2inch 3inch 4inch 6inch wn weld neck flange

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

At elevated temperatures the annealed and solution annealed alloy shows good resistance to scaling and has high strength. The alloy also resists ammonia bearing atmospheres, as well as nitrogen and carburizing gases.

Our WNR 2.4856 Flanges retains potency over an extensive temperature range, striking for elevated temperature applications where steel and aluminum would yield to sneakby means of thermally persuaded crystal vacancies. These are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes at quite affordable rates.

Alloy 600 is machinable in both hot and annealed conditions. Due to the large amount of heat generated when machining this alloy, high-speed steel, cast non-ferrous or carbide tools should be used.

Alloy 600 also has excellent mechanical properties with high strength and good machinability.

Inconel bolt fasteners consist of three parts – a head at the top, a long cylinder with external threads, and a chamfer at the bottom.

Corrosion rates are generally accelerated in aqueous media. However, due to the alloy’s strong nickel and chromium chemical base, the corrosion rate of nickel alloy 601 hex bolts is much lower.

The strength of Asme B16.5 Inconel 625 flanges is derived from the hardening effect of alloying metals such as molybdenum and niobium on the nickel-chromium matrix of the alloy. Therefore, Uns N06625 flanges do not require precipitation hardening in manufacturing to save costs.

The material has high corrosion resistance and high strength. The minimum tensile strength is 185ksi, the minimum yield strength is 150ksi, and the elongation is 12%. ASTM B637 UNS N07718 Nuts are also available in 331BHN or equivalent.

inconal 600 is a nickel-chromium alloy used for applications that need high temperature resistance and corrosion. This nickel alloy was developed for service temperatures from cryogenic to elevated temperatures in the range of 2000¡ã F.

Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition.

Nickel Alloy 600 is a solid solution of its elements and cannot be strengthened by heat treatment. Cold working will result in increased strength. Heat treatment can remove any undesirable effects of cold work.

Alloy 718 is used in these environments due to its high strength and ability to perform well at high temperatures.

HT PIPE become one of the leading and most trusted manufacturers and suppliers of ASME SB564 Inconel Grade 625 Flanges in Mumbai, India By supplying the highest quality products to our customers. We are Offering reasonable prices incorporating large discounts against a range of Inconel Alloy 625 Flanges.

Inconel 600 flanges (UNS N06600) have excellent mechanical properties, are non-magnetic, and exhibit the required combination of good weldability and high strength over a wide temperature range. We also supply these Inconel flanges in custom form to our customers based on size and shape.

Inconel 600 is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion. Inconel 600 also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range. in Inconel 600 material is mostly required in form of Inconel Pipe, Inconel 600 Plate, Inconel 600 Pipes, Inconel 600 Tubes, Inconel 600 Pipe fittings, Inconel 600 Flange
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel 718 flanges are highly resistant to water corrosion and can only be hardened and strengthened by cold work. Inconel 718 flanges are also highly resistant to chloride stress corrosion cracking.

Inconel 718 Nuts, also known as Alloy 718, are a precipitation hardening (also known as age hardening) form of Inconel 625. This heating and quenching process is used to change the atomic structure of the alloy, making it stronger by locking the metal’s grain structure in place. Additional strength can be obtained by cold working.

There are different functional types such as the ASME SB564 Alloy 601 Lap Joint Flange, slip on flanges, weld neck flanges, socket weld flanges and orifice flanges. The face type of the flanges vary as flat face, raised face and ring type joint.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

Inconel 600 Bolts are composed of Chromium, Nickel and Molybdenum. This makes these bolts superior to stainless and carbon steel bolts. The lengths of these bolts are between 3mm and 200mm. Inconel 600 Hex Bolts are highly resistant to corrosion and oxidation. These bolts are designed to handle extreme temperatures and high pressures.

A standard AMS 5666 or UNS N06625 variant of Inconel 625 may contain 58% nickel, 22% chromium, and 3.5% niobium.

Inconel 625 Material can be used as propeller blades for motor patrol gunboats, wire rope for mooring cables, submarine auxiliary propulsion motors, sheathing for undersea communication cables, submarine quick disconnect fittings, exhaust ducts for Navy utility boats, submarine transducer controls, and steam-line bellows. We have built and designed our products to meet market demands and requirements. We deliver products that are 100% durable.

Nuclear systems also generally involve high temperatures beyond 650¡ãC, in which the strength of Inconel 625 elbow can withstand.

ASTM B564 UNS N02200 Flange The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

The unique combination of its components makes Inconel 625 highly resistant to corrosive substances.

Nickel Alloy 600, also sold under the brand name Inconel 600. It is a unique nickel-chromium alloy that is known for its oxidation resistance at higher temperatures.

The alloy is used extensively in the chemical industry for its strength and corrosion resistance.

Alloy 600 is a nickel-chromium-iron alloy characterized by: good mechanical properties at low, room and high temperature, very good resistance to stress corrosion cracking, even at high temperature, high temperature corrosion resistance to dry chlorine and hydrogen chloride Good resistance and good resistance to oxidation, carburization and nitriding.

The alloy has excellent high-temperature oxidation resistance, good high-temperature mechanical properties and corrosion resistance, and is easy to form,

The optimum conditions for Alloy 601 seamless pipe depend on the type of application and the service temperatures involved. Generally, Alloy 601 pipe in solution treated condition is used in fracture-limited applications, where temperatures can be as high as about 1000¡ãF and still may rise.