304 304L 310S 347 stainless steel pipe fittings water elbows water pipe fitting for auto cooling

Another key feature of duplex stainless steel is its enhanced corrosion resistance. Due to its higher strength, longer component life cycle and lower alloy composition, duplex stainless steels can be a very cost-effective solution to engineering problems.

Our inventory includes but is not limited to carbon steel, stainless steel, PVC S80, CPVC S80 and specialty alloy materials. Our highly trained staff will help you with piping, flanges, fittings, structural shapes and related components.

30 deg long radius 304 316 321 stainless steel pipe fittings weld S30400 elbow for incredible corrosion resistance in chemical environments containing phosphoric, nitric, sulphuric and chloride acids. However, it is significantly resistant to warm sulfuric acid. The increased power of the tube may also require better forming pressures.

Being a two ¨C phase material (austenitic ¨C ferritic) stainless Steel BW Pipe Fittings will present a different tool wear profile from that of single ¨C phase steels of type 304L.

The SS 304 Elbow is one of the key components in the pressure piping system. It basically helps to change the direction of flow in the pipe run. These ASTM A403 Gr WP304 Buttweld Fittings help to connect two pipes with the same or different nominal diameters so as to change the fluid direction by 45 or 90 degrees.

Incoloy 800H and 800HT are typically used in parts above 1100¡ãF where creep and fracture resistance is required. The chemical balance allows nickel steel alloys to exhibit excellent resistance to carburizing, oxidizing and nitriding atmospheres. Incoloy 800HT will not become brittle even after prolonged use in the 1200-1600¡ã F range where many stainless steels become brittle. 800HT exhibits the excellent cold forming qualities normally associated with Nichrome.

A234 WP91 is one of the steel grade in ASTM A234 standard.W means weldable,P means pressure,91 is grade 91.the starting material is ASTM A335 Gr P91 Seamless pipes,widely used for POWER PLANT FABRICATION,Chemical & Fertilizers, Power Generation and Nuclear Industries.

The stainless steel pipe fittings are available in different cast stainless steel grades including 304, 316, and 316L stainless steel. Different casting grades of stainless steel are suitable for different environments.

We are a well-known distributor and manufacturer of 317L Stainless Steel Disc Cover Fittings, widely known for their corrosion resistance properties. It is often considered for its compact size, high energy, durability, etc. Commonly used in chemical, cement, paper, oil and gas, petrochemical and other industries. They are made from high quality raw cloth and are noted for their close tolerances and dimensional accuracy.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The superposition of residual stress caused by cold working and aging thermal stress, as well as the preferential embrittlement of the surface layer at the initial stage of aging, are the main reasons for aging cracking of Monel K500 alloy.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Stainless steel grade 316Ti is a titanium stabilized version of alloy 316. This austenitic chromium-nickel stainless steel grade contains substantial addition of molybdenum which is why the Stainless Steel 316Ti Pipe Fittings exhibits several important characteristics. For instance, grade 316Ti show an increase in the corrosion resistance properties along with improved resistance to pitting chloride ion solutions as well as increased tensile strength at elevated temperatures.

Nickel in elemental form or in alloys with other metals and materials makes a significant contribution to society today and is expected to continue to provide materials for a more demanding future. Nickel is a versatile element that forms alloys with most metals.

ASTM A403 WP317L is a molybdenum bearing, low carbon content “L” grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. ASTM A403 WP317 Pipe Fittings could be a altered adaptation of Stainless Steel 317L Pipe Fittings.

Inconel 600/601/625/718 also protects welded joints against pitting/oxidation, crevice resistance and other properties. Even this product gives you more tensile strength than any other product. The main features of this product are flexibility, robust construction, high durability, and high temperature resistance. Butt welded joints are able to handle temperature and atmospheric pressure. It’s all thanks to the quality of the alloy.

ASTM A403 WP347 is a non-heat treatable, austenitic, electric furnace processed grade of stainless steel very similar in composition to Type 321. Type 347 can withstand more severely elevated temperatures than Type 321, as the resulting columbium carbide is more stable and insoluble than the titanium carbide.

A234 WPB SCH 80 Elbow is a standardization that conforms to schedule 80. ASTM A234 WPB Elbow could also be threaded or machined; sometimes it is also socketed.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

A high nickel alloy with the addition of substantial amounts of copper to give the alloy excellent resistance to sodium chloride solutions, including brine and seawater. Therefore, UNS N04400 Alloy 400 Forged Fittings and Socket Weld Elbows can be used as part of an offshore piping system that may require a change of direction.

Grade 316 pipe bend also has given excellent service in potable water. Pitting and crevice corrosion may occur in waters with higher chloride content, and 2000 ppm is accepted as the upper limit. The higher molybdenum content of 316 make it significantly more corrosion resistant than grade 304.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions.

316 Stainless Steel Pipe Fitting is widely used in the connection of pipe fittings. Our company has been manufacturing and supplying stainlesss steel elbow for years of experience. With the advantages of huge stock ability, we could provide you the quick delivery. Besides, with a strict quality control system, we could guarantee the quality.

A860 WPHY 42 Pipe Fittings are a pre-requisite for the conveyance of gas and oil in the high-pressure gas and oil transportation systems.

For stainless steel sanitary fittings we offers a large selection of high purity food grade sanitary hose fittings, stainless sanitary tubing, sanitary valves and fittings, steel tubing clamps, etc. Contact us for a sanitary fittings price list.

These fittings contain small amounts of additional copper, titanium and molybdenum, which improve their chemical and mechanical properties. Our UNS N08825 Incoloy 825 elbows have been designed to provide increased resistance to crevice and pitting corrosion and to operate smoothly at moderately elevated temperatures.

With the addition of niobium stainless steel WNR 1.4401 fittings, the fittings become stable against sensitization and the resulting intergranular corrosion. It also prevents intergranular corrosion in the welded state. It can also be thermoformed by using the isoforce required to heat austenitic steels. It has precise mechanical housing for every environment and elevated temperature. The copper-containing material in the fittings protects them from sulfuric acid.

Several grades are also involved like ASTM A815 UNS S31803, A815 UNS S32750 lot more. ASTM A815 WPS 32750 Elbowpipe fittings is usually design to work as in high strength, corrosion resistance to be high, perfect weldability. All these features will be available in the product manufactured by us.As earlier said that there are several types of grades,A815 UNS S32750 Duplex Tube fittings is one of them.