s, 80s, 160s, XXS.

Our WNR 1.4462 Duplex Steel S31803 Pipe Fittings withstand sulphur-induced stress corrosion cracking, accommodate high steam pressures and provide extended service life, economical and reliable.

Steel Pipe Pipe Bends can work under constant pressure due to excellent dexterity and high load-bearing capacity.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Class CR fittings are those manufactured to the requirements of MSS SP-43, and they shall have pressure ratings compatible with 13.3. This specification does not apply to cast fittings.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.

we are stockholders of we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

Inconel 601 (N06601) Nickel-based alloy plasticity machinability.

WPB is the most commonly used carbon steel pipe fitting material for medium and high temperature application now, it can be made by steel pipe like ASTM A106 Gr.C or steel plate like ASTM A285 GR.C.

Stainless steel pipe is a kind of hollow long round steel or square rectangular material, which is widely used in industrial transmission pipelines and mechanical structural parts. In addition, with the same bending and torsional strength, stainless steel pipes are lighter in weight, so stainless steel pipes are also widely used in the manufacture of mechanical parts and engineering structures.

Our Stainless Steel 904L Buttweld Fittings (WNR 1.4539) are used in Power plants using fossil or nuclear fuels, and also in geothermal energy for harnessing heat from the earth. SS 904L Welded Tube Fittings are used for the cold chain to keep produce fresh, drinks, and frozen foods at a set temperature. SS WERKSTOFF NR. 1.4539 Buttweld Pipe Fittings are used in industries such as Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry.

This combination makes the material resistant to corrosion and high temperatures up to 889 degrees Celsius. 304 stainless steel butt weld fittings meet standard ASTM A403 and are available in outside diameters from ?” to 48″. For seamless fittings, diameters range from ? to 10 inches.

Grade 825 Incoloy alloy used to make butt welded pipe fittings has high corrosion resistance. It contains a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic structure.

These Buttweld 45 Degree Weld Elbows are manufactured to very high tolerances via hydroforming. Hydroforming results in a more uniform fitting that is easier to weld and polish.

ASTM A234 WP22 Pipe Fittings are made up of the specification that has carbon, manganese, silicon, sulfur, phosphorous, chromium and molybdenum in its composition. The molybdenum content is 0.9-1.1% of the composition which makes this grade specific. This grade has a tensile strength of 380MPa minimum and a yield strength of 585MPa minimum.

There are seamless and welded A234 WP9 pipe fittings,the seamless A234 WP9 pipe fittings are manufactured from seamless steel pipes A335 P9,welded A234 WP9 pipe fittings mean they are made from welded pipes or steel plates.Studying the market demands, we deliver quality products that are sustainable. Our products are 100% certified.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

Duplex 2205 fittings have higher yield strength and good mechanical properties. These fittings are highly resistant to corrosion and stress. The presence of ferritic alloys gives them strength to prevent cracking in sulfide and chloride environments.

316 stainless steel pipe bend contains an addition of molybdenum that gives it improved corrosion resistance. This is particularly apparent for pitting and crevice corrosion in chloride environments.

SA 815 S31803 Weld Fittings have exceptional chemical properties along with higher strength and good resistance to corrosion. Therefore this grade is used for fitting manufacturing. SA 815 S31803 Long/ Short Radius Elbow display outstanding resistance to pitting, crevice corrosion and have excellent weldability. They are perfect if one is looking for a sturdy pipe with good formability. ASME B16.9 WPS UNS S31803 Elbow also exhibits excellent resistance to acetic and marine environments.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Hastelloy C22 pipe fittings is a combination of versatile austenitic nickel, chromium, molybdenum, and tungsten alloy. This alloy enhances the resistance to corrosion, petting, and oxidations.

The most common dimensional standard for 45 degree carbon steel is SME B16.9, B16.28 MSS-SP43/75 for sizes ranging from ?¡± to 72¡å (in all Schedules).

INCONEL Alloy 600 (UNS N06600 W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

To avoid possible stress relaxation grain boundary cracking of N08811 in applications above 1000¡ãF the welded fabrication may be heated 1650¡ãF for about one hour per inch of thickness or 30 minutes minimum then air cooled.

Inconel 718 Reducer is a nickel-based superalloy ideal for applications requiring high strength in temperatures ranging from cryogenics to 1400 degrees Fahrenheit.