3-8 in. welded 3000lb steel pipe fittings S31803 elbows

S32205 is a duplex stainless steel with twice the strength of austenitic stainless steel. Duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local stress corrosion resistance. The yield strength of duplex stainless steels is twice that of austenitic stainless steels, a feature that allows designers to reduce weight when designing products, making this alloy more affordable than 316, 317L. This alloy is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some limitations, especially when applied to welded structures. Duplex stainless steel has twice the compressive strength compared to austenitic stainless steel, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range, and can also be used at lower temperatures under severe restrictions (especially for welded structures).

This durability is an extension of their chemical composition and the biphasic they exhibit. Duplex alloys are neither fully austenitic nor fully ferritic. As a result, the duplex nature of duplex steel butt welded fittings makes them one of the toughest alloys around.

Stainless Steel 316 is an austenitic grade designed with excellent nickel and chromium content. This grade also contains a small amount of silicon, which improves the oxidation resistance of the module. In fact, stainless steel 1.4401 is often used in process streams containing halides such as chlorides because of its resistance to said compounds. The addition of molybdenum to stainless steel 316 tube alloys not only improves resistance to chloride pitting but also general corrosion.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

316 Stainless Steel Pipe Fitting is widely used in the connection of pipe fittings. Our company has been manufacturing and supplying stainlesss steel elbow for years of experience. With the advantages of huge stock ability, we could provide you the quick delivery. Besides, with a strict quality control system, we could guarantee the quality.

Grade WPB is the most common material for medium and high temperature pipelines in these standards. W stands for “weldable,” P for “pressure,” B for “grade b,” and Y for “yield strength.”

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure.

Stainless Steel 304 Fitting Elbow is an austenitic chromium alloy with a steel composition of 18% chromium and 8% nickel. Stainless steel 304 pipe fittings have high ductility, excellent forming, spinning and drawing properties.

The arrangement of elements in the periodic chart shows how the elements are related to one another chemically. As it is in the middle of the table, we know titanium exhibits properties between those of metals and non-metals.

The specification is for pressure piping and fitting in the high or moderate temperature services.ASTM A234 (ASME SA234) pipe fittings after shaping from an elevated temperature, shall be cooled down to a temperature below critical range under suitable conditions which preventing injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Referring standard in Section 7 of ASTM A960/A960M.

We are stocking 22 WPHY 52. Petromet is distributor and dealer of Mss SP75 WPHY 52 Equal Tee, ASTM A860 WPHY 52 Reducing Tee in various sizes.

We are a well-known distributor and manufacturer of 317L Stainless Steel Disc Cover Fittings, widely known for their corrosion resistance properties. It is often considered for its compact size, high energy, durability, etc. Commonly used in chemical, cement, paper, oil and gas, petrochemical and other industries. They are made from high quality raw cloth and are noted for their close tolerances and dimensional accuracy.

These fittings are produced from the highest quality raw materials and are well tested and inspected according to national and international standards. Manufacturers offer a full range of pipes and fittings such as UNS S32205 45 degrees. Elbow, Duplex UNS S31803 Reducer, Duplex S31803 Cap, Duplex S31803 Butt Weld Fitting, 2205 Duplex 90 Degree Elbow, Duplex S32205 Butt Weld Fitting, Duplex S32205 Fitting.

HT PIPE is a leading supplier of Alloy 800 and other high-quality special metal alloys with decades of experience and extensive specifications.

This alloy is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions, it does show however better resistance to reducing media than oxidizing.

Low carbon based wrought iron high yielding A860 WPHY 70 elbow fittings are chemically composed of metallic elements like – nickel, chromium, molybdenum, manganese, copper, vanadium, titanium, niobium, sulphur, silicon and phosphorus. Addition of these metal elements to the alloy makes it stronger and gives it increased resistance to corrosion. The yield strength of WPHY 70 material is 570 Mpa and its tensile strength is 485 Mpa.

These duplex accessories are supplied in various industries such as brewing tanks, boiler construction and desalination plants. We stock a full line of 2205 Duplex Fittings to meet your piping requirements.

Stainless steel as 304 or 316 casting combines good corrosion resistance and high strength, which allows the reduction in wall thickness and weight of pipe fittings. Besides, it can withstand very high flow rates, making it capable to withstand long-term exposure to the elements in almost any environment.

All of the common methods of welding can be used to weld Hastelloy C-276 alloy, although the oxyacetylene process is not recommended. Special precautions should be taken to avoid excessive heat input.

C22 can be hot worked or cold worked. However, C22 work-hardens rapidly. Therefore, cold working must often be performed in stages with intervening anneals. Parts should be annealed after cold working.

Titanium was discovered in 1791 by the English chemist and mineralogist William Gregor. He thought it was a compound. Later, it was named after the Titan of Greek mythology by the German chemist Martin Heinrich Klapros.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions.

INCONEL (nickel-chromium-iron) alloy 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications requiring corrosion and heat resistance. The alloy also has excellent mechanical properties and has an ideal combination of high strength and good machinability.

Grade 2205 is the most widely used duplex stainless steel grade. Fittings of this grade finds applications due to both their excellent corrosion resistance as well as their high strength.

The function and material of sanitary pipe fittings are basically the same as those of industrial stainless steel pipe fittings. However, it is used in the hygiene and food industry, and can be divided into welding type, screw type and clamp type according to the connection method.

Welded A234 WPB pipe fittings mean the large sizes fittings which are pieces welded from steel plates.

There are 5 most common ASTM A234 WPB Elbow are in mainly in demand, the 45¡ã, 90¡ã and 180¡ã elbows, all three in the “long radius” version, and in addition the 90¡ã and 180¡ã elbows both in the “short radius” version.