3000lb-6000lb BW stainless steel pipe fittings 304l elbows

C22 can be hot worked or cold worked. However, C22 work-hardens rapidly. Therefore, cold working must often be performed in stages with intervening anneals. Parts should be annealed after cold working.

Stainless Steel Duplex 2205 is the most widely used duplex (ferritic/austenitic) stainless steel grade. It finds applications due to both excellent corrosion resistance and high strength. Duplex 2205 is a nitrogen enhanced stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels.

uns s30400 pipe fittings are used in petroleum, petrochemical, power plants and other general corrosion services.

The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Incoloy 800H/HT alloy was intended for high temperature structural applications.

The Stainless Steel Tee Fittings is available in different grades, materials, sizes, finishes, etc. The industry is having a professional team that is looking after the entire production of the Stainless Steel Tee Fittings that is assuring in supplying the defect-free product.

2205 fittings are highly demanded for the unique characteristics and performance they exhibit in their application. These products are manufactured and delivered in various shapes and sizes according to customer requirements. These pipes are transported to various industries including storage tanks, boiler production and desalination plants. The percentage of alloying elements used in the manufacture of fittings and duplex stainless steel pipes is lower at lower cost.

WPHY 52 Pipe fittings are manufactured as per MSS SP 75 shall be furnished in the heat treated condition.We offer a wide assortment of ASTM A860 WPHY 52 Fittings that cater to the prerequisite of different industries such as engineering, chemical, refineries, machine apparatuses, and numerous others.

Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee (Tee reducer), both are used to divide (combine) the pipelines to adjust the flow rate and change the direction.

Butt weld tee dimensions shall be specified in pipe NPS (DN) and thickness in schedule, where socket weld tee or threaded tee thickness specified in pressure class ratings.

HASTELLOY X pipe bend also resists carburization and nitriding, two common conditions which often lead to early failure in high-temperature alloys. After 100 hours in petroleum coke, four other materials were completely penetrated by carburization and whereas.

This series clamp tee sanitary fitting is made of stainless steel 4 and clamps to tubing on all three ends. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee.

We are a manufacturer, supplier and distributor of premium quality Nickel Alloy Forged Elbow. Our primary purpose in providing this product is to understand and meet our customers’ operational requirements. We have supplied these products to large industrial sectors for many years and have earned the trust and satisfaction of our valued customers.

Its strength as well as its resistance to corrosion and stress make Inconel 625 elbow a suitable component of nuclear reactors, particularly in the control rod and reactor core.

Think wisely and do contact us as we also export this product overseas and everywhere, we are familiar for S32750 Duplex seamless pipe fittings.

ASTM A234 is the standard specification for pipe fittings of wrought carbon steel and alloy steel for moderate and high-temperature service. Carbon steel pipe fittings manufactured to ASMT A234 are usually furnished in butt-welding form in accordance with ASME B16.9 or ASME B16.49. There are two carbon steel grades: WPB and WPC, of which ASTM A234 WPB is mostly often used in pipeline industry. The A234 WPB butt-welding pipe fittings include elbows, bends, returns, tees, reducers, end caps, crosses, lap joint stub ends, nipples and couplings.
After forming at an elevated temperature, fittings are cooled to a temperature below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Heat treatment temperatures specified are metal (part) temperatures. Heat-treated fittings are to be treated according to paragraph 7 in Specification A960/A960M.

The heat-affected weld zones have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance.

Stainless steel such as 304 and 316L casting of pipe fittings requires low maintenance and does not need an additional coating, in both indoor and outdoor applications. The expected lifetime of a stainless steel pipe fitting is more than 50 years, reducing system down time, replacement and maintenance costs over the life of the installation.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The tensile strength of this superalloy is 690 MPa, while its yield strength measures 275 MPa.

800H is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450¡ãF.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

The alloy matrix is strengthened by the interaction of niobium with molybdenum that offers high strength without the need for precipitation-hardening treatment.

ASTM B366 UNS N08800 N06625 N08020 N04400 N06600 N08904 N08031 180deg ELBOW ASME B16.9 features corrosion resistance, accurate dimensions, withstands high pressure and high temperature loads, rust-resistant finish, smooth transition from flange thickness to pipe and ensures excellent stress distribution.

Monel K500 pipe bend and elbow has excellent mechanical properties from sub-zero temperatures up to about 480C.

Incoloy 800H is a solution heat treated, carbon controlled version of its parent Alloy 800.

UNS N02200 nickel alloy pipe fittings are manufactured from high grade, commercially pure (99.6%) wrought nickel. Nickel 200 fittings are ideal for a wide range of industries including chemical equipment, gas processing, heat exchangers, pharmaceuticals, power generation, and more.

These A234 WP9 Alloy Steel Reducer are relevant to use in low-pressure product flow services, however, their working pressure can vary depending upon the pipe’s built.This is because of the decreased inclination to accelerate malicious inter-metallic stages in these Alloy Steel WP9 Stub End, subsequently, bearing it more noteworthy flexibility than different alloys amid and following different thermal cycling conditions.

ASTM A234 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97.

The difference between 304 and 304L stainless steel is that 304L has a .03 max carbon and is good for welding whereas 304 has a mid range level of carbon.

The strength of Inconel 625 lies not only in its nickel-chromium base but also the hardening mechanism of niobium and molybdenum.