tee grp stainless steel pipe fitting hose fitting female compact fittings

Our products, such as Duplex Steel S31803 Butt Welded Pipe Fittings, are custom made to our esteemed customers’ requirements and manufactured with precision. We believe in timely delivery without compromise.

We are a manufacturer, trader, stocker, supplier and exporter of alloy 20 pipe fittings made from niobium stabilized austenitic pipe fittings that minimize carbon induced carbide precipitation during welding.

The alloy has great mechanical properties at subzero temperatures, and with a melting point of 2370¡ã ¨C 2460¡ã F, products can be used at temperatures up to 1000¡ã C.

Chemical and product analysis should be performed and should meet the required chemical composition of carbon, manganese, phosphorus, sulfur, silicon, chromium, molybdenum and titanium.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The higher strength results from deliberate control of the carbon, aluminum, and titanium contents in conjunction with a high-temperature anneal.

The fabrication of ASTM A403 Stainless Steel Tee Fittings is done with the help of the latest technology, modern tools, raw material quality standards, and industrial norms.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

we are stockholders of we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

HASTELLOY X pipe bend also resists carburization and nitriding, two common conditions which often lead to early failure in high-temperature alloys. After 100 hours in petroleum coke, four other materials were completely penetrated by carburization and whereas.

Both materials remain available, subject to commercial considerations, and certain specifications which restrict the service temperature of some grades of INCOLOY alloy 800H.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Stainless steel 304 for resistance to corrosion and high temperatures. It has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This 90-degree unpolished weld elbow with tangent sanitary fitting is suitable for use in food, beverage, and dairy applications.

The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries.

This action draws the pipe or tube forward making the desired bend.

Inconel 625 elbow works well even in extreme temperatures under high stress.

Elbows are versatile fittings that affect flow characteristics by being redirected from different angles. These elbows are designed as short or long radius elbows in different directions. Both can be differentiated based on certain characteristics.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Hastelloy C-276 is available in the form of plate, sheet, strip, billet, bar, wire, covered electrodes, pipe, tubing, pipe fittings, flanges, fittings.

Corrosion resistance of duplex steel radius fittings provided. Comparable to standard austenitic grades or high alloyed ferrites. While duplex steels have good high temperature oxidation resistance like other duplex stainless steels, embrittlement can occur even at temperatures above 300 degrees Celsius for short periods of time. In case of embrittlement, duplex steel stub joints can only be corrected by a complete solution annealing treatment.

Low carbon based wrought iron high yielding A860 WPHY 70 elbow fittings are chemically composed of metallic elements like – nickel, chromium, molybdenum, manganese, copper, vanadium, titanium, niobium, sulphur, silicon and phosphorus. Addition of these metal elements to the alloy makes it stronger and gives it increased resistance to corrosion. The yield strength of WPHY 70 material is 570 Mpa and its tensile strength is 485 Mpa.

We’ll do our greatest to fulfill your specifications and are sincerely searching ahead to developing mutual helpful small business marriage with you! Since improving the technical grade and quality level of products reflects the value of the company and is also a social responsibility, we will continue to move forward with the essence of the corporate culture of rigorous and realistic, scientific and technological innovation.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

INCONEL Inconel 601 (UNS N06601 / W.Nr. 2.4851) is a general purpose engineering material for applications requiring heat and corrosion resistance. An outstanding feature of INCONEL 601 alloy is its resistance to high temperature oxidation.

We manufacture premium duplex 31803/32205 fittings with many key properties such as high resistance to corrosion fatigue, stress corrosion cracking, especially chloride stress corrosion cracking, erosion, excellent workability and weldability.

200 is 99.6% pure nickel, one of the toughest metals. HT PIPE is a leading supplier and exporter of Nickel 200 butt welded and forged fittings. We supply Nickel Alloy 200 butt welded and forged fittings to all customers worldwide according to customer requirements.

Stainless steel reducing tees are very practical in the oil, gas, water pipes, power plants, construction and food industries.

Our mission is to create innovative products for consumers that provide a superior working experience for 42″ welded steel pipe, ASTM A179 heat exchanger pipe, forged 316 stainless steel threaded flanges. At present, we have established and improved the sales network, with excellent quality, professional technology, lasting strategic planning, precise marketing, and humanized after-sales, we have achieved a mutually beneficial and win-win sales situation and service system with our partners. Since its establishment, the company has developed rapidly and its business has continued to grow. We have established a good mechanism to shorten the time for customers to select and compare products one by one when purchasing a whole batch of products.

A234 WPB steel pipe fittings mean the pipe fitting which material is ASTM A234 WPB,they are used for the pressure piping systems of moderate and high temperature services.

We are a manufacturer, trader, stocker, supplier and exporter of a full range of Duplex Steel S31803, S32205 Pipe Fittings made of 50-50 Austenitic-Ferritic microstructure with excellent impact toughness and higher resistance to general corrosion.