3-4 inch 1-2inch-2inch 90r elbows steel pipe fitting hot fittings S31803

We are a manufacturer, supplier and distributor of premium quality Nickel Alloy Forged Elbow. Our primary purpose in providing this product is to understand and meet our customers’ operational requirements. We have supplied these products to large industrial sectors for many years and have earned the trust and satisfaction of our valued customers.

Tube caps are used as protective devices designed to protect tube ends of various shapes. The main purpose of using pipe caps is to waterproof connections. They are also used to close the ends of hydraulic or pneumatic pipes and tubes. We supply 1-8 SS304L pipe butt weld pipe fitting cap.

Stainless Steel Duplex 2205 is the most widely used duplex (ferritic/austenitic) stainless steel grade. It finds applications due to both excellent corrosion resistance and high strength. Duplex 2205 is a nitrogen enhanced stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels.

It has high quality and erosion resistance.?317 Stainless Steel Elbow?is harder than?SS ASTM A403 WP317 Buttweld Fittings. It is suggested to utilize chip breakers.?

The carbon steel ASTM A234 WPB pipe fittings offer a wide of industrial application like chemical equipments, boiler and exchanger manufacturing, mining, refineries, utilities, oil refineries and many others.

The 317L (00Cr19Ni13Mo3, UNS S31726) alloy is a molybdenum-based austenitic stainless steel. It is more resistant to chemical corrosion than conventional chromium-nickel austenitic stainless steels such as 304 alloy. In addition, compared with conventional stainless steel, 317L alloy has higher ductility, stress corrosion resistance, compressive strength and high temperature resistance. It is a low carbon grade or L grade, which is resistant to sensitization during welding and heat treatment.
Compared with 316L, 317L steel has good seawater resistance and SCC resistance, and is used in chemical ships, chemical products Reactor and other chemical equipment requiring high corrosion resistance.

The pitting resistance of ASME B16.9 SS 316L fittings is much higher compared to Grade 316. While Alloy 316L can be easily welded by most commonly used processes, Werkstoff Nr. is post weld heat treated.

UNS S31603 Elbow also has excellent resistance to pitting corrosion and soaring tensile strength. They are machined to have tough and strong chip characteristics. SS 316L 45 Degree Elbow is also considered to be more resistant to general corrosion and pitting than normal Nichrome.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.
Teel Industry has grown in the past few decades and there are a variety of products available in the market. ASTM A815 UNS S32750 Pipe Fittings are one of those products and are available in various sizes, shapes, and dimensions. ASTM A815 UNS S32760 Pipe Fittings are designed to be resistant to corrosion and are said to have perfect weldability. These Super Duplex S32750 Buttweld Fittings are resistant to erosion corrosion and fatigue. They have a mixed microstructure of 50% austenitic and 50% ferrite.

ASTM A234 WPB Pipe Fittings belong to a group of pipes and fittings that are intended for moderate to high temperature services with pressure piping. The A234 is the specification for the moderate to high temperature services where the WPB stands for grade B pressure and weldable pipes.

The alloy has excellent high-temperature oxidation resistance, good high-temperature mechanical properties and corrosion resistance, and is easy to form,

We must review the complete catalog content to ensure that system designers and users make safe product choices. When selecting a product, the overall system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Superior resistance to hydrochloric acid, aluminum chloride catalysts and other strongly reducing chemicals. Excellent high-temperature strength in inert and vacuum atmospheres.

ASTM a403 wp304 Elbow is an industrial fitting that changes the direction of a pipe. This connection allows conventional threaded pipe to be rearranged for turns or installation in limited spaces without the need to purchase a pipe bender.

ASTM B163 B407 ASME SB163 SB407 N08800 Incoloy 800 Seamless Pipe is especially suitable for high temperature equipment in the petrochemical industry because the alloy does not form an embrittled sigma phase after prolonged exposure to 1200¡ãF (649¡ãC).

These stainless steel 310S butt welded pipe fittings are used in a variety of applications such as oven fixtures, furnace parts, heat treating chambers, hydrogenation parts, jetting parts, and more. These SS 310S butt weld fittings are also primarily used in the chemical, construction and plumbing industries.

We manufacture SA403 WP 304 Short Radius and Long Radius Elbows very strong with a minimum yield strength of 205MPa and a minimum tensile strength of 515MPa. These work well in high temperature environments up to 870 degrees Celsius.

These fittings don‘t deform or dissociate easily at high pressures and elevated temperatures. The Alloy 600 Fittings possess superior strength and excellent mechanical properties. They possess a minimum tensile strength of 655Mpa and a minimum yield strength of 310 Mpa.

What makes this material a cost-effective alternative is that the nickel content that manufacturers use to produce dual-phase steel butt-welded pipe fittings is lower than that of super-duplex steel. While the reduction in nickel content gives the metal lower mechanical properties, the higher molybdenum and chromium content almost makes up for the lack of nickel in duplex stainless steel fittings.

HASTELLOY X pipe bend also resists carburization and nitriding, two common conditions which often lead to early failure in high-temperature alloys. After 100 hours in petroleum coke, four other materials were completely penetrated by carburization and whereas.

This nickel alloy is attacked in sulfur-bearing gases above approximately 700¡ã F and molten sulfur attacks the alloy at temperatures over approximately 500¡ã F.

This is a nickel-copper, solid-solution alloy that is hardenable only by cold working. It has high strength and toughness over a wide temperature range and is resistant to many corrosive environments.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

Alloy 20 was originally developed for use in sulfuric acid service found in facilities such as pulp and paper mills. With good general corrosion properties, Alloy 20 usage has expanded in chemical, petrochemical and power generation plants.

ASTM A403 WP317L is a molybdenum bearing, low carbon content “L” grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. ASTM A403 WP317 Pipe Fittings could be a altered adaptation of Stainless Steel 317L Pipe Fittings.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

we are suppliers of we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings