304 304L 310S 347 food grade stainless steel pipe fitting sanitary elbows of high quality

304 fittings meet steel 304 strength standards and 304L ultra-low carbon standards. Fittings are components used in many different industries to connect, terminate, control flow and change the direction of pipes.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

For high temperature applications, the high carbon variant 316H stainless steel and the stabilized grade 316Ti stainless steel should be used.

Monel 400 provide superior quality for different types of mechanical, and general engineering applications.

When it comes to connecting different sections of carbon steel pipes, ASME B16.9 A234 WPB Carbon Steel Pipe Butt Welded Fittings are the go-to solution. These fittings are designed to provide a reliable and secure connection, while also ensuring excellent flow through the system.

Fittings are used to change the direction of the pipe. The easiest way is to bend the pipe. However, it stretches and thins the outer wall of the pipe. It also thickens the inner walls of the pipe. 2205 duplex stainless steel fittings are known for their austenitic and ferritic microstructures. They show the properties of both classes. ASME SA815 Duplex Steel Butt Welded Pipe Fittings show improved localized corrosion resistance compared to Grades 316 and 317.

C276 Elbow has excellent corrosion resistance to a wide range of concentrated hot acids and reducing environments and can be easily used in hot sulfuric and hydrochloric applications.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

Grade 2205 is the most widely used duplex stainless steel grade. Fittings of this grade finds applications due to both their excellent corrosion resistance as well as their high strength.

We can manufacture and supply high quality carbon steel pipe elbows with bending radius ranging from R=3D-10D and bending angle from 10 degrees to 180 degrees. In addition, we can also manufacture carbon steel elbows according to the customized requirements of our esteemed customers. All our carbon steel fittings and flanges are supplied with relevant raw material and finished product test certificates. Carbon steel pipe elbows with bend radii of 3D, 5D and 7D are most commonly used in various industries. Our main elbow products include – high quality carbon steel long radius pigging elbows, seamless long radius pigging elbows and welded long radius pigging elbows.

ASTM A234 WPB Sch 40 Fittings covers carbon steel fittings of welded and seamless development secured by the foremost later revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. A234 WPB Carbon Steel Fittings to boot exceedingly corrosion-resistant has low string contact and profitable where high alloyed steel is required.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

It also has mechanical chambers suitable for various environments and extended temperatures. Resistant to chloride pressure corrosion cracking. Select it regularly to clear up pressure corrosion cracking problems. It is good at resisting the corrosion of warm sulfuric acid.

The alloy is not precipitation hardenable; it is hardened and strengthened only by cold work. The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000¡ãF (1095¡ãC).

Stainless Steel Buttweld Fittings used in pressure piping frameworks of direct and high-temperature administrators.

MONEL K500 is non-magnetic. MONEL K500 should be annealed when welded and the weldment then stress relieved before aging.

Cuni 70/30 elbows have superior strength to withstand higher speeds in seawater.

SA 815 S31803 Weld Fittings have exceptional chemical properties along with higher strength and good resistance to corrosion. Therefore this grade is used for fitting manufacturing. SA 815 S31803 Long/ Short Radius Elbow display outstanding resistance to pitting, crevice corrosion and have excellent weldability. They are perfect if one is looking for a sturdy pipe with good formability. ASME B16.9 WPS UNS S31803 Elbow also exhibits excellent resistance to acetic and marine environments.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

An elbow is a fitting usually available in acrylonitrile butadiene styrene, polyvinyl chloride, chlorinated polyvinyl chloride, and copper. They¡¯re used in DWV systems, wastewater, and central vacuum systems.

Although HASTELLOY X pipe bend is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress-corrosion cracking and has good resistance to carburization, excellent resistance to reducing or carburizing atmospheres.

CS ASTM A420 WPL3 Pipe Fittings are combines Good ductility, High strength, Tensile strength, Yield strength, Fatigue resistance, Toughness, Wear resistance and Outstanding corrosion resistance qualities.

ASTM A234 WPB Pipe Fittings belong to a group of pipes and fittings that are intended for moderate to high temperature services with pressure piping. The A234 is the specification for the moderate to high temperature services where the WPB stands for grade B pressure and weldable pipes.

A860 WPHY 42 Pipe Fittings are a pre-requisite for the conveyance of gas and oil in the high-pressure gas and oil transportation systems.

It is even resistant to strong liquids such as sulfuric acid, wet chlorine gas, chloride solutions, hydrochloric acid and most organic acids. However, it can burn in air and is the only element that will burn in the presence of nitrogen.

Stainless Grade 347 | UNS# S34700 is a stabilized austenitic stainless steel very similar to Grade/Alloy 304, containing niobium and tantalum. To avoid chromium carbide precipitation, columbium is used for stabilization.

ASTM A420 covers elbow, tee, reducer, cap, union and etc, which manufactured according to ASME B16.9, ASME B16.11, MSS SP-79 and MSS SP-95, types in seamless and welded structual pipe fittings.

Duplex 31803/32205 fittings offer high resistance to crevice and chloride corrosion. This resistance is important for services such as brine, control system water systems, marine environments, and some food processing applications.