2022 hot-sale product:.en253 standard pre-insulated duplex pipe fitting for heat and cold supply elbows

NAS 800H (NCF 800H, UNS N08810)/NAS 800T (UNS N08811) are nickel-iron-chromium alloys that provide high strength and excellent resistance to oxidation and carburization at high temperatures

Inconel 600 butt welded pipe fittings have excellent mechanical and physical properties. They have high strength and enhanced solderability over a wide temperature range. They show good resistance in different types of corrosive media and the fittings are non-magnetic in nature.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

While fitting and sizing bent pipes might seem complex at first, a basic understanding of the measurements used make matching them to your existing system or integrating them into a new design straightforward.

Designed to combine impact toughness against chloride stress corrosion cracking with pitting and crevice corrosion, S31254 stainless steel is twice as strong as stainless steel 300 series.
It is also known for its excellent machinability.

Our high quality stub end A-type stub end butt welded joints are tested and proven for durability, accuracy and precision. ANSI B 16.9 Stub End is widely used in plumbing engineering to connect different types of pipes.

Stainless Steel B366 WP904L contains higher chromium and low carbon content.Our SS 904L Elbow have resistance to atmospheric corrosion and serve general purposes like sealing pipe ends and preventing any contamination to the internal fluids.

Stainless steel pipe fittings are used to connect 2 pipes as they have a pipe fitting at one or both ends. The stainless steel reducing tee has a tensile strength of 515 MPa and a yield strength of 205 MPa.

Hastelloy B3 pipe fittings is a Nickel, Molybdenum, and Chromium alloy which has excellent resistance to pitting, corrosion, stress-corrosion cracking plus and thermal stability superior. Alloy B3 exhibits excellent resistance to sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media.

Titanium is also a ductile metal, especially in an oxygen-free environment.

Nickel 201 fittings have good corrosion resistance to a wide range of acids and bases. These accessories have been found to be useful in conditions containing reducing agents. Like alloy grade 200, Nickel 201 caps are significantly resistant to caustic, especially in molten conditions. Its alkali resistance makes this alloy beneficial if it is used in the manufacture of viscose rayon.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Ordinary steel fittings are susceptible to chloride stress corrosion cracking. However, ASME SA815 Duplex Pipe Reducers are better because they inhibit deformation and avoid corrosion cracking even at high temperatures. UNS S31803 Duplex Steel Tee is said to have amazing resistance to toxicity and elasticity, so it is used in the gas desulfurization industry. WERKSTOFF NR. 1.4462 end caps are highly resistant to intergranular corrosion and are therefore used for termination connections.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.

Stainless Steel A403 WP316l contains higher chromium and low carbon content. Lower carbon means less chromium carbide precipitation due to welding. This steel type contains as low as 0.03% of carbon content and thus reduces its susceptibility to intergranular corrosion. This kind of steel can be continuously exposed to temperatures of about 1500¡ãF without appreciable scaling.

In our factory, all fittings, such as 90¡ã carbon steel short radius elbow pipe fittings, go through a strict quality inspection system at all stages of production. This rigorous quality inspection ensures that our buyers receive only our highest quality products. These ANSI/ASME B16.9 90¡ã Stainless Steel Short Radius Elbows 1.5d are designed to international quality standards. As a result, these ASME B16.9 short radius elbows are dimensionally corrosion resistant and durable.

Alloy C276 is increasingly used in aggressive or corrosive environments where other alloys fail.

They can also be seamless in nature. The nominal diameter of the seamless fittings ranges from ? inches to 24 inches and the welded fittings range from ? inches to 120 inches in diameter.

ASTM B366 pipe fitting is used to connect straight pipe sections, adapt to different sizes or shapes and for other purposes, such as regulating(or measuing) fluid flow. These fittings are maded as per application requirements in different outer diameter and inner diameter with specified surface. HT pipe is a global distributor of nickel alloy pipe fittings in different sizes. Our company is constantly executing regualr as well as customised order for pipe fittings for sectors like oil and gas, engineering, etc.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Hastelloy B2 pipe bend is a nickel-molybdenum alloy particularly suited for equipment handling reducing chemical environments.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

They come in different sizes and types; for example, the SS 304 45 degree elbow is used to change the direction of the pipe by a 45 degree angle. Likewise, the UNS S30400 90-degree elbow changes the direction of the pipe by a 90-degree angle. According to customers’ requirements, we can provide exclusive elbows to meet their needs.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

T In the normal case, the stainless steel stub end is welded to the pipe, allowing the free lap pipe flange to pivot around the stub end; it eliminates the bump gap arrangement problem.

This alloy provides improved resistance in highly corrosive environments with sulfur-containing media and chlorides. Stainless steel UNS S31700 pipe elbows are non-magnetic in the annealed condition. It can be easily welded and machined. Stainless steel 317 / 317L forged fittings can be hardened by cold work.

It is commonly referred to by the tradename Hastelloy C22 and the universal designation UNS N06022. C22 has excellent corrosion and oxidation resistance, great mechanical properties over a wide range of temperatures, and good fabrication properties.

Corrosion resistance of duplex steel radius fittings provided. Comparable to standard austenitic grades or high alloyed ferrites. Although duplex steels have good high temperature oxidation resistance like other duplex stainless steels, embrittlement can occur even at temperatures above 300 degrees Celsius for short periods of time. In case of embrittlement, duplex steel stub joints can only be corrected by a complete solution annealing treatment.

Duplex fittings are used in different types of piping applications. 2205 is a standard duplex steel with 21% chromium. The material is strong, twice as strong as austenitic steel types. Different standards such as ASME B16.9, B16.28 and B16.25 govern the dimensions. Depending on the type of fitting, the nominal bore diameter of the fitting can also vary.