22691k elbow socketless grp stainless steel pipe fitting hose fitting female compact elbow fittings

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

The alloy can be machined at satisfactory speeds with machine tools commonly used in the industry. Generally, cold drawn or cold drawn stress relief materials are recommended for the best machinability and smoothest finish.

The Inconel Alloy 625 is immune against chloride stress cracking.

The length of the pipe nipple is usually specified by the overall length with threads. It may have a hexagonal section in the center for the wrench to grasp (sometimes referred to as a ¡°hex nipple¡±), or it may simply be made from a short piece of pipe (sometimes referred to as a ¡°barrel nipple¡± or ¡°pipe nipple¡±).

Resistant to various corrosive media. Chromium content provides better resistance in oxidizing conditions than alloys 200 and 201, while high nickel provides good resistance in reducing conditions.

We offer products at highly competitive prices and deliver consignment within stipulated time. Our Pipe inventory is available in random lengths or cut to specific lengths to meet your exact requirements.

A steel nipple fitting is a straight length of pipe with external threads on both ends. It is one of the most popular categories of pipe fittings. It is a connector or coupling with threads on both ends. Fittings are used to connect pipes to water heaters or other pipes.

These fittings are available in different types such as elbows,couplings,tees crosses,plugs,pipe nipples etc.

Steel pipe fittings are made of carbon or alloy steel pipes, sheets, profiles, and have a shape that allows them to function (change the direction or rate of fluid) in a piping system. These accessories mainly include steel elbows (45 or 90 degree bends), tees, reducers (concentric or eccentric reducers), crosses, caps, pipe joints, flanges, gaskets, studs, etc.

Typical applications of Inconel 800 include the food and beverage industry, in addition to being used for heat treatment components.

Carbon steel forged fittings and flanges are prevalent and common used in industries, the representative material grade is ASTM A105 and A350 LF2/LF3.

Heat treatment the ASTM A105 Fittings is not a mandatory requirement. Although there is an exception for flanges that have an ASTM A105 Fitting Pressure Rating above Class 300. These are flanges of special design, wherein both the design pressure or the design temperature are not known as well as for items over 4 inches NPS and above Class 300. Heat treatment is required, when methods such as normalizing, annealing, normalize and temper, normalize and quench and tempering must be applied.

Incoloy 800 may be also used for applications such as wet scrubbing, and the reactive atmospheres of furnaces as well as in industries like nuclear fuel.

In the manufacturing industry, the production is done by obviously using the best possible quality of crude materials and alloys. It thus tends to offer various good attributes.

The heated carbon steel is then machined into the forged steel fittings. carbon steel astm a105 fittings is used for ambient- and higher-temperature service in pressure systems.

ASME B16.9 is a widely recognized standard in the industry for fittings, flanges, and valves used in pipelines. The specifications of this standard cover dimensions, tolerances, materials, and markings for varying types of products. One commonly used product is the elbow, and the A234 WPB Long Radius Carbon Steel Elbow is a popular choice.

ASTM A182 F91 is an American standard Martensite type heat-resistant steel forgings, according to ASTM A182-2016.

This specification covers standards for forged carbon steel piping components, that is, flanges, fittings, valves, and similar parts, for use in pressure systems at ambient and higher-temperature service conditions.

ASTM A105 is also called carbon steel, refers to the carbon content of WC less than 2% iron carbon alloy.

The B2 forged fitting is the cornerstone of a strong comic, and the composition of Hastelloy leverages it to have the necessary strength and quality standards to help it withstand a lot of stress for years to come.

Annealing softening begins at approximately 1600¡ãF (871¡ãC) and is fairly complete after 10 to 15 minutes of heating at 1800¡ãF (982¡ãC). Above this temperature, grain growth can be objectionable, although very brief heating at 1900¡ãF will result in complete softening without excessive grain growth. Since the cooling rate has no effect on softening, the material can be water quenched or air cooled.

As an ISO certified company, we stand by the principles of quality, safety, and precision in all our products.

The inclusion of chromium in combination with nickel in its chemistry makes it resilient to chemical and environmental corrosion.

A bushing is a type of bearing. Generally speaking, “bearings” facilitate movement between two components while reducing friction. Simple in design, a typical bearing has two surfaces that roll against each other, allowing the two mating parts to move without friction.

Steel pipe elbow plays a key role in the pipe fittings, which frequently used in different application and available in various shapes and sizes. It connects two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree, 90 degree or 180 degree.

ASTM A105, also known as carbon steel, is an iron-carbon alloy with an internal carbon content of nearly 2 percent.

Tube caps are used as protective devices designed to protect tube ends of various shapes. The main purpose of using pipe caps is to waterproof connections. They are also used to close the ends of hydraulic or pneumatic pipes and tubes.

Couplings are pipe fittings that serve to prolong or stop pipeline operations. Such fittings also help to adjust the thickness of the tubing. It also helps to patch a pipe that is broken or leaking.

The pipe fittings of special shape or those not suitable for die forging can be manufactured by free forging process.The rough shape of pipe fitting should be forged by free forging; If the tee, should be forged out of the branch pipe.

Our ASTM A182 Threadolet are accessible to our valuable customers in different range of diameters (d), wall thicknesses (w) and sizes (nom. Pipe Size) in customized form (as per customer requirment or order) and also at quite affordable rates.

It is virtually immune to chloride ion stress corrosion cracking. Sufficient resistance to organic acids such as acetic acid, formic acid and stearic acid.