2205 S31803 duplex pipe in very oxidizing and acidic solutions

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Super Duplex UNS S32760 Reducing Flanges have a strengthened microstructure, a result of added Nitrogen, allowing fabrication of thin and low-weight flanges that are easy on the pocket.

We are suppliers of WNR 1.4410 Super Duplex Steel Weld Neck Flanges with matching stub-ends that withstand alkalis under higher temperatures.

ASTM A815 UNS S32205 Long Radius Elbow is used in turning pipe direction and is also resistant to chloride and sulfide environments. These ASME B16.9 Duplex Stainless Steel Seamless Fittings have a higher chromium content.

Duplex 2205 bolts have a ductile to brittle transition at -50¡ãC and also become brittle at 300-1000¡ãC, so a temperature of -50¡ãC to 300¡ãC is recommended. Exposure to above 300¡ãC will not only cause embrittlement of 2205 bolts, but will also reduce corrosion resistance.

As well as greater tensile and yield strength whilst still providing good ductility and resistance to stress corrosion cracking.

Super Duplex UNS S32750 /F53 Flanges are made from a super duplex stainless steel grade that has 24% chromium, 3% molybdenum, 6% nickel and carbon, manganese, silicon, sulfur, phosphorus, nitrogen and iron in the composition.

Duplex UNS S32205 fasteners are widely used in construction and other industrial applications. We offer these types of fasteners in differenut thicknesses and tolerance limits for a variety of industrial applications.

Duplex 2205 stainless steel round bars (ASTM A276/ ASTM A479) exhibit good heat resistance up to 300¡ã. SS Rod can be easily welded by most standard methods, the only mandatory requirement is the use of filler metal. Due to its high strength, machinability is low.

Duplex is often found in desalination and pressure vessel equipment located in port cities.

The combination of the ferritic phase and austenitic phase provides both high strength and excellent corrosion resistance.

Super Duplex 2507 (F53 / 1.4410 / UNS S32750) has excellent corrosion resistance to a variety of media, and has excellent resistance to pitting and crevice corrosion in seawater and other chloride-containing environments, with a critical pitting temperature exceeding 50¡ãC.

Duplex 2205 stainless steel is resistant to chlorides and H2S. Is a problem solver in most industry segments. Duplex 2205 is utilized in heat exchangers and piping in oil and gas, oil refinery, chemical, and petrochemical industry.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex bolts S31803 are widely used in several industries due to the enhanced strength transferred from the structural austenitic portion. In contrast, the ferritic fraction instills superior toughness from the transport of the fine structure. UNS S31803 Fasteners with excellent mechanical properties can become a buyer’s favorite by pre-reducing the cross-section of the final product, thereby reducing the overall weight, thus lowering the overall price.

The advantages of duplex steels include: good weldability and machinability, high resistance to corrosion fatigue, resistance to stress corrosion cracking (especially chloride stress corrosion cracking), erosion and high energy absorption.

These super duplex UNS S32760 round bars are available in a variety of shapes, sizes and diameters depending on the needs and requirements of the application and customer supplied specifications. These super duplex UNS S32760 round bars are resistant to localized corrosion.

Unlike the conventionally used austenitic 300 series stainless steels, duplex stainless steels generally have exaggerated properties. Duplex tube suppliers recommend using only this alloy as it combines both properties to produce positive results.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.55

Its impact strength or hardness properties inherited from the ferritic side make 2507 stainless steel round bar suitable for structural applications including bridge construction and more.

We offer a complete range of 2205 Duplex Steel Fasteners such as Bolts, Nuts, Washers, Screws, Connecting Rods and Duplex Steel Screws. We also offer super duplex fasteners in different sizes, shapes, features and thicknesses according to customer requirements.

They have a design that allows for the pipes to pass through the flange and locate the correct point for connection. The ASTM A182 grade F53 WNRF Flange has a welded neck raised face.

The high oxidation resistance property of Grade 2205 is marred by its embrittlement above 300¡ãC. This embrittlement can be modified by a full solution annealing treatment. This grade performs well at temperatures below 300¡ãC.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

For many applications where 300 series stainless steel is susceptible to chloride stress corrosion cracking, 2205 duplex stainless steel is a cost-effective solution. Stress corrosion cracking occurs when stainless steel is subjected to tensile stress while in contact with solutions containing chlorides. Elevated temperatures also increase the susceptibility of stainless steel to stress corrosion cracking.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.52

UNS S32750 Bolts are used for the assembly of two unthreaded components, with the assistance of a nut. UNS S32750 Bolts are known to have superior properties such as high tensile and yield strength.

Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment.

Super Duplex 2507 is designed to handle highly corrosive conditions and where high strength is required. The high molybdenum, chromium and nitrogen content in Super Duplex 2507 helps the material withstand pitting and crevice corrosion.

The material has high strength values. The minimum yield strength is 450MPa and the minimum tensile strength is 620MPa, with 25% minimum elongation and 290HB Brinell hardness.

Grade 2205 is the most widely used duplex stainless steel grade. Fittings of this grade finds applications due to both their excellent corrosion resistance as well as their high strength.

Duplex stainless steel pipes and fittings are generally less expensive because of the lower proportions of alloying elements used in the manufacture of duplex stainless steels. Compared to austenitic stainless steels, duplex stainless steels have higher yield strengths, so users can buy duplex pipes and duplex pipe fittings in relatively lower thicknesses.

The flanges could also be manufactured as screwed, threaded or forged types. The forged flanges are made from a single piece of raw material. These are also called the cast flanges.

Duplex 2205 stainless steel (ferritic and austenitic) is widely used in applications requiring good corrosion resistance and strength. Grade S31803 stainless steel was modified several times to form UNS S32205, which was recognized in 1996.

Compared with ferrite, it has higher plasticity and toughness, no room temperature brittleness, significantly improved intergranular corrosion resistance and welding performance, and maintained 475 ¡æ brittleness, high thermal conductivity and Superplasticity of ferritic stainless steel. Compared with austenitic stainless steel, its yield strength is significantly improved, and its resistance to intergranular corrosion, stress corrosion, corrosion fatigue and abrasion is significantly improved.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”