30 elbow stainless steel pipe fitting S30400 elbows

The corrosion resistance of this alloy alone makes duplex stainless steel pipe fittings a better contender for challenging applications. Industries such as oil and gas and petrochemicals are high pressure environments. These industries need products like ASTM A815 UNS S31803 elbows that are not only standardized but also durable.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Alloy C-22 should not be used in service temperatures above 1250¡ã F due to the formation of detrimental phases which form above this temperature.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

The UNS N10276 Fittings have high tensile strength even at elevated temperatures and demonstrate good performance under high pressure. The tensile strength of the ASTM B366 UNS N10276 Stub End is about 105.4 Ksi.The ASTM B366 WPHC276 End Cap has great fabrication properties. B366 WPHC276 is easily fabricated by cold working. Although the Grade WPHC276 Reducer can be hot worked, the process needs to be carried out adhering to certain parameters

Steel tee is a kind of three T-shaped pipe fittings. Generally, there are two forms of equal diameter tee and reducing tee (reducing tee), both of which are used to divide (join) pipelines to adjust flow and change direction. Steel pipe tee has been widely used in different industries, according to the type of material: stainless steel tee, carbon steel tee
, alloy steel tee.

Austenitic stainless steels are susceptible to stress corrosion cracking (SCC) in halide environments. Although type 316 alloys are more resistant to SCC than 18Cr-8 Ni alloys due to their molybdenum content, they are still susceptible. Conditions that produce SCC are: (1) the presence of halide ions (usually chloride ions), (2) residual tensile stress, and (3) temperatures in excess of about 120¡ãF (49¡ãC).

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

We are a manufacturer, supplier and distributor of premium quality Nickel Alloy Forged Elbow. Our primary purpose in providing this product is to understand and meet our customers’ operational requirements. We have supplied these products to large industrial sectors for many years and have earned the trust and satisfaction of our valued customers.

UNS N02200 nickel alloy pipe fittings are manufactured from high grade, commercially pure (99.6%) wrought nickel. Nickel 200 fittings are ideal for a wide range of industries including chemical equipment, gas processing, heat exchangers, pharmaceuticals, power generation, and more.

Forged fittings produced in a facility covered by the ASME B16.9 standard must be manufactured in accordance with ASTM A 403. Molybdenum bearing stainless steel 316L fittings are also known as marine grade due to their excellent resistance in marine environments. While the chemical composition of grade 316L is similar to that of grade 316 stainless steel, the main difference between the two alloys is the nitrogen and carbon content.

Stainless steel pipe fitting is part that connect pipe to pipe, its purpose to connect, control and change the direction, split, sealed, support various parts and components in pipeline system, selecting and preparing proper pipe fitting to joint together, there are various types, sizes, grades & specifications to meet specific requirement.

ASTM A234 is the standard specification for pipe fittings of wrought carbon steel and alloy steel for moderate and high-temperature service. Carbon steel pipe fittings manufactured to ASMT A234 are usually furnished in butt-welding form in accordance with ASME B16.9 or ASME B16.49. There are two carbon steel grades: WPB and WPC, of which ASTM A234 WPB is mostly often used in pipeline industry. The A234 WPB butt-welding pipe fittings include elbows, bends, returns, tees, reducers, end caps, crosses, lap joint stub ends, nipples and couplings.
After forming at an elevated temperature, fittings are cooled to a temperature below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Heat treatment temperatures specified are metal (part) temperatures. Heat-treated fittings are to be treated according to paragraph 7 in Specification A960/A960M.

Werkstoff No 1.4462 Duplex Steel Pipe Fittings have a high resistance to intergranular corrosion, especially in chloride and sulphide containing environments. Usually, a regular steels grade would be susceptible to getting degraded in these conditions, unlike Duplex Stainless Steel Fittings, which exhibit very high resistance to stress related corrosion cracking.

These fittings material consist of killed steel, forgings, bars, plates, seamless or HFW (fusion welded) pipe products, with filler metal added.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The Inconel 600 Pipe Fittings are made with high concentrations of chromium, nickel, and molybdenum. This composition of chemicals gives it excellent resistance against all forms of corrosion and oxidation.

Since the Stainless steel 90 degree elbow is sold as per pipe fitting it is important to know the pipe schedule this helps in matching the ID of the fitting to that of the pipe. 150# stainless steel socket weld fittings are available in both seamless and welded conditions.

321 stainless steel, also known as UNS S32100 and Grade 321, is primarily comprised of 17% to 19% chromium, 12% nickel, .25% to 1% silicon, 2% maximum manganese, traces of phosphorus and sulfur, 5 x (c + n) .70% titanium, with the balance being iron. With regards to corrosion resistance, 321 Stainless Steel is equivalent to Grade 304 in the annealed condition and is superior if the application involves service in the 797¡ã to 1652¡ã F range. 321 Stainless Steel combines high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.
UNS S32100 Reducing Tee is preferred due to its ability to work in high pressure and temperature even at a higher temperature.
Stainless Steel 321 / 321H Pipe Fittings are used in filtration, refrigeration, oil, gas, petrochemical and in offshore oil drilling industries. The material has chromium, nickel, titanium and other elements along with carbon. The 321H has higher carbon than the other versions. There are different types of fittings such as the 321/321H Stainless Steel Buttweld Fittings which are most commonly used but there are also the seamless fittings. The Stainless Steel UNS S32100 Pipe Elbow is a fitting type that is used in high temperature applications to change direction of flow.

Applications in the chemical process industry involving sulfuric, phosphoric, hydrochloric and acetic acid.

Stainless Steel 304 Pipe Fittings are made up of 18/8 chromium nickel alloy steels. The SS 304 Elbow has 18% chromium and 8%nickel in its composition. This makes the SS UNS S30400 Buttweld Fitting to be stronger with 215MPa minimum yield strength and 505MPa minimum tensile strength. The combination makes Stainless Steel 304 Buttweld Pipe Fittings corrosion resistant and high temperature capable up to 889 degrees Celsius.

Several grades are also involved like ASTM A815 UNS S31803, A815 UNS S32750 lot more. ASTM A815 WPS 32750 Elbowpipe fittings is usually design to work as in high strength, corrosion resistance to be high, perfect weldability. All these features will be available in the product manufactured by us.As earlier said that there are several types of grades,A815 UNS S32750 Duplex Tube fittings is one of them.

While our stainless steel 316 elbow fittings have only been produced for many years, stainless steel should theoretically last for centuries with the right choice. What’s particularly exciting about these stainless steel 316 stub ends is that considering some of the same factors that make stainless steel an excellent environmental choice, it can also make it an excellent economical choice, especially when considering the life cycle cost of the project.

Strengthening of super alloy Hastelloy B2 pipe bend is performed by solid-solution hardening, work hardening, and precipitation hardening methods.

In industry, pipes are used for transportation. Fluids, liquids, gases, and other products are often transported by pipelines in industry. Industrial pipes are extremely prone to dust, debris and damage, so to protect the pipe and its ends, pipe caps are widely used. We provide 1-4 to 4 chinese ss304 ss316 2205 stainless steel pipe fitting cap.

ASTM A403 WP316 Fittings are a grade of pipe fittings that are made up of a high oxidation resistant material. This material is also corrosion resistive, pitting resistive and can withstand strong chemicals and acids. The high temperature and pressure tolerance of this material makes the A403 WP316 Elbow to perform better under the corrosive high pressure curvatures of piping. The corrosion in fluid direction changing joints is high. Due to the impact of the fluid flow, the fitting might break if there was corrosion and or thermal expansion.

ASTM A420 is the standard specification for pipe fittings of carbon steel and alloy steel used for low temperature services. WPL6 is the most used grade material under A420.

Besides Grade WPL6, the standard also includes WPL9, WPL3, WPL8, impact test temperature correspondingly at -45¡æ, -75¡æ, -100¡æ, -195¡æ.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys and it was slightly modified into Incoloy 800H.