3000lbs steel pipe fitting ASTM A815 S32750 reducer 2507 reducer

HASTELLOY X pipe bend finds use in petrochemical process equipment and gas turbines in the hot combustor zone sections. Also used for structural components in industrial furnace applications because of the excellent oxidation resistance.

Stainless steel pipe is a kind of hollow long round steel or square rectangular material, which is widely used in industrial transmission pipelines and mechanical structural parts. In addition, with the same bending and torsional strength, stainless steel pipes are lighter in weight, so stainless steel pipes are also widely used in the manufacture of mechanical parts and engineering structures.

30 deg long radius 304 316 321 stainless steel pipe fittings weld S30400 elbow for incredible corrosion resistance in chemical environments containing phosphoric, nitric, sulphuric and chloride acids. However, it is significantly resistant to warm sulfuric acid. The increased power of the tube may also require better forming pressures.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction.

The SA 420 WPL6 Elbow is one of the most used types in many applications because it is needed to change the direction of a pipe line.

Traditionally, duplex steels have a chromium content of about 22% by weight. Likewise, stainless grade 2205 is a duplex stainless steel with 22% chromium in the alloy. The higher chromium content in Duplex 2205 fittings provides several benefits, including higher yield strength, better mechanical properties, and excellent corrosion resistance.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

Alloy C276 is increasingly used in aggressive or corrosive environments where other alloys fail.

348 Stainless Steel is a high moly austenitic grade alloy available in form of Pipe, Tubing, Pipe Fittings, Flanges, Valves, Fasteners, Round Bar & Plates.

Stainless Steel Pipe Bends are widely used in high-temperature applications.

The ASTM A403 WP316L grade is a wrought carbon grade that possesses excellent toughness and offers higher creep and stress rupture properties.

These industries are rely on MSS SP75 WPHY 52 Welded Pipe Fittings and MSS SP75 WPHY Grade 52 Seamless Pipe Fitting because these fittings can withstand severe corrosion problems in harsh conditions.ASTM A860 WPHY 52 are Created High Yield fittings and are by and large utilized at High-pressure prerequisites.

Hastelloy C276 fittings can withstand very high pressures and come with a one-year warranty. The V shape is perfect for welding and fabrication.

The advantages of stainless steel butt-weld end caps include permanent leakage prevention, increased strength and power of the pipeline structure, and reduced pressure loss, but the stainless steel cap is firmly fixed and cannot be loosened like a blind man to enter the pipeline flange.

We are Manufacturer, Supplier and Exporter of Stainless Steel 304 Pipe Fittings with some amazing highlights such as strong, strong, flawless, high rigidity, corrosion resistant and this is just the beginning. Buy SS 304 Butt Weld Fittings from us at a reasonable cost. Significant consumption contrast, reduced carbon content, and high quality make 304 stainless steel butt welded pipe fittings amenable to the ability to weld where required.

Type : Seamless / Welded.This steel type contains as low as 0.03% of carbon content and thus reduces its susceptibility to intergranular corrosion.

To prevent sensitization and the resulting intergranular corrosion, it carries niobium. It has advanced SCC resistance in boiling 20% to 40% sulfuric acid. Neither pre-weld nor post-weld thermal remedies are required in WNR 1.4306 Pipe Fittings. It is manufactured without difficulty by means of traditional commercial craftsmanship.

Furnace rolls made of this alloy were still in good condition after operating for 8700 hours at 2150 Deg. F. Furnace trays, used to support heavy loads, have been exposed to temperatures up to 2300 Deg. F. in an oxidizing atmosphere without bending or warping.

316 stainless steel pipe bend can be used with seawater, provided precautions are taken to avoid crevice corrosion developing under sediments, precipitation and biofouling, and at designed-in crevices.

WPB is the most commonly used carbon steel pipe fitting material for medium and high temperature application now, it can be made by steel pipe like ASTM A106 Gr.C or steel plate like ASTM A285 GR.C.

304 fittings are standard “18/8” stainless steel; it is the most versatile and widely used stainless steel available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics.

ss 304L seamless pipe fittings are ideal for installation in pipes subject to high pressure, corrosion and vibration conditions. It is suitable for pressurized and non-pressurized applications; it is available in a variety of construction materials, depending on the nature of the medium to be transported.

The main difference between stainless steel bottle caps and carbon steel bottle caps is the difference in material. The chemicals contained in stainless steel caps will keep the surface of the cap from rusting and corroding for a long time.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

Incoloy 800 pipe fittings, resistant to seawater and salt water even in reducing environments.

Stainless Steel Pipe Fittings are used in the water pipeline, natural gas, fabrication, and nuclear power plant industry.

Stainless steel types 1.4401 and 1.4404 are also known as grades 316 and 316L respectively. Grade 316 is an austenitic grade second only to 304 in commercial importance.

ASTM A420 WPL6 are widely utilized in pressure piping and pressure vessel service at low-temperatures.

Inconel 625 is a non-magnetic nickel-based alloy. Known for its high strength and toughness, high corrosion and oxidation resistance, and excellent fatigue strength, Inconel 625? also offers a very wide operating temperature range, from cryogenics to 2,000¡ãF (1,093¡ãC).