3-8 in. socket weld union elbows Alloy 201nickel 201UNS 2201 elbow 3000lb forged stainless steel pipe fitting

The LTCS A420 WPL6 Weld Fittings are greatly resistant against the sea water and marine environments with 1/8 inches to 48 inches nominal bore sizes.

The alloy is used extensively in the chemical industry for its strength and corrosion resistance.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A403 WP321H is the higher carbon (0.04¨C0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000¡ãF (537¡ãC). In most instances, the carbon content of the plate enables dual certification. Alloy 321 cannot be hardened by heat treatment, only by cold working. It can be easily welded and processed by standard shop fabrication practices.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Monel 400 has excellent resistance to chloride ion stress corrosion cracking.

The Stainless Steel 304 Tee or seamless fittings could be used based on the application requirements.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A234 is a standard specification for steel pipe fittings, including carbon and alloy steel materials for medium and high temperature service. It covers seamless and welded types of steel fittings. Steel pipe fittings are used in the manufacture of pressure pipes and pressure vessels. These fitting materials include killed steel, forgings, bar, sheet, seamless or HFW (fusion welded) pipe products with added filler metals.

Incoloy 800 pipe fittings, resistant to seawater and salt water even in reducing environments.

309 Pipe Fittings are manufactured and finished according to international standards ASTM A403 WP309, ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28

HASTELLOY X pipe bend is recommended especially for use in furnace applications because it has unusual resistance to oxidizing, reducing, and neutral atmospheres.

Alloy 20 is also known as UNS N08020 which is a stainless steel grade containing high alloy with excellent resistance to stress corrosion and sulfuric acid. This alloy grade contains various elements like copper, nickel; chromium and molybdenum that together help in offering crevice corrosion, resistance to corrosion and pitting.

Advantages of 304/304L stainless steel pipe fittings, 304/304L flanges Excellent corrosion resistance in a wide range of atmospheric environments, good oxidation resistance in intermittent use at 870¡ãC and continuous use at 925¡ãC, good Resistant to carbide precipitation, good machinability, stainless steel 304H provides higher strength at elevated temperatures and excellent weldability with and without filler metals.

Stainless steel 310 elbow butt welded pipe fittings are also used in most large modern structures such as stadiums and skyscrapers, bridges and airports. Even those with concrete structures are reinforced with stainless steel 310S tee butt welded pipe fittings, and it is also widely used in major appliances and automobiles.

Grade 430 is a ferritic, straight chromium, non-hardenable grade, combining good corrosion resistance and formability characteristics with useful mechanical properties. Its ability to resist nitric acid attack permits its use in specific chemical applications but automotive trim and appliance components represents its largest fields of application.

Hastelloy X pipe bend is corrosion resistant, heat resistant and oxidation resistant, being able to withstand reducing or neutral atmospheres and oxidation.

Austenitic stainless steels are susceptible to stress corrosion cracking (SCC) in halide environments. Although type 316 alloys are more resistant to SCC than 18Cr-8 Ni alloys due to their molybdenum content, they are still susceptible. Conditions that produce SCC are: (1) the presence of halide ions (usually chloride ions), (2) residual tensile stress, and (3) temperatures in excess of about 120¡ãF (49¡ãC).

HT Pipe is the well-acknowledged manufacturer and exporter of the high quality of Super Duplex Steel UNS S32750 Pipe Fittings. These are found utilized into outlet gas desulfurization systems. SD UNS S32750 butt-weld fittings are used in the applications that are food industry related such as vegetables, corn processing, etc.

The cast stainless steel pipe fittings such as 304 or 3016l are available in several different types for use in different applications such as threaded, flared, without flare and flange adapters. They provide a safe and leak-proof seal for refineries, chemical processing units, power supply units, and different processing lines. They are suitable for high-pressure applications as well as high temperatures, for instance, nuclear industry and petrochemical, etc.

Werkstoff No.1.4436 316 stainless steel fittings are resistant to atmospheric corrosion, as well as moderately oxidizing and reducing environments. Corrosion resistant in polluted marine atmospheres. It has excellent resistance to intergranular corrosion.

310S stainless steel has good high temperature resistance. When the temperature exceeds 800 [1], it begins to soften, and the allowable stress begins to decrease continuously. The maximum operating temperature is 1200 ¡ãC. Due to the high content of nickel (Ni) and chromium (Cr), it has good oxidation resistance, corrosion resistance, acid and alkali resistance, and high temperature resistance. After the content, the strength is improved due to its solid solution strengthening effect. The chemical composition characteristics of austenitic stainless steel are based on chromium and nickel with elements such as molybdenum, tungsten, niobium and titanium added. Therefore, it has high strength and creep strength at high temperature.

The ASTM A403 specification also requires Werkstoff No. 1.4436 316 stainless steel chemical composition fittings to meet standards for elements such as carbon, silicon, chromium, manganese, phosphorus, sulfur, molybdenum, and titanium. To check the conformance of these ASME B16.9 SS 316 fittings, they are subjected to chemical and product analysis.

Duplex UNS S31803 butt welded pipe fittings are duplex ferritic austenitic 22% chromium, 3% molybdenum, 5% to 6% nickel alloy stainless steel. Duplex UNS S31803 butt welded pipe fittings are formed according to the crystal structure of stainless steel.

These duplex accessories are supplied in various industries such as brewing tanks, boiler construction and desalination plants. We stock a full line of 2205 Duplex Fittings to meet your piping requirements.

Stainless Steel Elbow Buttweld Welded Pipe Fittings?is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress ¨C corrosion cracking, carburization, and excellent resistance to reducing or carburizing atmospheres.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

UNS S31803 pipe fittings is a duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades.

Often the angle of elbow is 90 degrees but there are different types of elbows with different angles as well. The Carbon steel welded pipe fittings are also one of the cost efficient methods to apply with other types of steel.