2022 hot-sale product .en253 standard pre-insulated ASTM B366 UNS N06600 End Cap pipe fitting for heat and cold supply

We offer a dependable selection of TEE made of a variety of substances and come in a variety of sizes and finishes and various materials such as Stainless Steel, Carbon Steel, Cast Iron, etc.

We are a manufacturer, trader, stocker, supplier and exporter of alloy 20 pipe fittings made from niobium stabilized austenitic pipe fittings that minimize carbon induced carbide precipitation during welding.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

The austenitic structure of 316 stainless steel provides excellent toughness even at low temperatures.

The ASTM A234 WP5 specification consists of wrought carbon steel and alloy steel in seamless and welded form. The ASTM A234 WP5 Pipe Fittings are widely used in pressure vessel fabrication. These fittings have application under moderate to high temperatures and can also be effectively used in pressure piping systems.

Type 304 is the most popular stainless steel and is a natural choice for its corrosion resistance. It resists rusting in many different environments, but is primarily attacked by chlorides.

ASTM A420 is the standard specification for pipe fittings of wrought carbon steel and alloy steel for low temperature service. These fitting, either of seamless or welded construction, are primarily used in pressure piping and pressure vessel service at low temperatures. Metals-Piping can provide all the four steel grades covered by ASTM A420: WPL6, WPL9, WPL3, and WPL8.

ASTM a403 wp304L elbows are installed between two lengths of pipe to allow for a change of direction. Usually available with 90¡ã or 45¡ã elbows, 90¡ã elbows are also known as “90 bends”, “90 ell” or “quarter bends”, and 45¡ã elbows are also known as “45 bends” or “45 ells” Elbows are also classified by length. Long radius elbows have a radius of curvature that is 1.5 times the pipe diameter, while short radius elbows have a radius equal to the pipe diameter. ASTM A403 WP304L is the most versatile and versatile of the stainless steel family alloy, ideal for a variety of commercial and domestic applications.

Alloy Steel Weld Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. It is mainly used small pipe diameters generally for piping whose nominal diameter is NPS 2 or smaller. Its tensile strength of is between 758-1882 MPa which is higher than the tensile strength of stainless steel.

A403 wp304 Tee is a T-shaped fitting with two outlets connected at 90 degrees to the main line. At right angles to lines, used to connect pipes and pipes.

Stainless steel pipe fittings are widely used in manufacturing for their durability and cost-effectiveness. It has many advantages over traditional pipe fittings that make it more popular than any other. The cost-effectiveness of alloy products has greatly facilitated their widespread use. In addition to this, it also helps with the maintenance of the plumbing system.

Stainless steel 316 pipe fittings are a product made of grade 316. It is also called marine grade. These UNS S31600 SS elbows are said to have better mechanical and corrosion resistance properties than other stainless steel grades. Although stainless steels are often referred to as austenitic steels, with nickel and chromium alloys SA403 WP316 SS Stub has molybdenum added to the ends to improve its resistance to pitting corrosion.

This material should be arranged the charpy V impact test in temperature of -46¡æ, to make sure it can work in a lower temperature service, for example in cold weather, winter or deep-sea water offshore projects.

Stainless steel 347 reducer has tensile strength and minimum yield strength. Stainless Steel 347 Stub End Fittings are a non-magnetic grade that cannot be hardened by heat treatment, are typically used in the annealed condition, and are known for their ease of fabrication and formability.

Stainless Steel 310S Butt Weld Fitting (UNS S31008) is a low carbon version of Stainless Steel 310 Butt Weld Fitting. We also offer these butt welded pipe fittings in custom forms based on size and shape. The high chromium and nickel content of stainless steel 310S stud end fittings maintains a greater percentage of room temperature strength than common austenitic alloys such as SS 304.

Hastelloy X pipe bend is corrosion resistant, heat resistant and oxidation resistant, being able to withstand reducing or neutral atmospheres and oxidation.

Super duplex UNS S32750 Buttweld Fittings has a low carbon content which lowers the risk of carbide precipitation in the grain boundaries during the heat treatment. They are highly resistant to crevice corrosion due to high chromium and molybdenum content of UNS S32750 Super Duplex Pipe Fittings makes it extremely resistant to uniform corrosion by organic acids such as formic and acetic acid.

ASTM A234 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.

ASTM A234 WPB Sch 40 Fittings covers carbon steel fittings of welded and seamless construction secured by the most recent amendment of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97.

Alloy 800H/800HT is frequently used in applications that involve long-term exposure to elevated temperatures where resistance to oxidation, carburization and other types of elevated temperature corrosion is required.

Hastelloy B2 pipe bend resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition.

Duplex Steel S32550 Pipe Fittings has high stress corrosion resistance. These UNS S32550 Pipe Fittings also has lower thermal expansion than austenitic stainless steels. It also has higher thermal conductivity than austenitic stainless steels, and excellent general corrosion resistance in a wide variety of corrosive chemicals including seawater and industrial acids

These alloy steel wp22 seamless pipe fittings are produced with the aim to provide better performance and fulfill all the requirements of industrial applications.Our A234 WPL22 Street Elbows have both the ends threaded, thus affixing on pipes in the drainage, plumbing, and water piping systems effortlessly.

The S31803 is used in many programs in unique industries such as superheaters, boilers, condensers, heat exchangers, chillers, coolers/intercoolers, etc. They are also used in unique industries such as fertilizer plants, oil refineries, steel mills, sugar industries, and more. Duplex WNR 1.4462 Forged Socket Weld Hex Plus Fittings done by run mode and follow steps to complete important radii with buyer drawing.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

HT PIPE is the government certified and doing business in steel industry for long years and are manufacturing S32750 Duplex buttweld fittings at affordable rates.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These pipes work efficiently under reducing and oxidizing conditions in acid and can be used as structural materials for gas desulfurization units. The higher nitrogen content ensures excellent corrosion resistance.

The cast stainless steel pipe fittings such as 304 or 3016l are available in several different types for use in different applications such as threaded, flared, without flare and flange adapters. They provide a safe and leak-proof seal for refineries, chemical processing units, power supply units, and different processing lines. They are suitable for high-pressure applications as well as high temperatures, for instance, nuclear industry and petrochemical, etc.

Monel K500 pipe bend and elbow are usually used in propeller, pump shafts, pumps, valves used in the manufacture of perchlorethylene, and chlorinated plastics.