304 304L 316 316L stainless steel connector female pipe fittings elbows

Alloy 410, is the essential, general purpose martensite stainless steel that¡¯s used for very stressed elements and provides sensible corrosion resistance, and a high strength and hardness. Alloy 410, contains a minimum of 11 .5% metal that¡¯s simply adequate to demonstrate corrosion resistance properties in delicate atmospheres, steam, and much of delicate chemical environments.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

254 SMO is a high-alloy austenitic stainless steel developed for use in seawater and other corrosive chlorine-containing media. The steel has the following characteristics: excellent resistance to pitting and crevice corrosion, high resistance to general corrosion, high resistance to stress corrosion cracking, higher strength than conventional austenitic stainless steels, and good weldability.

Another key feature of duplex stainless steel is its enhanced corrosion resistance. Due to its higher strength, longer component life cycle and lower alloy composition, duplex stainless steels can be a very cost-effective solution to engineering problems.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

ASTM A403 WP316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

Grade WPB fittings made from the steel pipes or plates maximum C is 0.35%.

The stability of niobium allows pipe fittings to be used in corrosive environments in the as-welded state. It also hardens best with the help of using working temperature. It also offers significant corrosion resistance with extremely clean fabrication and increased mechanical housing. Stainless steel UNS S31600 fittings meet or exceed unique corporate requirements, including ISO, DIN, ASTM and ASME requirements.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

INCOLOY Alloy 800 (UNS N08800/W. Nr. 1.4876) is a widely used material for the manufacture of equipment requiring corrosion resistance, heat resistance, strength and stability, operating temperatures up to 1500¡ãF (816¡ãC) ).

Duplex 2507 possesses excellent mechanical properties. Often a light gauge of 2507 material can be used to achieve the same design strength of a thicker nickel alloy. The resulting savings in weight can dramatically reduce the overall cost of fabrication.

Corrosion resistance of duplex steel radius fittings provided. Comparable to standard austenitic grades or high alloyed ferrites. While duplex steels have good high temperature oxidation resistance like other duplex stainless steels, embrittlement can occur even at temperatures above 300 degrees Celsius for short periods of time. In case of embrittlement, duplex steel stub joints can only be corrected by a complete solution annealing treatment.

ASTM B366 N08825 Incoloy 825 fittings provide smooth operation at high temperatures. Our Incoloy 825 Elbow is used in a wide variety of industries due to its corrosion resistance properties in oxidizing and reducing environments.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Different pipe fittings have different materials. The main difference between carbon steel pipe fittings and stainless steel pipe fittings is steel, and stainless steel belongs to alloy steel.

A pipe cap, also known as a head, a plug, and a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug. Stainless steel caps are made of stainless steel. HT PIPE is a high quality stainless steel pipe cap supplier, manufacturer, exporter, wholesaler, factory and company in China, mainly exporting high quality 304/316 stainless steel threaded pipe caps.

Used in chemical and petroleum processing, in power plants for superheater and reheater tubing, in industrial furnaces, and for heat treating equipment.

Type 316 is much more resistant to sulfuric acid solutions than any other chromium-nickel type. Type 316 is resistant to acid concentrations up to 5% at temperatures up to 120¡ãF (49¡ãC). This type has excellent resistance to higher concentrations at temperatures below 100¡ã F (38¡ã C).

Inconel 601 (N06601) nickel-based alloy plasticity:
Inconel 601 (UNS N06601) nickel base alloy is relatively easy to hot work. The heating temperature is 1150~1200C, and the thermal processing temperature is
1050~1200C, simple processing can be carried out below 850¡ãC.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless Steel A403 WPS31254 contains higher chromium and low carbon content. Lower carbon means less chromium carbide precipitation due to welding. This steel type contains as low as 0.03% of carbon content and thus reduces its susceptibility to intergranular corrosion. This kind of steel can be continuously exposed to temperatures of about 1500 without appreciable scaling.

The high nickel content gives the alloy resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride-ion stress-corrosion cracking.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless Steel 310S Butt Weld Fitting (UNS S31008) is a low carbon version of Stainless Steel 310 Butt Weld Fitting. We also offer these butt welded pipe fittings in custom forms based on size and shape. The high chromium and nickel content of stainless steel 310S stud end fittings maintains a greater percentage of room temperature strength than common austenitic alloys such as SS 304.

Regarding ASTM A815 WPS31803 s32750 s32760 904L S31254 254SMO 180deg ELBOW ASME B16.9, duplex stainless steels are a family of stainless steels. These are called duplex (or austenitic-ferritic) grades because their metallurgical structure consists of roughly equal proportions of austenite (face-centered cubic lattice) and ferrite (body-centered cubic lattice) two phase composition. They are designed to provide better corrosion resistance, especially chloride stress corrosion and chloride pitting.

Sanitary Weld Elbows are perfect for permanent assembly on processing systems that require a change of fluid direction. These fittings require robust welding for installation that offers high integrity and durability in applications that require longevity and cleaning in place (CIP).

Grade 316L, the low carbon version of 316 and is immune from sensitization (grain boundary carbide precipitation).

A reputed distributor and supplier of Duplex S31803 Fittings, the most widely used duplex (ferritic/austenitic) stainless steel grade. We recognize the importance of supplying raw and pre-machined duplex UNS S31803 welded butt welded pipe fittings that are trusted for quality, mill source traceability, supply accuracy and fast delivery. Duplex UNS S31803 Elbow Fittings are extremely corrosion resistant and work hardenable alloys.

Super Duplex Stainless Buttweld Pipe Fittings, Super Duplex Steel S32760 Butt weld Pipe Fittings, 2507 Super Duplex Pipe Fittings, Super Duplex UNS S32760 Buttweld Fitting, Super Duplex Elbow Dealer in India, Global Supplier of 2507 Super Duplex Butt weld Pipe Fittings, ANSI B16.9 Super Duplex Steel Reducer.